Question about Emerson EM-CKT9087 Corded Phone

Open Question

Wharfedale answer phone flashing "CL"

How to i stop my answer phone flashing cl? have read the manual but it's no help?

Posted by on

6 Suggested Answers

SOURCE: I have an Wharfedale IN120

Perfect answer, thanks

Posted on Jul 12, 2008


  • 1 Answer

SOURCE: Wharfedale DECT TAM telephone/answer machine

re set date and time on main hand set

Posted on Aug 28, 2008

  • 1 Answer

SOURCE: Wharfedale IN120 CL flashing

On the phone go into the menu and select date and time. Set the date in american format so MM/DD, ie. 9th of may would be 05/09.

Posted on May 09, 2009

bahratt
  • 561 Answers

SOURCE: My ge cordless phone is flashing cl on the

Your time needs set on your answering machine. If you have buttons on the top of your base, press and hold the day/check button to set the day of the week. Press and hold the hour button to set the hour. Press and hold the min. button to set the min. If you don't have buttons on base, press flash button on handset to enter answerer remote mode. Press the 8 key to enter time set menu. Set hour and min using number buttons and set am/pm using caller id buttons. Press # pause to confirm the setting.

Posted on Jan 14, 2010

bahratt
  • 561 Answers

SOURCE: Flashing cl

Your time needs set on your answering machine. If you have buttons on the top of your base, press and hold the day/check button to set the day of the week. Press and hold the hour button to set the hour. Press and hold the min button to set the min. If you don't have buttons on base, press flash button on handset to enter answerer remote mode. Press the 8 key to enter time set menu. Set hour and min using number buttons and set am/pm using caller id buttons. Press # pause to confirm the setting.

Posted on Jan 14, 2010

bahratt
  • 561 Answers

SOURCE: cl and 0 flashing

Your time needs set on your answering machine. If you have buttons on the top of your base, press and hold the day/check button to set the day of the week. Press and hold the hour button to set the hour. Press and hold the min button to set the min. If you don't have buttons on base, press flash button on handset to enter answerer remote mode. Press the 8 key to enter time set menu. Set hour and min using number buttons and set am/pm using caller id buttons. Press # pause to confirm the setting.

Posted on Jan 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Wharfedale IN120 CL flashing


On the phone go into the menu and select date and time. Set the date in american format so MM/DD, ie. 9th of may would be 05/09.

Oct 21, 2008 | Emerson EM-CKT9087 Corded Phone

1 Answer

Wharfedale IN120 beeping


did you ever get it sorted, i just brought the phone and have the same problem!!!!!

Sep 27, 2008 | Phones

2 Answers

Answering machine is flashing CL after I lost power


set the CLock by holding down the buttons on the side of the answering machine - top button for day, middle button for hour, bottom button for minute

Sep 25, 2008 | GE 25932 Cordless Phone

2 Answers

Wharfedale DECT TAM telephone/answer machine is flashing CL on the main answer machine base unit. This message is not indicated in the user manual can you please advise? Many Thanks Steven Clifford


This is due to the base unit losing power and needs the clock resetting.
The handsets retain their clocks under battery power so this is a little misleading.

To reset the base unit clock:
- press the OK key
- press the 'down' arrow twice until "DATE/TIME" is displayed.
- press the OK key again, this will display the year. Enter the correct year on the handset numeric keypad and then press OK. (Only the last two digits of the year need to be entered).
- The date is then displayed in MM/YY format, enter the correct date on the handset numeric keypad and then press OK.
- The time is then displayed, enter rhe correct time on the handset numeric keypad and press OK.
- The handset then beeps and displays "SAVED".
- Press the "C" button and replace the handset on the base unit.

The base unit should now stop flashing "CL".

Aug 28, 2008 | Emerson EM-CKT9087 Corded Phone

2 Answers

CL flashing - setting time and date


you dont--your phone company does that when the caller id is active

Jul 18, 2008 | GE 25942GE2 Cordless Phone System

9 Answers

I have an Wharfedale IN120 Touch Dectr Phone with Answer Machine, on the answer machine display screen CL is flashing, I don't know why or how to clear it.


I have just posted this to answer someone else but will do it for you in case it comes up elsewhere.You need to key in the time and date again on the handset, because even though it already says the time and date on the handset its because the battery has saved the data but the base needs it re installing to date and time the messages. I unplugged mine to move it and thats when it started flashing it took me ages to work out that CL was the clock. Hope this helps I'm sure it will.

Jun 21, 2008 | Phones

2 Answers

GE 25942EE-C model date time stamp


I cant program my phone.The CL light flashes and I cant do anything.

May 20, 2008 | GE 25942GE2 Cordless Phone System

Not finding what you are looking for?
Emerson EM-CKT9087 Corded Phone Logo

Related Topics:

438 people viewed this question

Ask a Question

Usually answered in minutes!

Top Emerson Phones Experts

kakima

Level 3 Expert

96608 Answers

Cindy Wells

Level 3 Expert

4758 Answers

David Burbee
David Burbee

Level 2 Expert

1868 Answers

Are you an Emerson Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...