Help in connecting two computer together for multy gaming

The USB cable is probably strictly a charging cable, not a sync cable or a dual charging/sync cable, so it will only charge the player but not make it visible to/accessible by your computer. You can get a sync cable or if you already have a multi-port USB hub that you use to connect devices to your computer (mouse, flash drive(s), etc.), try connecting the player through an available port on the hub.

It's not clear what exactly you mean. Generally, you don't connect two computers together using a USB cord. You can use a "cross-over ethernet cable" to connect the network jack of one computer to another computer. This allows transferring files and/or sharing an internet connection. If you have a wireless router you can enable Windows "File and Printer Sharing" on each computer and transfer files that way. Please provide more details of what you're trying to accomplish by connecting the computers together with a USB cable, and we may be able to give you a more specific answer.

if you go to your cmd prompt and type in ipconfig /all and see what your ip address is...if it starts with 169 type ipconfig /release then press enter then type ipconfig /renew and check your ip address again...it should start with 192

Hi,
Set your Maximum Idle TIme to 0 and save the setting.

Thanks for using FixYa.

There are a couple of ways you can network two computers together.
Each computer must have a network card installed together with the LAN card drivers. The two computers needs to be connected to a network hub and these computers need to be set up on the same workgroup name.
Using a network hub will allow more the two computers to be connected to a network and the number of computers that can be installed on this network depends upon the number of available ports on the network hub.
You can use a Crossover LAN cable to connect the two computers together and you won't need a network hub.

To information and how to setup a home network, please click on this link -
Home Network Guide, routers, print servers etc.
http://sites.google.com/site/networkguidedemo/home

The problem could be that something inside got damaged when you dropped it. If its still under Apple's limmited warranty you can send it in and they will replace it.

Hope this helps!

ok, i think what you mean is this.  Crossover cable is for connecting 2 computers together without the need for a router.  also called pc-to-pc.  Straight cables need the use of a router or hub to connect 2 computers together.  Hope this helps, if not let me know more info.

If the game uses serial codes to install or use the game, you need to have purchased 2 copies. Then you can either connect them with your (i'm assuming is a lan) cable. OR Download hamachi (you should use version 1.0.1.5) and create a network. Hamachi is a program that creates a virtual lan cable. You can download it here: http://www.filehippo.com/download_hamachi/2114/

check your cable router and see if you have internet on your own computer first if not make share all the plugs are placed in correctly if so and there is still a problem unplug your cable/DSL moltenfor 10 seconds and plug it back in there is also another way check the name of your router and Google search the name to get the contact # for customer support and they should be able to help you out fersure


^_^

try going to your local radioshack and asking for a cable to do it. Tell them it needs to be "double male" infering that the piece sticks into another part instead of bieng stuck into. Then tell them one end needs to be "RCA cables" (the red white and yellow ones) and the other end needs to be a computer moniter cable. There are several types of moniter cables you can use, look in the back of your moniter to see what you have. There should be writing that says any 1 of the following "s video in", "dv in" "video in" etc. ask the radioshack man to get the non RCA side of the cable to have one of these on it. If you need to, it helps to take a picture of the back of the moniter where all the input plugs are, and show it to the radio shack man, he can probably help decide which cable to use. Once you buy the cable, plug the red yellow and white side into the red yellow and white holes respectively on the PS2, and the moniter cable into the moniter. Turn on the moniter and the PS2 and... Voila. PS You may need to take out the cable connecting the moniter to the PC to put in the new radioshck cable. I hope this works for you-BCA