Question about Microsoft Office Professional 2007 Full Version for PC

1 Answer

About additional key

I purchesed pin systm.trassaction is locked.so i want additional.i all ready paid 20000 pina stod 11 6410-07429-01

Posted by on

  • sadathali7 Jul 26, 2008

    i purchesed pinnacl studio 11.i all ready paid 1000 dirhams(u k)mony.i want addition

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Microsoft Master
  • 2,794 Answers

You have to contact Microsoft.com to get a new code. They are the only source to provide you with that information.

Posted on Jul 26, 2008

  • Tim Babcock
    Tim Babcock Jul 26, 2008

    Your thread choice was for Micrsoft Office, not Studio. Thats a different product line and a different company. You need to contact customer support at pinnaclesys.com to take care of that for you. They are very good at correcting the key problems. I've used there software for five years now and never had a problem with them.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wireless enteryhow do you reset the reciever and reprogram the remotes


I suggest check the right procedure in your owners manual, and keep in mind this...

Here is a quick HowTo on programming your own keyless entry:

1) Turn ignition to OFF.
2) Locate the Data Link Connector, its a black 16 pin connecter that is under the driver's side dash, right where your right knee would be. You have to look up into the dash from below to see it.
3) Ground pin 1 of the Data Link Connector by taking a wire or paper clip and running it from pin 1 to pin 4. Pin 4 is ground so you can just short pin 1 to 4 and it will be grounded. Grounding pin 1 tells the system you are ready to reprogram it.
4) Close all of your doors.
5) Turn the key to ACC then back off. The power door locks will lock/unlock. This is the signal that the system is ready for reprogramming.
6) Push a button on your key fob, doesn't matter which button.
7) If you have 2 key fobs, then press a button on the 2nd fob within 1 minute of pressing a button on the 1st fob. Both must be programmed at the same time. If you only have 1 fob then press a button 2 more times to signal that you only have one.
8) The doors will lock/unlock to signal the codes were received.
9) Remove the jumper wire from the data connector. This is the same process that I use/used to reprogram my stock key fob. It's word for word on how to do this on your Avenger/Sebring. Since it's not in my own words I used quotes and it was written (or copied) by several folks with either 2G Eclipses/Talons or Avenger/Sebrings,


Hope helps.

Feb 27, 2011 | 2002 Dodge Durango

Tip

2000 dodge caravan keyless entry


Here is a quick HowTo on programming your own keyless entry:

1) Turn ignition to OFF.
2) Locate the Data Link Connector, its a black 16 pin connector that is under the driver's side dash, right where your right knee would be. You have to look up into the dash from below to see it.
3) Ground pin 1 of the Data Link Connector by taking a wire or paper clip and running it from pin 1 to pin 4. Pin 4 is ground so you can just short pin 1 to 4 and it will be grounded. Grounding pin 1 tells the system you are ready to reprogram it.
4) Close all of your doors.
5) Turn the key to ACC then back off. The power door locks will lock/unlock. This is the signal that the system is ready for reprogramming.
6) Push a button on your key fob, doesn't matter which button.
7) If you have 2 key fobs, then press a button on the 2nd fob within 1 minute of pressing a button on the 1st fob. Both must be programmed at the same time. If you only have 1 fob then press a button 2 more times to signal that you only have one.
8) The doors will lock/unlock to signal the codes were received.
9) Remove the jumper wire from the data connector
Complete

on Jan 29, 2011 | Dodge Caravan Cars & Trucks

2 Answers

I went to change my security pin and now it asked for a puk code and my phone has locked and i need a PUK code to unlock it


Hello,

PUK stands for the PIN Unlock Key. You usually get this when you have entered the wrong PIN for 3 consecutive times.

You can get the PIN from the SIM card provider. It is usually on a small piece of paper that came along with the SIM card case. If you are on post-paid, ask assistance from your phone provider.

Good luck!

Jun 23, 2010 | LG KS360 QWERTY Keyboard Phone BRAND...

1 Answer

Samsung Eternity Cell Phone key pad locked... Improper codes or pin 3's were used and is now locked... How can we unlock?


Hello,

PUK stands for the PIN Unlock Key. You usually get this when you have entered the wrong PIN for 3 consecutive times.

You can get the PIN from the SIM card provider. It is usually on a small piece of paper that came along with the SIM card case. If you are on post-paid, ask assistance from your phone provider.

Good luck!

May 14, 2010 | Samsung Eternity Cell Phone

1 Answer

Reprogram key fob


Here is a quick HowTo on programming your own keyless entry:

1) Turn ignition to OFF.
2) Locate the Data Link Connector, its a black 16 pin connecter that is under the driver's side dash, right where your right knee would be. You have to look up into the dash from below to see it.
3) Ground pin 1 of the Data Link Connector by taking a wire or paper clip and running it from pin 1 to pin 4. Pin 4 is ground so you can just short pin 1 to 4 and it will be grounded. Grounding pin 1 tells the system you are ready to reprogram it.
4) Close all of your doors.
5) Turn the key to ACC then back off. The power door locks will lock/unlock. This is the signal that the system is ready for reprogramming.
6) Push a button on your key fob, doesn't matter which button.
7) If you have 2 key fobs, then press a button on the 2nd fob within 1 minute of pressing a button on the 1st fob. Both must be programmed at the same time. If you only have 1 fob then press a button 2 more times to signal that you only have one.
8) The doors will lock/unlock to signal the codes were received.
9) Remove the jumper wire from the data connector.
10) your done

May 15, 2009 | 2000 Dodge Durango

1 Answer

Want to install a jack to connect ipod to radio


I have heard of a way to wire this (5) pin connector to headphone cable

Connector

[ PIN A ] [EMPTY ]
[ RIGHT] [LEFT ]
[ PIN D ] [GROUND]

Loop together PINA and PIND with a 1.5K Ohm Resistor

Apr 12, 2009 | 2007 Suzuki Aerio

1 Answer

Card Lock, when the card is not locked.


Solution,
Wrap the Camera with the purchese receipt, and bring it to the store you bought it from. They will send it back to Canon to be fixed. Hopefully it happened within a year from the purchesing date, so you will be fully covered by the manufacure warranty.

Good luck.

Dec 03, 2008 | Canon PowerShot A75 Digital Camera

1 Answer

2000 dodge caravan


Here is a quick HowTo on programming your own keyless entry:

1) Turn ignition to OFF.
2) Locate the Data Link Connector, its a black 16 pin connecter that is under the driver's side dash, right where your right knee would be. You have to look up into the dash from below to see it.
3) Ground pin 1 of the Data Link Connector by taking a wire or paper clip and running it from pin 1 to pin 4. Pin 4 is ground so you can just short pin 1 to 4 and it will be grounded. Grounding pin 1 tells the system you are ready to reprogram it.
4) Close all of your doors.
5) Turn the key to ACC then back off. The power door locks will lock/unlock. This is the signal that the system is ready for reprogramming.
6) Push a button on your key fob, doesn't matter which button.
7) If you have 2 key fobs, then press a button on the 2nd fob within 1 minute of pressing a button on the 1st fob. Both must be programmed at the same time. If you only have 1 fob then press a button 2 more times to signal that you only have one.
8) The doors will lock/unlock to signal the codes were received.
9) Remove the jumper wire from the data connector.

Oct 11, 2008 | 2000 Dodge Caravan

1 Answer

My lg kf600 phone is requesting a puk code, what is it?


You must have entered PIN or PIN2 code wrongly 3 times, so it is locked now. Now you need PUK (personal unblock key) from your network operator. Call customer care(tollfree) and ask for PUK and PIN/PIN2 codes. Be ready to provide sim number usually written on the SIM card and yes, keep pen/paper ready to write down the codes.

Sep 20, 2008 | Cell Phones

1 Answer

I need product key of office 2007


i purchesed pinnacl studio 11.i all ready paid 1000 dirhams(u k)mony.i want additional key of this system.i am in india i want your help sir.(8410-07429-01this is num of that prods)

Jul 24, 2008 | Microsoft Office Professional 2007 Full...

Not finding what you are looking for?
Microsoft Office Professional 2007 Full Version for PC Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2644 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...