Question about RCA D52W20 52" Rear Projection HDTV-Ready Television

1 Answer

No tv picture or sound

Green power button cycles 3x then 1 minute wait
when problem started after about 8x tv would come on and work fine. even if I turned it off and right back on. I unplugged the tv for the entire day and still nothing. I took the back off and checked for blown caps visually nothing.
I see others posting about checking the boards are they
talking about the boards on the sliding tray that has the source (rca jack inputs) board or the boards way up front
under the projection tubes I guess?

Posted by on

  • solamar Jul 26, 2008

    no picture no sound

  • teedee222 Jul 27, 2008

    RCA D52W20 /ITC222 CHAS. power lite flashes 3 times --no power /no picture// is the the board with the flyback on it bad ?



    took the power line out to check for high voltage

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • RCA Master
  • 8,617 Answers

3 flashes is the code for a bad flyback. You can get a new one at the following link with free online tech support with instant messageing to help you install it. you need flyback number 259296. here is the link.
http://servicemanuals.vstore.ca/

Posted on Jul 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

Picture one day, no picture the next


try resting the device again for few hours n then try

Aug 19, 2008 | Mitsubishi VS-60601 60" Rear Projection...

1 Answer

My Sony KDS-60A2000 is 41/2 years old. About 2 weeks ago I could not get the tv to power up. the green stand by light just kept blinking. I powered off, then powered up again and the tv started and and...


Hi,
TV needs lamp replacement as existing lamp got weak or has been reached to end of its working life, please note that lamp is not dead or broken so that is why lamp lit is not lit at tv front.
Hope these info will help you.
Thanks.

Nov 03, 2010 | Sony KDS-60A2000 60" HDTV

1 Answer

Tv shutdown


check your lamp door interlock switch.

Jul 31, 2010 | Mitsubishi WD-65733 65" HDTV

1 Answer

I've been having this problem for a while. when I'd turn the tv on I was able to watch it for about 15 minutes. suddenly the picture and voice would turn off, but the green power button was still solid...


Sounds like it may be a power supply issue. I don't know what "modules" the tech replaced, but I would have advised you to scrap the TV for a newer model as they can get pretty expensive to find and replace parts of the older rear projections. Sorry I can't be more help to you.

Feb 04, 2010 | Projection Televisions

1 Answer

Tv sound and pic goes out and green light flashes for 38 seconds


I have the same tv and it did the same thing. I replaced my lamp and it corrected the problem.

Jan 25, 2009 | Sony Grand WEGA KDF-60WF655 60" Rear...

1 Answer

Standby/power button blinks with no picture or sound


id take it and have it repaired. people on here can tell you what they think it is but no one knows for sure what is causing the problem. a repair shop can guarantee the repair.

Jan 25, 2009 | Sony Grand WEGA KDF-60WF655 60" Rear...

1 Answer

TV does not recieve a remote


Hey, Have you tried to power cycle your remote? That may work, do the TV too. I'll give ya the steps, just follow them and you should be ok. I'll throw in a factory reset as well, but if you're not using a cable box you will have to run another auto scan. anyways start off by unplugging the TV and removing the batteries from the remote control. Let them both sit, you don't have to let the remote sit really, but I do for good measure. You have to let the TV sit for a minimum of 5 minutes. at the end of 5 minutes, you have to find the physical power button on the TV, this means NOT on the remote, but on the TV itself, you have to find this power button, and you have to hold it down for 1 solid minute. Again, any time you can do something extra for good measure, it can't hurt, so if you want to leave it unplugged for 10 minutes and hold the button for 2, go for it, it may help. After you're done with that, power cycle the remote control. Being that your remote seems to be haywire, go ahead and press every single button, this means channel up and down, even if they're on the same button, every one from the top to the bottom, 5 times with no batteries in it. Then hold down the power button on the remote for 30 seconds. Then replace the batteries, preferrably with new ones. This completes the power cycles for both the Remote control and the TV. Now, before plugging the TV back in, we have to do the factory reset. Again, hold the power button on the actual TV, and then, while holding down the power button, plug in the power cord, wait for a couple of seconds, and then release the power button. Wait for a moment, and then turn the TV on. This completes the factory reset.

The reason for all of this, is, power cycle the remote to drain it's capacitors and reset it, power cycle the TV incase the Remote sensor is affected by a static electricity build up. Factory reset incase any settings may have caused this. Hope this helps.

Jan 14, 2009 | Philips 50P8341 50" Rear Projection...

1 Answer

My RCA D52W20 will not stay on


Clicking sound is power relay engaging. If all systems are not functioning properly, unit will shut down to prevent further damage and/or fire hazard

Apr 12, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

4 Answers

TV Picture Goes Black


I had the same exact problem.
I removed the bulb and cleaned it. There is a small screen at the top of the bulb and it was covered with dust. Once it was cleaned I replaced the bulb and it solved the problem.
Thanks to those who posted the solutions

Jul 28, 2007 | Sony Grand WEGA KDF-60WF655 60" Rear...

Not finding what you are looking for?
RCA D52W20 52" Rear Projection HDTV-Ready Television Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

D. E. Hev

Level 3 Expert

1059 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

Are you a RCA Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...