Question about Cuisinart DCC-1200 Coffee Maker

1 Answer

Setting the Time

Just bought a new DCC-1200 Coffee Maker and cannot figure out out to set the digital clock. I've pressed the Hour and Min buttons and nothing happens. Please help. Thanks!

Posted by on

  • 1 more comment 
  • rtjjj Aug 15, 2008

    cannot set clock hr and min buttons don't work



  • Anonymous Mar 15, 2014

    How to set hours ll

  • Anonymous Mar 21, 2014

    Clock won't set

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 5 Answers

First, turn the Function Knob (bottom-left of the Control Panel) to “Clock”.

Hours: Press and hold the “HR” button to go through the numbers quickly. When the number displayed approaches the desired setting, release and press(pulse) the button to advance one digit at a time.

Note: When the number passes 12, the PM light will be displayed on the LCD.

Minutes: Press and hold the “MIN” button to go through the numbers quickly. When the number displayed approaches the desired setting, release and press (pulse) the button to advance one digit at a time.

To finish setting time, turn the Function to any setting other than "Clock", or simply wait until the numbers stop blinking.

Posted on Aug 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you set the minutes on the clock?


There are two ways to set the clock on your coffee maker. 1- When you initially plug in the coffee maker, the unit will beep and "12:00" will flash on the LCD display for a few seconds. Press immediately the h/min button (o) to set the current hour. If "12:00" starts to flash, press the PROG button (n) for a few seconds until the "12:00" flashes again. Then press the h/min button (o) to set the current hour. There are AM and PM indicators on the top right side of the LCD screen. To set the current minutes, press the PROG button (n) and then press the h/min button (o) until the correct minutes appear on the LCD display. After 5 seconds, the unit will beep and the time will stop flashing. 2- At any other time, you can set the clock or change the set time by pressing and holding the h/min button (o). The unit will beep and "12:00" will flash on the LCD display. Use the h/min button (o) to set the current hour. There are AM and PM indicators on the top right side of the LCD screen. To set the current minutes, press the PROG button (n) and then press the h/min button (o) until the correct minutes appear on the LCD display. After 5 seconds, the unit will beep and the time will stop flashing. Notes: Your clock has now been set and will continue to keep the correct time, even after the coffee maker has been shut off. Unplugging the coffee maker or a power failure will reset the clock to 12:00 AM. Repeat the instructions above to reset the clock

Source : Krupsusa.com
Link to manual : http://product-support.groupeseb.co.uk/Download/Pdf/366/km730

Mar 21, 2016 | Krups KM730D Breakfast Set Coffee Maker...

1 Answer

How do you set the time?


To set the Time:

1. Turn the FUNCTION KNOB to "Clock".

a. Hours: Press and hold the "Hour" button

to scroll through numbers quickly. When

number displayed approaches the desired

setting, press and release (pulse) the button

to advance one digit at a time. After

setting the correct hour, the default will be

the last time set unless power is shut off.

Note: When the number count passes 12, the

PM light will be displayed on the LCD.


b. Minutes: Press and hold the "Minute"

button to scroll through numbers quickly.

When number displayed approaches the

desired setting, press and release (pulse)

the button to advance one digit at a time.

After setting the correct minute, the

default will be the last time set unless

power is shut off. To finish setting time,

turn the FUNCTION KNOB to any other

setting or simply wait until the numerals
stop blinking.

Sep 15, 2011 | Cuisinart DCC-1200 Coffee Maker

1 Answer

Coffee maker shuts off too soon after brewing.


Hello FloydBob, The Cuisinart DCC-1200 has the ability to program the auto-off function that keeps your coffee warmer plate on after brewing is complete.

The unit lets you select the time increments from zero up to 4 hours.

See page 6 of the attached manual for the full instructions for reprogramming the coffee maker.

To program the Variable Auto Off:
1. Turn the FUNCTION KNOB to the “Auto Off”
position. Press and hold the “Hour” button
for 2 seconds. The clock display will start
blinking.
2. Program the coffeemaker to shut off from
zero to four hours after brew cycle is
finished by using the “Hour” and “Minute”
push-buttons.

I figured you might also like to have a complete instruction/owners manual so you can have access for any other questions you might have about your coffee maker, in the future.

http://www.cuisinart.com/share/pdf/manuals/dcc-1200.pdf

I hope you find this Very Helpful and best regards!

Nov 09, 2009 | Cuisinart Brew Central DCC-1200W, 12-Cup...

1 Answer

How do I set the time on cuisinart coffee maker model cbc-00? Regular time 12 hour intervals Thank You


Set the function knob to CLOCK
Press and hold the HR button for a few seconds if the clock display time is not flashing
Once display time is flashing:
Press and release the HR button a few times for it to advance - it will say "PM" on the display if it is set for PM
Press and release the MIN button to set the mins

Sep 12, 2009 | Cuisinart DCC-1200 Coffee Maker

1 Answer

Can't change the time


Have you tried turning the left dial to "PROG" instead of "CLOCK"? This is the only way I can change the clock time on mine...Seems like some kind of a design error...Now I'm not sure what the "CLOCK" function does! Very odd...

Jun 18, 2009 | Cuisinart DCC-1200 Coffee Maker

1 Answer

I have a cuisinart coffee maker. I can set the


Unplug the coffeemaker for 20 minutes or longer - not a second less - in order to fully reset it. Then, when you plug it back in, turn the function dial to Clock again. Press and hold the HR button for a few seconds, and then set the hours. It should work now unless it got zapped, as you said.

Good luck!

-Tha Mp3 Doctor

Mar 21, 2009 | Cuisinart Brew Central DCC-1200W, 12-Cup...

1 Answer

Set clock


Turn dial to "Clock"
Press HR button and MIN buttons to change time

Here is a link to the full user's manual - surprisingly, the directions are not in it:
http://www.cuisinart.com/share/man/25_man.pdf

-Tha Mp3 doctor

Mar 08, 2009 | Cuisinart DCC-1200 Coffee Maker

1 Answer

Coffee brews and then immediately shuts off Cuisinart DCC-1200


To program the Variable Auto Off: 1. Turn the FUNCTION KNOB to the ?Auto Off? position. Press and hold the ?Hour? button for 2 seconds. The clock display will start blinking. 2. Program the coffeemaker to shut off from zero to four hours after brew cycle is finished by using the ?Hour? and ?Minute? push-buttons. (see ?To set the time?)

May 20, 2007 | Cuisinart DCC-1200 Coffee Maker

Not finding what you are looking for?
Cuisinart DCC-1200 Coffee Maker Logo

1,256 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cuisinart Coffee Makers & Espresso Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Are you a Cuisinart Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...