Question about Televison & Video

Open Question

Can anybody give me the codes for remote to control Philips 42PFL7662D/05 TV and Panasonic Theatre system SC-PT460 or N2QAYB000207 and Thomson DT16300 digital TV recorder with Freeview please? Have got a Nikkai RM-96 that seems very hard to set up, even from the manual codes listed, or automatic code capture or even in learn mode.

Posted by on

5 Suggested Answers

  • 1 Answer

SOURCE: Nikkai A75HQ Digital Freeview Receiver

I'm using an attenuator 3db/5-1000Mhz - I get all channels. Without I got 100% strength,0% quality. hope it helps

Posted on Jan 11, 2009

  • 1 Answer

SOURCE: setting humax foxsat hdr remote to control panasonic tx32lxd60 tv

Had the same problem with my panasonic - it would appear that none of the codes will actually turn the TV off because they need a longer signal to turn off. I eventually found that code 0650 works for mine - input the code as instructed in the manual and then selected OK - holding down the standby button on the humax controller then turns the TV off. Try all the codes and see which gives most control functions. Hope this helps.

Posted on Feb 14, 2009

MNfisherman
  • 11896 Answers

SOURCE: need universal code for philips sru3004 universal remote

here are some sites with your code.

www.remote-codes.com
www.tvcodes.com
www.universal-remote.net/philipsmagnavox.html

Posted on Apr 15, 2009

  • 1 Answer

SOURCE: Code for Sony RM-V310A remote.

How do I program sony universal remote RM-V310A for a polaroid flat screen TV

Posted on Sep 09, 2009

  • 74 Answers

SOURCE: I need Philips CL035A codes list for toshiba tv

I believe this is your remote. it's listed as pm435s
http://www.p4c.philips.com/files/u/us2-pm435s/us2-pm435s_dfu_eng.pdf
these are the codes for toshiba 0517, 0419, 0512, 0613, 0719, 0112, 0506, 0111, 0618, 0627, 0437, 0041, 0094, 0802, 0111, 0313, 0715

Posted on Sep 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

Codes


Here are some sites that will have your codes and instructions on how to enter them:

  1. Universal TV Remote Control codes Universal remote control codes for all TV and VCR brands including: at&t, beery systems, bondwell, curtis mathis, dish network, ge, gemini, ...
    www.tvcodes.com/ - 23k - Cached - Similar pages -
  2. Universal Remote Control Codes Universal Remote Control Codes for DVD, VCR, TV and Home Theaters System.
    www.remote-codes.com/ - 7k - Cached - Similar pages -
  3. Philips Magnavox Universal Remote Code Philips Magnavox Universal Remote Code - Instructions on how to program your Philips Magnavox universal remote control.
    www.universal-remote.net/philipsmagnavox.html - 35k - Cached - Similar pages -

Apr 17, 2009 | Televison & Video

1 Answer

I have the code numbers to the Universal Remote but need


Don't you just hold the code search button until the red light stays lit, then type the code in? Do you have the code for the philips universal remote clo35a for a panasonic tv/vcr?

Dec 30, 2008 | Panasonic PT-47WX53 47" Rear Projection...

1 Answer

Hi We have just bought a Panasonic Theatre Surround System SC-PCT560 and can only get it to work when a DVD is playing. We cannot get it to work with Sky or normal TV. Any ideas? Thanks, Julia


Hi,
You can have TV sound from your home theater system.
Download User Manual of SCPCT560 from Panasonic Support and go to page-7 for hook up procedure of TV sound out from home theater.
Thank you.

Nov 30, 2008 | Panasonic Televison & Video

1 Answer

I have a Sole Control SC-545 and would like to know how to program so will work with my Zenith TV


CURTIS Universal Remote Control setup
  1. Turn ON your TV.
  2. Press FUNC button.
  3. Press TV button.
  4. Enter 2-digit code No. (either 01 or 05)
  5. Press TV button.
  6. Press POWER button to confirm.
Search Mode Method
  1. Turn ON your TV.
  2. Press FUNC button.
  3. Press TV button.
  4. Repeatedly press POWER button until TV go's OFF.
  5. Press TV button to confim.
Red LED will blink 3 times if wrong input is detected.

Jun 26, 2008 | Televison & Video

9 Answers

Philips universal remote codes


For the majority of phillips/magnavox universal remotes: Hold code search button down till red light satys on. Press the tv button and the red light should blink and stay lit. With the tv on, push the power button repeatedly until the tv turns off.(dont push the power button again after the tv turns off or it will go to the next code). Push the mute button to save the setting.

Feb 07, 2008 | Panasonic PT-47WX53 47" Rear Projection...

1 Answer

Hdmi receiver to hd plasma tv


1) I believe the "3 prong" you mean the RCA A/V cable. This cable is color coded red/white/Yellow (Right Audio/Left Audio/Video). This cable is OK for regular TV but when it come to HD, the quality of the picture fall short.

But you also could mean the 3 wires component cable that color coded Green/Blue/Red. If you plug only this without the Red/White for the speaker then you will only see the picture. This component cable help make the pic a lot clearer. But I believe not as good as DVI and HDMI. More info here http://en.wikipedia.org/wiki/List_of_display_interfaces

2) Most universal remote control come with a preset of keys to emulate other remotes. You need to search for the owner manual to figure out how and what code to put to use with a certain device.
Most new Universal remotes has a learning mode too that the user can "teach" the remote to emulate that "IR signal".
Now for the "HOW". It's a little complicated. But here is my 2cents. Most basic remotes has a light in front and this light is Infra Red light. So you don't see the light but it blinks. The blinking is the data of 1 and 0 that computer uses. Most of the time the remote is in sleep mode which uses very little power. One press of the button, it switch on the remote and carry out the performance of that button. The brain of the remote figure out which button was pressed and search in it's memory for the blinking pattern and blinks the light with that pattern and then fall back to sleep.
For the pattern itself, it contain informations. It usually start with the ID of the device that suppose to receive the signal. Follow is the "flag" and then the information of the button that was pressed. Then the final signal is basically say "End" to indicate that the message end. All device within range will get this information but if the ID don't belong to it, it will ignore the entire message.


Hope what I said helped. :D

Nov 01, 2007 | Panasonic PT-53TW53 53" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

469 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69736 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6370 Answers

yadayada
yadayada

Level 3 Expert

63661 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...