No vioce kx-t7730 - Panasonic KX-T7730 Corded Phone

Programming a Panasonic KX-T7730 phone to share the same line with a cordless phone using a splitter requires specific steps to ensure proper operation. Keep in mind that splitting a phone line may affect the overall call quality and performance, so it's important to follow the instructions carefully. Here's a general guide to help you set it up:

1. Obtain the Necessary Equipment:
   • Panasonic KX-T7730 phone
   • Cordless phone (compatible with the line splitter)
   • Telephone line splitter (designed to split the line to multiple devices)
2. Connect the Splitter:
   • Plug one end of the telephone line from the wall jack into the "Line" or "Input" port on the splitter.
   • Plug the other end of the splitter into the "Line" or "Input" port on the KX-T7730 phone.
   • Plug the cordless phone's base unit into the "Phone" or "Output" port on the splitter.
3. Configure the KX-T7730:
   • Lift the handset of the KX-T7730 phone.
   • Press the "Program" button, followed by the desired extension number (e.g., "101") or the "Intercom" button.
4. Select the Line:
   • Press the "0" or "CO" button on the KX-T7730 phone's keypad to select an available outside line (usually labeled as "CO" lines).
5. Make a Test Call:
   • Place a test call from the cordless phone to ensure that both devices are functioning as expected. Verify that you can make and receive calls from both phones.
6. Adjust Settings (if needed):
   • Depending on your specific requirements and the features of your phone system, you may need to adjust settings such as ringing patterns, call forwarding, and call waiting. Refer to the user manual for your KX-T7730 phone for instructions on adjusting these settings.
7. Testing and Troubleshooting:
   • Test the setup thoroughly by making and receiving calls from both the KX-T7730 phone and the cordless phone.
   • If you encounter any issues with call quality, dropped calls, or interference, consider consulting a professional technician or your phone service provider for assistance.

It depends what telephone system the KX-T7730 is connected to. You should have a Panasonic box that says 'KX-TA624', 'KX-TEA308, 'KX-TES824' or similar somewhere.
Depending which Telephone System you have, it may just need programming or it may need an additional card (circuit board) installing. Panasonic KX TEA TES Telephone Systems Tiny Telecom

http://service.us.panasonic.com/OPERMANPDF/KXT7720.PDF

or

http://www.ehow.co.uk/how_7159736_program-panasonic-kx-t7730.html

Here is the User Manual for the Panasonic KX-T7730:

KX-T7730 Manual

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Yes. However, it will only work if you have the 8-port hybrid card(TDA0170) installed. Besides costing a lot more money(the card, not the phone) the phone uses 4x the power of a 76xx or DT series phone and you only get 12 lousy working buttons.

Carl

since panasonic kx-t7730 does not have a delete option
we can however replace the number to a another number or a dummy number as per the model
KX-TA624 ....PRESS 2 *
KX-TA1232...PRESS 3 0
.... TYPE DESIRED NUMBER(eg: 0000)
AND HANDUP

This would replace the existing number
tell me if this works

I need the User Manual for Panasonic Model KX-TSC11MXB Made in Malaysia in english - Kindly assist.

Downnload the operator manual:
http://www2.panasonic.com/webapp/wcs/stores/servlet/PNAEndecaSearchCmd?N=779832046&Ne=&No=0&Nr=12001&Ns=&Ntk=SupportSearch&URL=

my telephone is lock forget pasword

in the left side of phone is a ringer setting key, put it in big bell symbol