Question about Televison & Video

1 Answer

My girlfriend took the batteries out of the Phillips universal remote. When she replaced them with new ones, the remote would not respond to the Toshiba TheaterView big screen television it was programmed to interact with. Unfortunately, we do not have a operators manual for the remote or the television.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

First push code buttom then press tv then start pushing power buttom until tv go off (do not push power again after tv go off if this happen need to do everything again)then press enter and try again

Posted on Jul 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Phillips 42 inch #242254901817 will not respond at


Check the remote control for its infra-red emission. Check it with fresh batteries. If it is found OK, check and replace the infrared sensor inside the TV. If you wish to get some details; check the site linked here. It has details about how to check a remote control; by one among the post. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/
You here reports that even the new remote too does nor responds. Which remote did you bought? An original one or a universal remote? If it is an original one, and even your set do not respond it, the infra-red sensor inside the TV is faulty. Replace it. Contact any service technician. If it is a universal remote control; you have to set it up with the set-up codes said to Philips brand TV [The setup code list will accompany with package of each universal remote control], to work with it.
Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/

Oct 19, 2014 | Televison & Video

1 Answer

I have a new sharp aquos tv LC 60LE633U. Remote is broken but have a universal Phillips remote anyone know the code ? Help please


Hello
Three digit universal remote codes for Sharp tV are:
004/ 009/ 079/ 095/ 111/ 112/ 114/ 122/ 123/ 124/ 173
Four digit codes are:
0079 0123 0063 0020 0004 0009 0226 0266 0006 0095 0122
Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

Feb 28, 2012 | Sharp Televison & Video

2 Answers

Can't find manual for Phillips Universal remote. Need codes for LG TV


what is the your phillips remote model number? Model number is located under the batteries. then go to www.p4c.philips.com to get the codes...hope this helps

Jan 06, 2012 | Philips Magnavox Learning Universal Remote

1 Answer

My original remote with this model stopped working several months ago.I bought a phillips universal remote and that worked fine for several months and that stopped working.I bought a new Phillips...


The first possibility is that the new remote control is a dud out of the box. It can happen. Another possibility is that the remote sensor in the TV has failed. Then the remote is transmitting, but it's not being picked up by the TV. (The lights are on but there's nobody home.) If you can, return the new remote to the store and exchange it. Then, if the set still doesn't respond, you'll need to replace the remote sensor.

Jan 02, 2011 | Sylvania 4819LT 19" TV

1 Answer

My phillips universal remote needed new batteries, so i put new ones in, but now it won't work. can you help me?


When the batteries died the remote forgot all the stored codes. All you have to do is to input them again.

Jun 19, 2010 | Televison & Video

1 Answer

NEED SONY CODES FOR PHILLIPS REMOTE


Universal Remote Control Simple Setup

* Point it at a TV set and press the Mute/Power button. (Mute button if TV is already on, or Power button if the TV hasnt already been turned on)

* Keep pointing it at the TV until the TV turns on or muted, most TVs respond in about 5 seconds, the most is up to 20 seconds. (Other universal television remote you find in stores take minutes to program and enter long confusing codes)

* Once the TV is muted or turns on, simply let go of button and you have total control. You can use the remote as if you had the original remote, and responds instantly. ENJOY YOUR FREEDOM of choices with our remote!
Most remote controls require minutes of programming a universal remote code into each television while you read the confusing instruction manual.

Jan 02, 2010 | Philips Magnavox Learning Universal Remote

1 Answer

Sanyo and tv remote problems


http://www.remotecentral.com/cgi-bin/files/rcfiles.cgi?area=other&db=devices&br=philips
If you know the model of your Phillips remote, you should be able to fihd it here, download the file, then unzip user guide. Hope this helps.

Aug 18, 2009 | Philips Magnavox Learning Universal Remote

1 Answer

Remote Control not working


you can easy check if you existing remote really work just look on the IR led with a digital cam and u will be able to see the led flashing

Feb 05, 2008 | Toshiba MD20F51 20 in. TV/DVD Combo

1 Answer

Durabrand tv replacement remote


I SUGGEST TO CHECK IF THE REMOTE IS RIGHT FOR THE TV
TO RETURN WHERE YOU BUY IT FOR CONTROL OR CHANGE WITH ANOTHER ONE

Dec 07, 2007 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73073 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

71162 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...