Question about DVD/Blu-ray Drives

1 Answer

Cd rom drive can't be recognize. registry fault

Am using windows xp home.i can't use my cd/dvd drive coz of somekind of registry code 19

Posted by on

  • Anonymous Dec 30, 2008

    Code 19 with Hitachi GD 5000 Internal DVD drive that was 'left off' for a few months. trying the registry fix, the simple delete and reinstall does NOT work.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

To resolve this problem, remove the affected filter drivers. To do this, follow these steps:
1. Click Start, type regedit in the Start Search box, and then click regedit in the Programs list.
If you are prompted for an administrator password or confirmation, type your password, or click Continue.
2. Locate, and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Caution There can be many instances of the registry subkey that is mentioned in step 2. You must make sure that you are in the appropriate registry subkey before modifying the UpperFilters and the LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the Default data value is DVD/CD-ROM and the Class data value is CDROM.
3. In the right pane, right-click UpperFilters, and then click Delete.
4. Click Yes to confirm the removal of the UpperFilters registry entry.
5. In the right pane, right-click LowerFilters, and then click Delete.
6. Click Yes to confirm the removal of the LowerFilters registry entry.
7. Exit Registry Editor, and then restart the computer.

Posted on Sep 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code 19


Click start control panel administration tools computer management device manager scroll down cd-dvd rom drives you might see a yellow question /exclamation mark ? ! or a red X right click to update driver

you might have to physically unplug the leads for this cd/dvd restart your computer then plug them back this should activate the found new hardware wizard

if this does not fix the problem it might be a registry problem if you cant see your disk drive in windows explorer


Close all open programs

Click on Start, Run, and type regedit and press Enter
Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak

If any of the above keys shown in step 4 are listed, right-click on them and choose Delete

After deleting the keys, close the registry editor
Reboot your computer

Open My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone.


hope this helps

Jun 18, 2012 | Dell DVD-rom DVD Drive

1 Answer

My compaq presario f768wm isnt recognizing my cd/dvd rom. my camera quit working and also it says it can't find my audio output device.


Hi,
For that problem, Try first replace that internal DVD-rom drive other good internal DVD-rom drive. if not Also Detected or recognize.
Try this second solution. insert external USB type DVD-ROM. if not recognize also, Your operating system Have internal software device data corrupted. You need to reinstall operating System like windows xp, windows 7 (OS) etc.. to fix data Corrupted of operating system device for hardware software.
Please see sample external DVD-rom USB type.

jimmyverdade_79.jpg

Just let me know if not yet working your Compaq Presario 700 series DVD-rom Drive.
Thanks for using Fixya.



Aug 19, 2011 | Compaq Presario 700 Series DVD-Rom Drive...

1 Answer

Both of my dvd drive shows "This device cannot start.(code 10)" in device manager. i'm using windows 7 32bit thanks


make sure that the cd rom is getting enough consistent power test all leads that are attached to the cd rom including electical extensions and make sure they have a secure connection or just replace them there might be bad/faulty or
your drivers may have been corrupted or you might have a virus run your antivrus program
you might have to physically unplug the leads for this cd rom then plug them back in this will activate found new hardware wizard
hope this helps or
you might have to uninstall then reinstall your cd rom or uninstall the driver then reinstall for this device
also
control panel admistrive tools,computer management,device manager scroll down cd dvd rom drives right click you can you can update driver,roll back driver,or select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall
only do the registry check if you cant see the drive/s in windows explorer/my computer
or it might be a registry problem
Close all open programs

Click on Start, Run, and type regedit and press Enter
Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak

If any of the above keys shown in step 4 are listed, right-click on them and choose Delete

After deleting the keys, close the registry editor
Reboot your computer

Open My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone.

hope this helps

May 14, 2011 | ASUS DVD E818A4 Disk drive DVDROM 18x IDE...

1 Answer

My cd-rom drive isnt working.. this message is displayed in device manager.. Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged....


control panel admistrive tools,computer management,device manager scroll down cd dvd rom drives you might see a yellow question mark ? right click you can you can update driver,roll back driver,or select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall if this does not fix the problem it might be a registry problem if you cant see your disk drive in windows explorer
Close all open programs

Click on Start, Run, and type regedit and press Enter
Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak

If any of the above keys shown in step 4 are listed, right-click on them and choose Delete

After deleting the keys, close the registry editor
Reboot your computer

Open My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone.



hope this helps

Dec 05, 2010 | Gateway (5500652) (  5500652)...

1 Answer

My Dell laptop has a dvd drive that doesn't record


try this one:

if you are using windows XP

- click start
- click run, in the run type in regedit
you will see a registry editor window
in the registry editor window
- click the + sign at the hkey_local_machine
- click the + sign of system
- click the + sign of currentcontrolset
- click the + sign of control
- click the + sign of class
there will be bunch of random letters and number under that control

try to find this one

{4D36E965-E325-11CE-BFC1-08002BE10318}

if you click this check if you will be able to see DVD rom at the right side of the registry editor window
you must delete the upper and lower filters
after that restart the computer and try to put in dvds

for vista or win7
- click start and type in the start search regedit
after this just do the same thing with the win xp instructions

----------------

try also to update the DVD codec. you can also try to download the most updated windows media player, power DVD or any software/program that have dvd codecs or that acts like a player for DVD

i hope this works.
Pls rate my resolution thanks!!

Feb 16, 2010 | Dell DVD/Blu-ray Drives

2 Answers

The drive is not registered with my machine after I connect it.


u dont have any specific drivers that came with the Targus dvd?
..mabe the generic driver is not exepted!
..or ur usb port is not configured properly!
...do u have usb 2.0!
...did u tried on other ports!
...try to force usb 1.1!
...last step: in bios, try to putt usb dvd , or usb , (or anything similar), to boot from, (make sure u have a proper disk inside the dvd.)
if it worked (and its not simple, u need to make many tries) , then its driver problem, and in xp pro, every thing can be fixed ;)
gd luck

Dec 30, 2009 | Targus USB 2.0 DVD/CD-ROM SLIM EXTERNA DVD...

1 Answer

Windows cannot start this hardware device because


try to uninstall the cd rom.... then restart your computer

Jun 29, 2009 | Sony DDU1642/C1 Internal DVD Drive

1 Answer

Acer Aspire 1690 DVD/CD-rom is not working


My cd/dvd rom dont work coz the drive has change to another one.I think take windows xp/vista/7/8 with an usb and inslat it. When windows finished installing try to format it because the dvd and cd rom are fixed . Thnx

Jan 16, 2009 | Acer (91.37H37.001) Internal DVD Drive

1 Answer

Problem of CD/DVD


have you tried another model combo drive use cyberlink powerdvd it might be thaty it need atapi drivers installed as this can cause problems in windows 2000 if all fails upgrade to xp home or pro as these are designed for dvd drives also have you upgraded to service pack 4 for win2k this may fix your problem

Dec 09, 2006 | Panasonic (SR-8174-BW) (SR8174BW) DVD...

Not finding what you are looking for?
DVD/Blu-ray Drives Logo

Related Topics:

682 people viewed this question

Ask a Question

Usually answered in minutes!

Top DVD/Blu-ray Drives Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

isaac johny
isaac johny

Level 3 Expert

796 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Are you a DVD/Blu-ray Drive Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...