I belong to a local church and they have a TELEX WWT-55 unit which is missing the Belt clip. Any suggestions as to where I can find one. Area is West of Boston Ma. Natick or Framingham. Appreciate any advice. Jim Gorman [email protected]

Hello, Elias -

Are you asking about how to go about requesting that a local TV station broadcast your church's religious services?

I have no idea where you reside, so I cannot identify any local TV stations in your area. You will have to identify TV stations (locally headquartered stations) in your area and contact the stations' director of programming to discuss your idea and what it might cost the church to air weekly broadcasts of its religious services..

You may find the information here interesting:
https://tappla.com/blog/how-to-live-stream-your-church-services-and-events-to-tv-screens/

By the way, Fixya.com is a website intended for asking and answering questions on how to go about REPAIRING THINGS.

I chose to answer your question as a kindness.

Best wishes.

Tape wrapping on a capstan shaft is commonly due to a sticky pinch roller or capstan shaft but is also because the take-up reel table does not provide enough torque or tension to gather up the tape. The Teac MTT160 cassette is a test tool we use to determine what the deck is doing torque wise. Telex probably has something similar. I worked with a guy who worked at Telex in the tape business- He did not talk about them much but he did say they had a lot of belts in them. Maybe you are just dealing with a belt that needs to be replaced. Lubrication also tends to be needed at every rotation point as well. That would include reel tables. I hope this gives you some help as Telex repairmen are getting to be like Hens teeth.

I realize that this question was asked in December of 2011, but I just now found this question on this website today.

Here's a picture that I took of the Telex HT-100 wireless microphone transmitter that I have showing the wiring on the circuit board.

The green wire gets soldered to the lead of the 10 Megohm resistor that you can see in the picture.

Here you go. I would use something like this. This has a 1.75" (44mm) diameter. http://www.bhphotovideo.com/c/product/298898-REG/WindTech_MC_4_MC4_Extra_Large_Heavy_Duty_Microphone.html
You can also go here http://www.crossroadsaudio.com/Rentals%20Catalog.pdf scroll down to page 5 and you can use this - $15.00 Telex ELM-22S Black Lapel Mic, Shure TA4F w/ Mic Clip -- That clip is the same diameter as your mic and is made by Telex.

Contact Bosch/EV (formerly Telex) via website or call them. They're in Burnsville Minnesota and their customer service is excellent.

Hi,

The good reception has nothing to do with your audiolevel.
You have to adjust the gain on your Belt Pack or on your receiver.

Regards,
Gerard

The switch is between the Mic element and the output connector.
Depending on the type of microphone will determin how the switch is wired.

http://geeksquad.fixya.com/ThreadView.aspx?prdid=83009&thid=695737
Changing the belt
Posted by cbgolba on Jun 22, 2008
My husband changed the belt on our vacuum, now the metal frame doesn't fit back on the bottom. Also, there is a small metal clip that we don't know where it belongs.

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. You should check on the owner’s manual to see how it goes together or call the Simplicity customer service line listed below to see what goes where. It’s been awhile since I have worked on a simplicity vacuum. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
http://simplicityvacuums.com/ Customer Service 1-888-9-Simply
Thanks, Don the Vac Man
Go Ahead. Use Us.

how old is the set?

Try this site, 15th item down. http://www.bhphotovideo.com/bnh/controller/home?A=search&ci=9724&Q=&O=NavBar