Question about Panasonic Televison & Video

1 Answer

My Panasonic DMR-EX77EB has problem with background on replay changing from normal colour to garish green, and there's no evident way of correcting problem. Any thoughts? Al Webb/Croughton, England NN13 5LU

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I traced the apparent problem to a SCART cable between the DVD recorder and the TV set. I disconnected it, wiped down the points and reconnected it. The problem appears to have vanished straightway, and nearly 24 hours later the system is still working normally. It could be that others have had similar SCART problems and you may find my experience useful. Anyway, thanks for being there even if not needed, and I'll keep you in mind futurely if there are other problems.

Al Webb/Croughton, England

Posted on Jul 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Panasonic pt 52lcx66 flashes green turns on and then turns off after 2 min


Need to look at the menu on colur
It will indicate lining up of certain colours
Use the directional arrows to centre the colours

May 12, 2014 | Panasonic PT-52LCX66 Projection Television

1 Answer

Too Much Green


Please check out this link for manufacturer information:

http://www.infocus.com/support/Products/Projectors/LP240.aspx

Jan 10, 2008 | Televison & Video

1 Answer

My picture has broken into colour ghosting (it looks like a 3d picture without the glasses on). I'm guessing that this might be the failure of one of the colour bulbs. The wavey colour bands that I see are...


Please do us a favor and rate this solution after reading.

Projection TV sets have two very common problems. One is convergence ( 3D/Warped video) the other is CRT fluid ( Dull Video). Here are more details and solutions for both. Repair kits with instructions are also avail from www.TvRepairKits.com

Common Problem #1) Convergence has gone out

Projection TV sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the video to look normal. When its out of alignment the video will look 3D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the TV menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired.

This is a very common failure on these projection sets and a fairly simple DIY fix. All projection sets including Samsung, RCA, Sony, Philip Magnavox, Panasonic, Pioneer, Akai, GE, JVC, Toshiba, and others at some point will have the same problem.

Common Symptoms include....


  • Screen looks 3D
  • Colors don't line up
  • One or more colors can't be adjusted when using the convergence menu.
  • Screen is bowed or warped.
  • TV shuts off after powering on. Power light will blink. TV may also make a chirping noise.
Here are some pics of convergence problems.


7859b01.jpg

e87380c.jpg
69189a5.pngSOLUTION #1

For more more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Common Problem #2) CRT Fluid is Cloudy

Projection TV tubes have a liquid coolant that is used to keep them from overheating. After many years the coolant in the blue and green tubes will become cloudy and cause the screen to look dull, red/orange, etc. You may even see halos around images.

Picture of a set that needs the fluid changed.

578ba6c.jpg
TV set after fluid change

65af323.jpg

69189a5.pngSOLUTION

You can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Please do us a favor and rate this solution after reading

Jan 31, 2011 | Hitachi 57F500 57" Rear Projection...

1 Answer

Picture is OK, but colors are off and there is a blue star background that shows on dark colors.


Hello, With most rear projections there is usually an alignment to do with the set up with your TV. This is so the red, blue and green projectors align together to give the correct colouring. This sounds to me what may be causing the outlining of the blue. This can also make it seem off colour. Look in the set up menu of the tv and see if you can find this alignment feature. Usually a cross will appear and you move a blue, red, and green cross with the arrows on your remote to align over the original white one. If this does not work, it may also mean that one of your projectors, that is the red, blue or green one may be failing causing the off colouring. Hopefully this alignment may fix it for you.

Oct 26, 2009 | Sony Grand WEGA KDF-60XBR950 60" Rear...

1 Answer

My sony grand wega gives a blue shade on the black background which is the problem


HI, Check the menu set up of the TV. There should be an alignment feature that aligns the blue, red, and green colour projectors. If the blue is out of alignment that is likely why you can see it on the dark backgrounds. The set up normally puts a white cross on the screen and you select each of these colours and then move the cross over the white on with the arrows on your remote. Once all are aligned correctly you shouldn't be able to distinguish between different colours and hopefully this should get rid of your blue shade.

Oct 25, 2009 | Sony Grand WEGA KDF-42WE655 42" Rear...

1 Answer

Problem with a colour display on Hisense tv


If your picures are all purple it means that the green colour is missing. TV colour is made up by mixing Red, Green & Blue. Removing Green leaving Red & Blue makes purple. Study the green colour circuit for a fault and confirm that the green gun inside the tube is working.

Aug 31, 2009 | Hitachi 60SBX78B 60" Rear Projection...

1 Answer

Blue & green star like spots on Panasonic rear projection LCD TV


The EEPROM needs to be reprogrammed. You should contact Panasonic customer care as they may fix this at no charge to you.

Jul 07, 2009 | Panasonic PT-50LC13 50" Rear Projection...

1 Answer

Panasonic TV


sounds like the green crt is shorting or the green CRT PCB is defective. Let me know if you need more assistance with the issue

Jun 06, 2008 | Panasonic PT-47WX49 47" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

The Knight
The Knight

Level 3 Expert

69845 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...