Question about Sharp Projection Televisions

1 Answer

TV will not turn on model aquos LC-46X20 Went away for a long weekend, did not turn power off left TV on stand by. Came back and power LED on front of TV is flashing and will not show any form of piture or static just black. It seems like it is in some kind of sleep mode but nothing has been set. Hope you can help Martin

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 167 Answers

Hello. here is something you can try , unplug the set and let it set. for about 10 mins. then plug it back and try tpo turn it on. hope this help's you. let me know "GOOD LUCK"

Posted on Jul 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a Sharp flat panel model LC-20SH4U. The units power LED light is red. No effect (sound or picture) when remote or on/off switch is activated. The LED light slightly blinks.


Resetting the TV
If the buttons on the remote AND the buttons on the TV case do not work (channels do not change and you cannot open or navigate the menu), the TV has stopped responding. Reset the TV as follows:

NOTE:
Some TVs have a reset button. If available and accessible, try using the reset buttons before using the steps below. Using the reset buttons can save time.

clip_image001.jpg
1. Unplug the TV power cord from the power outlet.
2. Unplug any connected devices (DVD, Set-top boxes, etc...)
3. Press and hold the TV power button for five seconds.
4. Plug the TV power cord back into the power outlet and turn on the TV.
5. Open the on-screen menu to confirm that the TV is responding again.
6. Turn off the TV and reconnect the devices.
7. Turn on the TV.

Hope this may help;

Regards,
VOTIT

Aug 09, 2008 | Projection Televisions

3 Answers

Sharp Aquos LC-30hv4u


this looks like a power problem sir.

do you use a surge protector?

Jul 14, 2008 | Projection Televisions

1 Answer

It started 3 days ago the picture started getting darker and darker everyday then last night after turning the tv off which was off for several hours I turned it back on and a few min later there was a...


REPLACE THE LAMP IT IS LOCATED IN THE BACK OF THE TV THERE ARE INSTRUCTIONS IN THE OWNERS MANUAL FOR REPLACEMENT IT IS CONSIDERED CUSTOMER REPLACEABLE ITEM.
PART NUMBER 915B403001 Lamp (180W)

Dec 16, 2010 | Mitsubishi WD-65736 Television

1 Answer

Green light continues to blink. TV does not power up for Mitsubihi model WS 55513 TV


Howdy,
Try these ;
1. LED does not stop blinking after plug in. Verify the standby supplies, 12-volts at connector KA pin 17, 6-volts at KA pin 18 and the 28-volts at KA pin 19, if the supplies are present suspect the DM PCB part # 934C067001.

2. LED does not stop blinking after plug in. Check C9B01, C9B02, C9B10, and C9B11 (1000 UFD 16) on the DM PCB, if they are bad replace them with part # 181P734030 (680 UFD 16 V).

The board is on the left hand side of TV from the back. It is standing up, in a silver box.

Good Luck, BIG IRISH.

Jan 04, 2010 | Mitsubishi WS-55513 55" Rear Projection...

1 Answer

MY SAMSUNG HLR5067WAXXAA PROJECTION TV JUST


replace the lamp only takes few min make sure you get right one for model of tv the LAMP MODEL number will be on OLD LAMP the tv will work and sound will come back hope this helps

Oct 22, 2009 | Samsung HLR5067WX 50" Rear Projection HDTV

1 Answer

TV won't work after storm


ok lets try this hit the power button on the DVD player some go into stand by mode and when power is interrupted you have to push the button manually also reset the surge protector next get a lamp that you know works and unplug the tv and plug the lamp into the socket where the TV was plugged into turn on the lamp, does it turn on? yes then something wrong with TV again may have been in stand by mode plug back in and try pushing the power switch on make sure the TV if it has a remote is on the right im put to get a picture say like a satellite or cable or DVD player. hope this helps.

May 29, 2009 | Mitsubishi WS-55859 55" Rear Projection...

1 Answer

APEX Model # GT2015DV. Stopped turning on. Went away for the weekend, and when I came back the TV wouldn't turn on anymore. I tried different outlets but no luck. Any ideas as to what could be wrong or...


OK it may only be a fuse... he said hopefully :) .. these sets have a switched mode power supply... it has a Mains fuse... check this... otherwise I would bet that the SMPSU has failed.. a common cause.. if ya a dab hand at this sorta thing then get a new PSU and swap 'em out.. otherwise find a reputable serviceman obtain a "Quote" and proceede from there.

Remember IF ya choose to work on this set yourself be carefull and use an Isolation Transformer at all times. GL

Jul 29, 2008 | Projection Televisions

2 Answers

SHARP AQUOS LC-26P70E - Clock


Most TV's don't change with daylight savings time, since they do not operate with a date, just time. You will need to change it via the remote.
Good luck

Mar 30, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Jason Harris
Jason Harris

Level 2 Expert

256 Answers

Are you a Sharp Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...