Question about Pioneer Car Audio & Video

3 Answers

The information booklet received with my product did not have information on how to set the clock.DEH-P6000UB CD RECEIVER

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,487 Answers

Setting the clock

Use these instructions to set the clock.
1 Use MULTI-CONTROL to select
CLOCK SET.
2 Press MULTI-CONTROL to display the
setting mode.
# Press BACK to return to the previous display.
3 Press MULTI-CONTROL to select the segment
of the clock display you wish to set.
Each time you press MULTI-CONTROL, one
segment of the clock display is selected.
Hour—Minute
As you select segments of the clock display,
the selected segment blinks.
4 Turn MULTI-CONTROL to put a clock
right.
# You can also perform the same operations by
pushing MULTI-CONTROL up or down.

Hope that helps........

Posted on Jul 28, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 347 Answers

Hello jessejgnash,

Please copy this link and paste it in your brower.

You will open a webpage where you can find your manual to download. (download button at the bottom)

http://www.nodevice.com/user_manual/pioneer/car_audio/deh-p6000ub.html

Posted on Jul 28, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pioneer Master
  • 13,433 Answers

Lets see if I can get you a more detailed manual.

Posted on Jul 28, 2008

  • Ekse Jul 28, 2008


    Setting the clock

    Use these instructions to set the clock.

    1 Use MULTI-CONTROL to select

    CLOCK SET.

    2 Press MULTI-CONTROL to display the

    setting mode.

    # Press BACK to return to the previous display.

    3 Press MULTI-CONTROL to select the segment

    of the clock display you wish to set.

    Each time you press MULTI-CONTROL, one

    segment of the clock display is selected.

    Hour—Minute

    As you select segments of the clock display,

    the selected segment blinks.

    4 Turn MULTI-CONTROL to put a clock

    right.

    # You can also perform the same operations by

    pushing MULTI-CONTROL up or down.

  • Ekse Jul 28, 2008

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do u set the clock on an xdma6630 cd receiver


Press and hold AUDIO key. Using volume knob to adjust, keep clicking AUDIO to browse through all options, turning them off as they somehow disable the DISPLAY button when on. With clock on, follow the normal directions from the manual: press and hold DISPLAY button until clock blinks. Set hours and minutes with arrow buttons. Leave alone to exit. Afterward you can turn all extras back on with AUDIO button/VOLUME knob.
Buxtor@hotmail.com and skype

Jun 29, 2011 | Car Audio & Video

1 Answer

Does the alpine 9845rb have a clock display?



yes it does see below

  • CD receiver with built-in amplifier (16 watts RMS/45 peak x 4 channels)
  • detachable face with Quick Search button
  • plays audio CDs, CD-Rs, and CD-RWs including discs burned with MP3 and WMA files
  • Bass Engine (bass center frequency, width, and level, plus treble center frequency and level adjustments)
  • BBE sound processing
  • two sets of preamp outputs
  • rear-panel minijack auxiliary input
  • clock
  • CEA-2006 compliant
  • CD frequency response 5-20,000 Hz
  • CD signal-to-noise ratio 105 dB
  • FM sensitivity 9.3 dBf
  • warranty: 1 year

Jun 02, 2011 | Car Audio & Video

1 Answer

Bought a car with the pioneer deh-p4300 in it and don't know how to set the clock,did not receive the paper work


I've had two Pioneer CD players and they both were set the same way. Turn it off then press and hold the AUDIO button if it has one. Then keep pressing it until it gets to the clock. I think on mine the hour starts flashing. When your done just turn it back on. == Answer == I had this problem too. In the far right corner is the "A" (Audio) button. Turn the stereo off and hold the "A" button until the clock comes on. The hour will be blinking. Use the up and down "Select" keys to set that. Then use the right "Select" key to switch to the minutes. Use the up and down keys to set the minutes. Push the "A" button when you're done.

May 17, 2011 | Car Audio & Video

1 Answer

How to set the Clock on a Pioneer DEH- P2300MP


From Pioneer suport site... for most older Pioneer single CD players, you can set the clock using the following steps:
  1. Press and hold the SOURCE button until the unit shuts off.
  2. Press and hold SOURCE again until the clock appears.
    *With some models you will press and hold the FUNCTION or AUDIO button instead of the SOURCE button.
  3. Press the left or right arrow to select the segment of time you wish to adjust.
  4. Press the up or down arrows to increase or decrease the numbers in the blinking segment.
  5. Once the clock is set correctly, press the SOURCE button to exit.

Also, check in this link the User Guide: DEH P2300

If you continue to have problems, contact our Product Support at 1-800-421-1404.

Hope helps.

Mar 28, 2011 | Car Audio & Video

1 Answer

I would like to know how to set the clock for a Pioneer car radio. Pioneer DEH-1600 cd Player mosfet 50w


Here's a link to the manual at Pioneer's web site.

Here's how you set the time (from page 16 in the manual):

1: press SOURCE and hold until the unit turns off.
2: Press AUDIO repeatedly until the clock appears in the display
3: Press (left arrow) or (right arrow) to select the segment of the clock display you wish to set (hours, minutes)
4: Press (up arrow) or (down arrow) to set the clock.

- To cancel clock settings, press BAND
- to save clock settings press AUDIO until the display stops blinking


If this helps, please hit the "thumbs up" for me!

Jun 10, 2010 | Car Audio & Video

1 Answer

How to set the clock on pioneer deh-p59001b radio


On my pioneer I have to have the key on with the receiver turned off. Push and hold the function button for about 3-5 seconds and the clock display should come on with the hours flashing. push the up-down buttons to set hours. Push the right button and the minutes flash, set the minutes with the up-down buttons and then push the source button (or power) to turn on your receiver and your done. Remember you have to have the key on and receiver off to set the time. I think I had to consult my manual 3 times. Pioneer seems to be the only one that won't let you set the clock with the power on.



Mar 30, 2010 | Car Audio & Video

1 Answer

I need to know how to set the clock on my car stereo , it is a JVC KD-G420 CD/MP3/WMA Receiver w / front AUX-Input.


press the S(select) button until you see CLOCK H. use the << >> button to adjust the hour press S again.
Repeat the steps above until you see CLOCK M use the << >> button to adjust the minute. press S to exit.

Sep 10, 2008 | JVC Car Audio & Video

1 Answer

Have Pioneer DEH 1900MP CD receiver. Do not know how to set time. Have no amnual. Also information on the remote control


It's on page 12 of the manual. Here you go:
http://www.pioneerelectronics.com/pio/pe/images/portal/cit_11221/372010482DEH1900MPOperationManual1030.pdf

Adjusting initial settings
Using the initial settings, you can customize
various system settings to achieve optimal performance
from this unit.
1 Press SOURCE and hold until the unit
turns off.
2 Press SOURCE and hold until function
name appears in the display.
3 Press FUNCTION to select one of the initial
settings.
Press FUNCTION repeatedly to switch between
the following settings:
Clock—AUX (auxiliary input)
Use the following instructions to operate each
particular setting.
# To cancel initial settings, press BAND.
# You can also cancel initial settings by holding
down SOURCE until the unit turns off.
Setting the clock
Use these instructions to set the clock.
1 Press FUNCTION to select clock.
2 Press c or d to select the segment of
the clock display you wish to set.
Pressing c or d will select one segment of the
clock display:
Hour—Minute
3 Press a or b to set the clock.
Turning the clock display on or off
You can turn the clock display on or off.
! Even when the sources are off, the clock
display appears on the display.
% Press CLOCK to turn the clock display
on or off.
Each press of CLOCK turns the clock display
on or off.
Operating this unit
12 En

Aug 05, 2008 | Car Audio & Video

1 Answer

I HAVE A PIONEER CAR CD RECEIVER DEH-P400 SERIES AND I NEED TO KNOW HOW TO SET THE CLOCK.


  1. Press and hold the SOURCE button until the unit shuts off.
  2. Press and hold SOURCE again until the clock appears. With some models you will press and hold the FUNCTION or AUDIO button instead of the SOURCE button.
  3. Press the left or right arrow to select the segment of time you wish to adjust.
  4. Press the up or down arrows to increase or decrease the numbers in the blinking segment.
  5. Once the clock is set correctly, press the SOURCE button to exit.
Back to Listing

Jul 07, 2008 | Car Audio & Video

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Car Audio & Video Experts

The Knight
The Knight

Level 3 Expert

69654 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

yadayada
yadayada

Level 3 Expert

63291 Answers

Are you a Pioneer Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...