Question about Gateway GT4022 PC Desktop

1 Answer

Gateway GT 4022

I do tech support for our small church and our Pastor's GT 4022 "died" on June 30th or there abouts. His symptoms sound very similar to yours. Brief reboots with flashes of video and then NOTHING!

Would love to repair CPU but most importantly need to recover data from hard drive. Seems the only way will be to get PC repaired or find another working GT4022 to put hard drive in. His user folder is "access denied" due to log-in with username and password to XP Media Edition.

If you have developed a solution, then PLEASE share!

Posted by on

1 Answer

You can try this http://support.microsoft.com/kb/810881,http://www.asklaptopfreak.com/laptop-notebook-help/2008/01/12/access-denied-because-documents-password-protected/.You have to be in safe mode to do this.

Posted on Aug 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Joe covette


I understand, and I appreciate your looking deep into both CPU's.

Are we talking about,
1) Intel Core2 Duo E6550, which has a maximum frequency rate, ('Speed'), of 2.33GigaHertz?
http://en.wikipedia.org/wiki/List_of_intel_core_2_microprocessors#.22Conroe.22_.2865_nm.2C_1333_MT.2Fs.29

4MegaByte of L2 Cache, 1333MegaHertz Front Side Bus?
(4MB L2 cache / 1333MHz FSB)
Based on the Conroe Core technology, and the 65nanometer architecture? 0.85Volts to 1.50Volts - voltage range?

2) Intel Core2 Quad Q9550, which has a maximum frequency rate of 2.83GHz?

http://en.wikipedia.org/wiki/List_of_intel_core_2_microprocessors#.22Yorkfield-6M.22_.2845_nm.29

2 times 3MB of L2 Cache, 1333MegaHertz FSB, Voltage range - 0.85 Volts to 1.3625 Volts?
Based on the Yorkfield-6M Core technology, and the 45NanoMeter architecture?

Don't know.

I just look at what motherboard chipset is used, then if it will support both a Dual Core, and a Quad Core; I look at the voltage range, and core technology/architecture.

http://www.fixya.com/support/p929676-gateway_gt5692_desktop_computer

So we are talking about a Gateway GT5692?

http://support.gateway.com/s/PC/R/1015553R/1015553Rnv.shtml

Components > Motherboards > 4006272R - Foxconn (Bengal) RS780 Motherboard > Specifications,

http://support.gateway.com/s/MOTHERBD/Shared/4006272R/4006272Rsp2.shtml

Ha! So we are NOT talking an Intel CPU! (Processor)
Apparently not discussing a Gateway GT5692 Desktop PC, either.

What desktop computer are we talking about Virgil, and what is the motherboard chipset?

Regards,
joecoolvette

Apr 21, 2013 | Gateway PC Desktops

1 Answer

I cant get sound on my emachine c6415.


Driver: Small piece of software that allows the Operating System to communicate with a device

The device is the audio chipset, and WinXP is the O/S.

All you should have to do is download AND install the audio driver.

eMachines Support > eMachines C6415 Desktop PC > Main Support page,

http://support.gateway.com/us/en/emac/product/default.aspx?tab=1&modelId=1351

Automatically opens to the Drivers tab.

Click on the blue - Audio Driver. The first file listed.
A small window will come up -
Opening Audio_Realtek_5.10.00.5750_XPx86_A.zip

Make SURE the small circle to the left of Save File, has a Green dot in it.
IF not; click in the small circle to the left of Save File.
Now go below in the small window, and click on OK.

A small download window will come up.
Allow the file to fully download, then DOUBLE-click right on it.
If Microsoft 'squawk boxes' come up, ignore them, and click on OK, and Run.

In the next small window go to the far left, and click on -
Extract all files.

At the bottom of the next 3 small windows, click on Next, Next, and Finish.

If you are not prompted to restart your computer, do so.

You may have also lost the Volume icon, down in the taskbar.
(System tray. Down where the time is)

Click on;
Start > Control Panel > Sounds, Speech and Audio Devices > Sounds and Audio Devices

In the Sounds and Audio Devices Properties window, go to the middle where it states -> Device volume <- in blue.

Click on the small square to the left of -
Place volume icon in the taskbar

No go below to the Right, and click on Apply.
Then go below to the Left, and click on OK.

For additional questions please post in a Comment

Regards,
joecoolvette

Mar 07, 2013 | PC Desktops

1 Answer

I had to do a system recovery on my GX7018E and now the ethernet driver is gone and I can't hookup to the internet. I have tried to download the driver on my laptop then put it on a memory stick...


Gateway Support > Gateway GX7018e desktop computer > Drivers download page,

http://support.gateway.com/us/en/product/default.aspx?tab=1&modelId=2748

Scroll down to the heading Lan
Left-click on - Marvell Yukon 88E8050 PCI-E A SF Gigabit Ethernet Controller Drive

In the small window that comes up, (Opening Lan_Marvell_8.27.4.3_XPx86XPx64_A.zip),
make sure the Save File circle has a green dot in it.
If not left-click in the empty circle to the left of Save File.
Now click on OK below.

Another small window will come up.
Write down the heading. This tells you where the file will be saved to.
(File name is Lan_Marvel_8.27.4.3_XPx86XPx64_A.zip, with a yellow zip folder icon)

In the heading may be Desktop, or My Documents, or Downloads.
(Desktop, Documents, Downloads for Vista, and Win7)

1) Desktop: It will be on your desktop screen. (Yellow Zip folder with the file name)

2) My Documents: Start > My Documents (Or windows logo button > Documents)

3) Downloads: Start > My Documents > Double-click on Downloads
(Or windows logo button > Documents > Double-click on Downloads)

When you see the file name Double-click right on it.

In the small window left-click on Unzip
In the next window left-click on Extract All Files, on the left side.

Now follow the Installation Wizard instructions.
(Essentially just left-click on Next, Next, and Finish at the bottom. Windows will put the file in the proper place)

If you are not asked to restart your computer, do so.

For additional questions please post in a Comment.

Regards,
joecoolvette

Aug 06, 2011 | Gateway GX7018E PC Desktop

2 Answers

When i turn on my pc only the motherbroad green light comes on nothing else no fan are anything what could be the problem


1. You possibly will need to replace the power supply.
Hard to determine here with out physically seeing the PC but I 'm 90% sure it is the power supply not supplying proper voltage to the system board and hard drive. You will need a tech to check the voltage at the mother board inputs. You should have -12,+12,-5,+5 at key socket points

Aug 10, 2010 | Gateway 500 S PC Desktop

2 Answers

Could this be motherboard


Hello

This sounds like the USB ports on your system board have failed, one thing that you can do is go into the control panel

Start > control panel > System >> Hardware tab at the top> Device Manager button

See if you have any items with a disabled (red no icon) icon beside them, if not or you so no usb ports in here at all the board is probley failed.

May 26, 2009 | Gateway GT4016 Desktop PC

1 Answer

Programs shut down at random


Have you checked in your case to see if all your fans are working? May be a heat problem in power supply, CPU. Get this software and install to check the actual temps on your motherboard.

This is the free program I use.
http://download.cnet.com/Motherboard-Monitor/3000-2086_4-10518386.html

Here is also a website that talks about overheating problems and solutions
http://hubpages.com/hub/How-to-check-CPU-temperature

Apr 26, 2009 | Gateway GT4022 PC Desktop

2 Answers

Can u possibly tell me where i might be able to download a schematic for an EMachine desktop computer model #T2742? It is out of warranty and was donated to our church and we need to know where to...


Hi dallasblue08,

Here's a diagram of what your looking for:

The following eMachine models share the same motherboard (and thus the same front panel layout):
T2742 T2796 T2798 T2824 T2885 D2823 T2862 T2896 T2898 T2958

284ecac.png

Hope this helps!

Mark

Jan 04, 2009 | PC Desktops

1 Answer

I need a restore disk for gateway computer


From Gateway website:

Q: What if my Gateway System Recovery CD/DVD is lost, missing or damaged? A:
  • For computers shipped after November 1, 2004 and until January 2005, a patch needs to be installed. Download the patch through our FTP site at ftp://esupport:vImvF88@ftp.gateway.com/pub/hardware_support/drivers/apps/medialess/Create_DRV_APPS_CD_Update.exe. After the installation of this patch, the option to create the drivers and applications CD is available from the Start menu under Programs. However the operating system (OS) CD\DVD must be requested by e-mailing customer service.
    Note: Replacement of the operating system CD may be at a cost according to your warranty status.

  • For computers shipped between January 2005 and June 2005, the option to Create my Drivers-Applications CD(s) is already available under Programs. The operating system CD\DVD must be requested by e-mailing customer service, and may be at a cost according to your warranty status.
  • For computers shipped after June 2005, an operating system CD\DVD is included and the option to Create my Drivers-Applications CD(s) is in System Recovery. Access the program from the Start menu under Programs. This backup process through System Recovery allows you to create the applications and drivers CD\DVD as many times as needed. If the operating system CD\DVD is lost, missing, or damaged, e-mail customer service to inquire about a replacement. Please note that replacement may be at a cost according to your warranty status. If all CD\DVD's are needed, e-mail customer service to inquire about a replacement. Please note that replacement may be at a cost according to your warranty status.
Send them an email with model number from tag at the back of the computer and ask for recovery CD.

Sep 04, 2008 | Gateway PC Desktops

1 Answer

2002 gateway profile shutdown problem


You need to uninstall the graphic drivers for the card and install new ones from the makers site.

This can be done in device manager by right clicking in the display adapter and then uninstall. Then reboot and install the new up to date ones. Sounds like the ones you have in now are damaged or corrupt.

Doesnt explain the slowdown though sorry :(

Dec 29, 2007 | Gateway Profile 3 PC Desktop

Not finding what you are looking for?
Gateway GT4022 PC Desktop Logo

Related Topics:

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gateway PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you a Gateway PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...