Hello Pls show me how to install driver for Xerox 203A Pls give the link if possible

Hello you can download the driver here:

http://www.fujixeroxprinters.com.au/en/support/Downloads.aspx?product=5452&category=5726&os=2&dl=1

Please unzip the file before you install.

Just connect the printer with the usb cable and set the power on when you install the software.

Good luck

You must first install the correct drivers for this printer. You can download them here: http://www.fujixeroxprinters.com.au/en/support/Downloads.aspx?product=5411&category=5726&os=33554432&dl=1
Once you download, open the file and follow on-screen instructions. You should be all set to begin using your printer!

install this driver http://www.support.xerox.com/support/phaser-3121/downloads/enus.html?operatingSystem=winxp&fileLanguage=en

Firstly See Drivers You Have Is compatible With Your Window Then.Connect Usb Cable Printer To Computer Then Power On The Printer Then Computer Appear a Message In Right Side Down On Screen If The Message Appear Printer is commnicate with Computer properly Open The Folder Where the drivers is. Intall driver Manually

You can download the printer driver from the Fuji WEB site, click on this link :-
http://www.fujixeroxprinters.com.au/en/support/Downloads.aspx?product=5411&category=5726

i have solved the problem...check it out on my blog post and like my blog on facebook if u think it is useful..thx^^ http://rainbowstar94.blogspot.com/2011/02/install-fujixerox-printer-driverwmv.html

take out the drum unit and clean it, normally when the drum unit is dirty with toner, it will give you error.

http://members.driverguide.com/driver/detail.php?driverid=966718 try this

pls replace the sensor in the printer and also chk after replacing a new toner

where i can download docuprint 203A software free for vista