An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert who has written 50 answers of more than 400 characters.
An expert whose answer got voted for 20 times.
Re: can't print to my Canon
Lett click on the START tab in the lower LH corner of your WINDOWS home screen. Left click on CONTROL PANEL, then left click on PRINTERS. Find the icon of your printer on the PRINTERS page and right click it. On the drop-down menu, make sure PAUSE PRINTING does not have a check mark next to it. Next, lleft click on PROPERTIES. . On the PROPERTIES screen, left click on PRINT TEST PAGE BUTTON. If it does not print, note any errors and try to correct them. You can also delete the driver and try loading a new driver from www.usa.canon.com.Left click on DOWNLOADS. Then, just follow the onscreen instructions for downloading and setting up the new driver, and your printer should then work.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Make sure you are getting blank printouts when printing from the printers control panel, not just your computer. If it's printing blanks from both of these procedures, the focus would be on the "Printhead". Some Printheads are easy to remove, sits under the inks. Should be a grey latch you release to get access to the printhead. (remove inks first). Soak this printhead in a solution of windex, about a quarter inch deep, for about 20 minutes, wipe clean with isopropol alcohol and reinstall in your printer and do another alignment / cleaning procedure. If this does'nt fix the issue, you might try replacing the Printhead or retiring this printer.
You need to download and update the printer software ... Visit the Canon site and navigate to software/product updates ... Download and install and you will have no problems ... Be sure to enter correct product details ...
Sure sounds like you have another printer as the default. Click on start. Then click on control panel. Click on printers and other stuff. See which printer is set as the default. If the Canon Pixma mx340 isn't change it. This should solve your problem.
Thanks for using FixYa and for the great rating. Please consider a testimonial. Thank you.
If you go to Start, Printers and Faxes, if it says "Offline", right-click the printer and choose "Use Printer Online." If it says Ready, you should be good to go.
If however there is a problem yet, double-click the Printer there and see if any jobs are in the print queue. You can remove them all buy Right-Clicking and choosing "Cancel All Documents" then try printing a test page. Right-click the printer, go to properties and click "Print Test Page."
If you still have problems, follow up on your question.
This can be due to a feeder wrong setting on the printer or on your PC: your printer tries to take paper from the back feeder, whereas your paper is on the front feeder....
try to check these settings in your PC and on your printer, and retry to print, hoping this helps
You have Vista this is the problem- there may be a driver issue here take a look at http://www.google.co.uk/url?sa=t&ct=res&cd=3&url=http%3A%2F%2Fwww.opendrivers.com%2Fcategorycompany%2F1405%2F129%2Fmultifunction-canon-free-driver-download.html&ei=DvyBSL7IOZ3uQo-KpLYN&usg=AFQjCNExG7VOz91yswKZfouV8puBHufbKQ&sig2=gL2G5p7ndcDLosNQmPsh4w