Question about Radio Shack Pro-96 Scanner

1 Answer

All channels locked out

I can not get anything on the scanner. I have reset and still all channels locked out.

Posted by on

  • 4 more comments 
  • cqdcqdcqd Aug 09, 2008

    My scanner has completely locked me out. I tried resetting without any results- it just comes back to where it was. It doesnt respond to any keypad entry so I cant initialize. Just for the sake of it I replaced the batteries....nothing.



    All I am left with is a white noise generator! I am rather disappointed with this receiver since it has hardly been used and therefore never abused.

  • Anonymous Aug 19, 2008

    ALL CHANNELS LOCKED OUT

  • Anonymous Aug 30, 2008

    all channels locked out

  • steve819 Oct 04, 2008

    Are you saying you can not fix this and have to bring it back to the store?



  • Shield1751 May 11, 2010

    My pro-96 is showing all locked out...I bought it to listen to Philadelphia Police which is an 800 mhz Motorola trunked system... It worked for 3 years or so and then it locked out one of the channels by itself. I reset it...and now...i tried to upload the freqs using win96 and even that doesnt work anymore. Do i have a probelm with hardware in the scanner? i seem to be able to enter stuff manually by the keypad...but that is really slow and tedious...any ideas...its out of warranty so I can't do that.




    Paul

  • Anonymous Mar 13, 2014

    all channels are locked out how do i reset the scanner?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

If you had your scaaner for less than a year, you should return it to the place that you purchased the unit T will be still under warranty. My guess would be, you have a bad logic circuit.

Posted on Aug 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to know how to reset my Realistic pro-41


PRO 41 10 Channel Programmable Scanner 200 0301 Operation here is a link to instructions on how to unlock the channels or reset your device, hope this helps

Sep 02, 2014 | Radio Communications

1 Answer

Scanner pro 93


reset it one more time and let the scanner boot before you do any thing else chill out for while dont be so egor

Sep 26, 2013 | Radio Communications

1 Answer

I have the BC370CRS SCANNER I am trying to clear all the memory and reset it. It is telling me to hold down 2, 9, and hold and turn it on. That is not working. Can you please tell me another way to do...


Locking/Unlocking Banks When you are scanning conventional banks, the scanner displays the digit corresponding to all unlocked banks. To lock out a bank so that the scanner does not scan its channels, press the letter that corresponds to the bank. The bank's letter disappears from the display. To unlock locked-out banks, simply press that bank's letter again. The bank's letter appears on the display and the scanner includes that bank when scanning. Note: You cannot lock out all banks. One bank must be unlocked at all times. Locking/Unlocking Channels To lock out a channel so that the scanner does not stop on it while scanning, press L/O when the scanner is stopped on that channel, or manually select the channel and press L/O. To unlock the channel, manually select it and press L/O again. Restoring All Locked Out Channels You can restore all locked-out channels in a bank only when the bank is selected for scan. Follow these steps to restore all locked-out channels in a bank. 1. If you de-selected the bank, press SCAN then press the bank's letter. 2. Press MANUAL. 3. Hold down L/O for about 2 seconds. The scanner beeps twice and unlocks all To delete a stored frequency, press 0 then press E. Channels with no frequencies are automatically locked out hope this helps

Mar 29, 2011 | Uniden BC370CRS Base Scanner

1 Answer

Wanted to program frequencies into the scanner but it is frozen where i cannot go inot manual and scan. All other functions work such as weather channel lock, light, etc. Capitol P on the left side of...


This is a new one on me. Press the review key to see if there is a frequency programmed on what could be channel 8 (P missing a segment of the display). Press the manual button then the period twice. If all else fails, open the case and push the reset button.

Jun 15, 2010 | Uniden BC60XLT-1 Handheld Scanner

1 Answer

Bearcat scanner lockout on and i want it off


You didn't provide a model number, so this response is a little generic and applies mainly to late model Bearcats. To release an individual programmed channel from lockout, stop the scanner on that channel (select and press MANUAL) then press the Lockout (L/O) key. Any unprogrammed channel, displaying 000.0000, will show as locked out. Programming a frequency into it automatically releases the lockout. If all channels are showing as locked out you may need to reset the scanner. The reset procedure varies my model, so I'll need the model number to describe the steps.

Bill B

Mar 07, 2010 | Uniden Radio Communications

1 Answer

All channels are locked out


You might go to this site and try the "reset" mode. This will clear all channels, but may allow your scanner to once again work properly after frequencies are put back in. http://marksscanners.com/97/97.shtml#reset At least it costs nothing to try!....Good luck!

Jan 21, 2010 | Radio Shack Pro-2055 Base Scanner

3 Answers

Locked out!


press and hols down the "LOCK" for three seconds

Aug 16, 2007 | Radio Shack Pro-82 Scanner

1 Answer

All Channels Locked


I was told it was because all transmitters are going digital on Jan 1 07. and these scanners will be useless then :(

Nov 24, 2006 | Radio Shack Pro-95 Handheld Scanner

Not finding what you are looking for?
Radio Shack Pro-96 Scanner Logo

Related Topics:

324 people viewed this question

Ask a Question

Usually answered in minutes!

Top Radio Shack Radio Communications Experts

Iron
Iron

Level 3 Expert

3018 Answers

Robert McClure

Level 2 Expert

160 Answers

John
John

Level 2 Expert

509 Answers

Are you a Radio Shack Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...