I'm not sure what happened. I received this for Christmas this year brand-new, and about a week ago it simply stopped working. I thought the belt might have come off, but it had not. It just stopped spinning, so i think it's a mechanical issue. I took the metal plate off, and nothing seemed out of place to me.

If it is not a brand new belt start by installing one. Belts lose elasticity and should be replaced at least once per year.

Make certain it is not locked. Then contact Shure for repairs.

It is caused by the turntable not turning steadily. More than likely it is mechanical probably caused by defective belt drive. If the change in pitch is in regular interval then more than likely it is mechanical. It can be caused electrically when current or voltage fluctuates casuing the turntable to go faster or slower. Fixing this problem requires opening the unit. Check the belt it may be loose or stretched or may a debris is stucked on it.

I would have suggested opening up your old mouse and cleaning the right click button first.

Generally, wireless devices have a connect button that finds the frequencies of the devices. On the receiver press this button, then press the button on the bottom of your new mouse. the receivers lights will stop flashing once connected.

Something amazing just happened! On my monitor screen, window popped up that said, "ASK A QUESTION - LET OUR EXPERTS SOLVE YOUR PROBLEM FOR FREE".

I couldn't resist getting expert advice for free, so I clicked on the window. I was immediately taken to a magical world where I can pay for expert advice. I opted not to pay for expert advice. The next day, I was asked if the help I received was helpful. So here I am posting this response. I haven't received any expert advice yet, but when I do....!

New belts tend to stretch after a week or two.Simply retighten the belt now that it has settled in & it will be fine.Was it the alternator belt?That is the most common one to sqeal after replacement.Hope this helps you.

I had the same issue a few years back but with actual symptoms of malfunctioning. I had mine fixed under warranty. The service tech told me it was a faulty circuit board. Works perfect now. I think the warranty is only for the first year to cover labor and parts. Not sure how much it would be out-of-pocket. This happened within 3 months of a brand new purchase. Hope this answered your question.

Durabrand is kind of a house -brand for Walmart.
I would take it all back and explain the trouble . They'll most likely give you a new one.

That happened to my mom's phone too
we both have LG scoops/rumors and that are simply ridiuculous and peices of ****.
I'm not even kidding when I say I've been through at least 7 scoops in the past year.

What you can do is take it to an alltel store and they can replace it for you, but I would REALLY recommend getting a new phone.
Unfortunately, I'm stuck with my alltel contract to have an LG scoop for another year and it's horrible. My current phone that I just got about 2 weeks ago already stopped working. Get out while you can.

Replace both the main control board and the wax motor. This sounds like a computer chip malfunction

As far as the squeak, make sure it is not the bearing located at the back of the tub under the large pulley.