I have motherboard intel grand county 2 d102ggc2, and my question are i can set on it procecor dual core Or core 2 do, if yes please let me how. my procesesor now it's intel pentuim 4 3000 mhz thanks

http://www.intel.com/support/motherboards/desktop/d102ggc2/sb/CS-026580.htm


CPU SUPPORT-LIST

Most of the dual core system's motherboards do support core 2 duo proc. if you have motherboard model no. post it here and i ll let u know.

Yes sir.

The eMachines T5082 Desktop PC uses an Intel D102GGC2 motherboard,

http://www.newegg.com/Product/Product.aspx?Item=N82E16813121031

The motherboard chipset is an ATI Radeon Express 200,

http://en.wikipedia.org/wiki/Comparison_of_ATI_Chipsets#Comparison_of_Northbridges_2

Scroll down the chart under the - Model - heading.
ATI Radeon Xpress 200 for Intel.

Processors Supported;
Intel Pentium 4, Intel Core2

If the motherboard chipset will support an Intel Core 2 Duo CPU, it will support an Intel Pentium D.

Plus you can always go to Intel Support, and look, lol!

http://www.intel.com/support/motherboards/desktop/d102ggc2/sb/CS-026580.htm

http://en.wikipedia.org/wiki/List_of_Intel_Pentium_D_microprocessors#.22Presler.22_.2865_nm.29

So what are we talkin' about?
A Intel Pentium D, model 925 or model 930?

Up To a maximum frequency rate ('Speed'), of 3.0GigaHertz
L2 cache of 2 x 2MegaByte (2MB)
800MegaHertz Front Side Bus. (800MHz FSB)

FOLLOW Anti-Static Procedures.
THOROUGHLY clean the top of the Processor, and bottom of the Heatsink.
Properly apply fresh, new Thermal Paste.

http://www.hardwaresecrets.com/article/274

For additional questions please post in a Comment.

Regards,
joecoolvette

You already have the right answer dear user, your USB device cannot read by your system it maybe damaged. Try to replace another USB device. Also, maybe your startup in your CMOS/BIOS setup is set in First boot to USB device. Change it to first boot to HDD.

Your motherboard has the follwing memory support : DDR2 533/400 SDRAM 2 slots, Single-channel (2GB2 Max). As long as it is supported by your motherboard there would be no problem since your processor is also supported by the motherboard.

Please refer to the follwoing links from Intel:

1. http://www.intel.com/support/motherboards/desktop/d102ggc2/sb/cs-026580.htm
2. http://downloadmirror.intel.com/15112/eng/D102GGC2_TechProdSpec.pdf
3.http://cip-origin.intel.com/cd/channel/reseller/apac/eng/products/desktop/bdb/d102ggc2/feature/index.htm

Here is the link to your drivers
http://downloadcenter.intel.com/SearchResult.aspx?lang=eng

Intel D102GGC2 Motherboard Each memory slot can hold DDR2 PC2-5300 with a maximum of 1GB per slot.*
Maximum Memory Capacity: 2048MB
* Currently Installed Memory: 512mb Number of Banks: 2
* Dual Channel Support: Yes
* CPU Manufacturer: GenuineIntel
* Although the memory can be installed one module at a time, the best performance comes from using matched pairs of modules.
Your MotherBoard Supports up to 2GB of memory.

You have 512mb, you can add 512mb to the empty slot.
, however,It's a good idea to keep them the same if you can.
You can install memory that is: DDR2 PC2-5300 (PC2-5300 is 667Mhz) you can use 1gb memory in each module for best performance and matching pairs since your motherborad supports dual channel.you can use sound card and SATA hard disk for higher disk support

Intel D102GGC2 Motherboard
i am having 1GB Ram in Single slot,when I add another 1GB ram in the other slot the memory shows only 896Mb.The processer is dual core.

Hi - follow the link below and just select your operating system. You'll find what you need. If this solves your problem PLEASE rate this as fixed. If you need more help just add a comment and I'll be happy to assist you further. Thanks.

http://www.intel.com/design/motherbd/gc2/gc2_drive.htm

Jeff

thanks sir for your help i got my audio iam help full to you