Help hello i was wondering if you could tell me where i can find instructions for putting a little boys car set track together. it's called speed legends

hi Joyce.
is this a electric train set or a battery set?
could you please give me more info on this please.
can you please tell me what train set this is.
or go to this link might help you out on how to put a train set together.
how to put train track together Google Search

Hello, Maureen.

According to the instructions, you set the date and time together. I'm wondering if neither work for you or if only one works.

As you are aware set the date and time;

Press the MENU button then # 1 0 1
Select the month, day and year. For today: 110711
Select the OK button

Enter the current hour and minute: 0730 (for 7:30)
For 7:30 PM, select the PM button
Select the SAVE button and then the OFF button

Hope this helps.

the tracks with letters are misty island put c and d together for corners (swap other side) then rickty bridge inbetween on one side and switch track on other. For numbers pretty much you can go by number (start with 1 and go left) I had to fidget a little but it worked

Not sure what instructions you need, but the setup is very simple.
1. Put your track together
2. Attach the track power connector by slipping it under the track and pushing, then lift up the other side. This will make the two metal contacts connect to the track.
3. Plug the connector from the power pack into the track module (It should only go one way)
4. Plug the control box (looks like a telephone cord) into the track module, Will only go one way
5. Place the locomotive on the track.
6. Place the Treetop Tender on the track (you need both to make it run)
7. Connect the large connector from the treetop tender to the loco
8. Turn on the command module and press forward ...

You should now be running in circles ...

Hope this helps...

mcdevito75 here, Use the contact info in the istruction manual you have, and speak with Disney.

Action Canyon Directions: http://www.thomastrackmaster.com/pdf/Action%20Canyon.pdf

Hi A5 blades are not made to be unscrewed. They are snap on blades. You can call 800-830-3678 which is Oster Direct consumer service. They will walk you though the process or you can send them back to Oster and they will put them back together and realign them for you. Hope that helps.

surely you jest old toy assembly directions .

Sounds like the Thomas Adventure Set - see picture below

you hooked the wires up wrong the whole fuel injector wire assembly goes up to the fire wall then clips into main wires
the fuel injector track is one track with wires
when you replace wires you also want to replace the injectors to match
buy new engine wire harness this will solve the problem