Question about Kirby G6 Bagged Upright Vacuum
You need to take the power nozzle off and attach the thing that looks like a little plastic cup with two hooks on it. This is the intake guard. Attach it to the front. Now remove the cloth bag and put the hose on the hole where the bag was. You'll have to line the arrow on the hose up with the notch on the Kirby and push the hose arm toward the Kirby until it pops on. If you need to, lube up the edges of the hole with a wee bit of vaseline or hand lotion. This makes the hose engage easier.
Posted on Aug 28, 2008
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Here is a link to available owners manuals...
Hope this helps,
Posted on Jun 28, 2009
SOURCE: kirby sentria
remove the cloth bag from the bottom it twists counter clockwise, un clip the bag from the top remove the head piece, turn the belt lifter clockwise and release the lever to remove the head, take off the head, in your attachments there should be a screen that covers the impeller that the belt rides on it goes on like the brush head, put your hose onto the bag port by turning clockwise. there it is it will not work without the screen cover. thanks Rene
Posted on Aug 29, 2009
Tips for a great answer:
Oct 12, 2012 | Kirby Vacuums
Jun 11, 2010 | Kirby Ultimate G Bagged Upright Vacuum
Mar 21, 2010 | Kirby Ultimate G Bagged Upright Vacuum
Jan 18, 2010 | Kirby G6 Bagged Upright Vacuum
Aug 29, 2009 | Kirby G6 Bagged Upright Vacuum
Mar 23, 2009 | Kirby Ultimate G Bagged Upright Vacuum
Jan 30, 2009 | Kirby Ultimate G Bagged Upright Vacuum
285 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: