Question about Hitachi Projection Televisions

2 Answers

Hi I think my Hitachi C29-F500DR TV has a fault. At first I thought someone had inadvertantly set the timer but the power indicator is not blinking 10 seconds on, 1 second off. It is blinking 3 shorts , 1 long.Any ideas. Pete

Posted by on

  • stage3 Jul 27, 2008

    This is a CRT TV not a projection type!

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 813 Answers

I think your power capacitor has been damaged so u should change it if have no idea how to change u shroud go to a professional tv repaired

Posted on Jul 27, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,035 Answers

Blinking lights indicated any component failure in the TV .

You can also try a hard reset: Unplug TV from AC mains and remove all cables from TV. Wait about 30 minutes and replug to AC power and redo the cabling. Switch on the TV and see if it works..
If its within warranty Please give to the company.....
OR
If you would like to attempt a DIY, you will need a service manual to guide you. You can find one here:
http://servicemanuals.vstore.ca/


Good luck..


Posted on Jul 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Hitachi 53uwx10ba power light flashes and tv won't turn on


It is rare in this set but it indicates a short somewhere that is pulling voltage inside the set down---not a do it yourself repair unless you are a Technician with some basic equipment and a schematic diagram.

Have someone look at it from a repair shop or ?

Apr 14, 2012 | Hitachi Projection Televisions

2 Answers

LOST COLOUR: C29 F500DR The colour seems to have disappeared on my Wow by srs C29 F500 DR. I have a digital set top box attached. I cannot seem to restore colour. Any adjustment of the picture via remote...


I suspect that you have connected via componet I would check the red green and blue cables

you may have lost a one of the colors but check the cables first

is it b/w on it's menus?

if it is you have a color element out

Sep 22, 2008 | Hitachi Projection Televisions

2 Answers

Hitachi 51F520 keeps turning off and on


hi, the tv is not set on sleep timer is it. the other fault could be a dry joint or a swollen capacitor a loose board with the power off you will need to do a visual check make sure you've got a good light hope it helps

regards
shaun

Dec 06, 2011 | Hitachi 51F510 51" Rear Projection...

2 Answers

Replaced main bulb in front but lamp button on front of tv is still blinking and tv won't show picture


The lamp timer on the Hitachi projector must be reset whenever the lamp has been replaced. The "Lamp" indicator on the display will light red or the "Change the Lamp" message will display when the lamp timer needs to be reset. Hitachi recommends that the lamp timer never be reset without replacing the lamp and to always reset the timer when the lamp is replaced. The message functions of the projector will not function properly if the lamp timer is not correctly reset.

  • Turn the power on. Press the "Reset" button for three seconds until the "Lamp xxxx hr" message appears on the lamp timer on the bottom of the screen.

  • 2

    Press the "Menu" button on the remote control while the lamp timer is displayed.

  • 3

    Press the left arrow button. Select "0" and wait until the timer display clears.


  • If this was helpful a vote on the thumbs up for the free advoce would be greatly appreciated. Thanks

    Apr 04, 2011 | Hitachi 60V500 60" Rear Projection...

    1 Answer

    My tv has a yellow, green or blue tint to it. We think it needs a new picture tube. Do you think that is the problem and if so is it easy to do myself


    Hi,

    You have Light Engine Failure. Only fix is replace the Engine. Here is a Page that shows Hitachi LCD Projection TV Optical Engine Faults.

    Check for these faults before spending money on a failed bulb. Here is page with all Hitachi TV Lamps and Bulbs.

    Feb 11, 2011 | Hitachi UltraVision CineForm 55VG825 55"...

    1 Answer

    Hitachi 50V715 power on/off problem


    I would check to see if any of the fans stop turning or don't turn when set turns on. They do have sensors monitoring them and the set will shut down if they are not turning. I believe there are three fans around the chassis.
    Hope this helps,
    Skyassoc

    Oct 23, 2009 | Hitachi 50V715 50" Rear Projection...

    1 Answer

    Hi-Def?


    Yes, it is HD TV ready but you must have a set top box from your cable or dish company that provides a Hi Def signal. The inputs must also be connected with the YRB cable. Only certain channels on my box are HD. The screen is so large that HD isn't nearly as impressive as some of the smaller models but it is still HD. I also have the 53FDX10B.

    Mar 03, 2009 | Hitachi 53FDX01B 53" Rear Projection...

    1 Answer

    Hitachi 43GX10B power issue


    Remove back of TV, plugin AC cord & observe which LED's light / stay lit / go out ..
    base your continuing research on what you see...................T.

    Oct 30, 2008 | Projection Televisions

    1 Answer

    Hitachi 61UWX10B 61 in | TV will not turn on


    If your set all of a sudden won't come on, e.g., the screen is blank, but the LED on the under the screen next to the on/off switch keeps flashing, then there may be an internal fault on the set that needs to be reset.
    To force the reset, try this:
    • Unplug the set and wait a few seconds
    • Replug and see if the video returns
    Whenever the set senses an internal fault through its monitoring circuitry, it essentially shuts down the set. The flashing LED provides the indication that a fault has been detected. Removing power to the set resets the monitoring circuitry. When plugged back in, the circuitry again does a check of the system1.gif. If it finds that there truly is a problem, then the set is shut down and the LED will again flash.

    Jan 30, 2008 | Hitachi 61UWX10B 61" Rear Projection...

    3 Answers

    Hitachi 55VG825 rear proj television blinking light and screen doesn't light up


    Refer to owners manual ! Blinking indicates the type of fault that is occuring on all your tv sets. example : power light on red - indicator light beside it green but blinks rapidly for half a second rapidly then shuts off. This refers to a faulty lamp or a lamp that is near its expiration. Read your manuals if indicators refer to easy repair sweet, but if it says call tech then bummer...

    Dec 06, 2007 | Hitachi UltraVision CineForm 55VG825 55"...

    Not finding what you are looking for?
    Projection Televisions Logo

    Related Topics:

    58 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Hitachi Projection Televisions Experts

    Jaime Hernandez

    Level 3 Expert

    2267 Answers

    matt martin
    matt martin

    Level 3 Expert

    1191 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17129 Answers

    Are you a Hitachi Projection Television Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...