Can not get a program to read my navionics sd card I have windows xp

Hi,

Please test the backup sd card on another GPS if possible to see if the zoomed-in section of the map file shows up or not. If it shows, then you'd need to send in your lowrance gps for repair from the water damage.

Thank you.

Your running an elite 7. It's not compatible with navionics platinum.

Please check if the Computer supports SD card of larger capacity.
If preinstalled OS is Windows XP Operating System, supports SD card from 512 MB to 2 GB max and does not support SDHC card.
Windows Vista and Windows 7 Computer supports SD and SDHC card upto 8 GB to 16 GB,.

i have lost my maps on the gold card Australia e&n i have not taken the card out of my lowrance gps sounder lms 339c since new some three & a half years can they be restored i have had no luck trying to contact navionics australia

I had the same problem with my handheld Lowrance Hunt C. After installing the card and locking it in place, I had to slide the card "out" toward the locking mechanism. It barely moves, but worked after that. Whenever I load the card, I now slide it out or wiggle it and it works every time.

I had the same problem with my handheld Lowrance Hunt C. After installing the card and locking it in place, I had to slide the card "out" toward the locking mechanism. It barely moves, but worked after that. Whenever I load the card, I now slide it out and it works every time.

Make sure that the 5200c is set to read the Navionic card. You can set that under Map Data.

I can understand your problem, this problem arises with new SD card.

So, please copy Navione folder to memory card root directory, enter the directory, use Notepad to open Loader.ini to edit, enter your correct path, for example: \ Storage Card \ NaviOne \ NaviOne.exe save you, run to enter Loader.exe navigation procedures.

I'm sure it will work out for you. The error message shows similar indication. So, do it and load your route installed. It will work out surely.

With Regards,
Shyny

Hi!
You NEED to have a gps lock in order for the card to show it's true potential.
Also check in the menu for a setting that says "Map detail" and change it to all available. It could be the setting is on a lesser choice (like the internal mapping and not the new sd card)
Hope this helps!
Mike

Make sure that you go into MAP data and select this chart as the map info. You might just be using the internal base map right now.

Mitch