Question about Canon imageRUNNER C3200 Copier

1 Answer

E000001-0003 I have a canon image runner 3200 that is giving me an e000001-0003 code. I turned the unit off anf then back on, but that did not help. Any other ideas? Thanks

Posted by on

  • Anonymous Jul 28, 2008

    my error code is E 000001-0004 ???????

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 47 Answers

First verify that the fuser drawer is inserted correctly and there is no debris in the fuser connector. Also check the fuser for paper wraped around the roller. Next, enter service mode ( 'additional functions', 2&8 same time, 'additional functions') press copier->function->clear->err->ok. Then power cycle the device. NOTE: Only do this procedure ONCE! Repeatedly resetting this error can cause the fuser to melt down or even cause a fire. Allow the fuser to cool for at least 20 min before attempting again. If this does not work then there is a problem with the fuser heater or temperature sensing and a new fuser or additional repairs may be required.

Posted on Jul 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 324 singer memomatic. Carriage is stuck solid and won't move. It has been stored for a long time. Is it possible to get the carriage off in this instant if so how?


First are you referring to all internal carriage working parts or just bobbin workings ? I just got done last nite with a Kenmore that was sitting who knows how long and was completely froze internally and bobbin area covered with green muck . After cleaning that up still froze ,oiled any and all mechanical points and rocking back and forth about to give up ,found one more location on back of machine ,oiled heavy and began turning very hard over and over and became loose enough for motor to turn . So don't give up . Good Luck .
Regards , Douglas

Jan 13, 2017 | In Office Equipment & Supplies

1 Answer

My image on my Hitachi 3lcd cp-x2515wn projector is upside down. Help!! Students are waiting!! :-/


try on the remote

menu - setup -mirror - v -invert

or
menu - main - mirror - v-invert

Jan 11, 2017 | Hitachi Office Equipment & Supplies

1 Answer

My Canon PIXMA MX700 is not turning on! I have checked all the cords even moved from one outlet to another and its still not turning on. Should I just purchase an new one this model is an old on


Do you have a CD to install this printer? if you do go into MY COMPUTER where you can erase things and erase the printer and its system then shut computer off and restart then reinstall the printer using your CD to reinstall it. Some times you have to delete things and reinstall them to work.

Jan 09, 2017 | Canon Office Equipment & Supplies

1 Answer

HOW DO I un-lock the scanner on a Brother MFC 7420?


Unfortunately, the MFC-7420 doesn't have a physical lock switch. You need to turn off the all-in-one and wait for the unit to clear its memory. If the error recurs after you press the power button again, wait 30 minutes and try again. (Note: you will lose any faxes that are in memory. See the User Guide page 11-5 to save this information.) You can find the manual on the Brother support page for the MFC-7420: https://www.brother-usa.com/support/ModelInfo.aspx?R3ModelID=MFC7420 . Click on the Manuals & Documents tab. Then click on the Manuals on our Online Solution Center for the English version of the manual. The direct link to the User Guide is currently: http://download.brother.com/welcome/doc000387/ALLFB_UsaEngUsr_B.pdf .

You can also try unplugging the all-in-one for several minutes to reset the error codes. If the error persists, contact Brother if the MFC-7420 is still under warranty (1 year). If it isn't under warranty, consider replacing the unit. The repair costs may be unreasonable.

I hope this helps.

Cindy Wells

Jan 09, 2017 | Brother MFC-7420 Printer

3 Answers

How do i solve an error e000-0000 canon ir 2202 please


Dear
Its related to the fixing temp. do the error clear on service mode. then check the fixing film assy. heater circuit contact points for corrosion. Replace it.
Thanks.

Dec 12, 2014 | Canon Office Equipment & Supplies

1 Answer

How to clean ink absorber for canon mp237


First of all open the ink cartridge of your printer.
When the ink cartridge would move all the way over, then disconnect the power cord of your printer.
Now pull the frame of rubber from the printer and remove ink pads.
To clean ink pads you may place them in a bowl having warm water and start rubbing and squeezing them to clean it from ink.
After removal of ink, keep the pads separate for dry.
When the pads get dry completely, place them back in rubber frame.
Reinstall the rubber frame in your printer.
For deep guide and support refer to-
Canon Pixma Mp237 Manual

Oct 07, 2013 | Canon PIXMA MP230 Multifunction color...

1 Answer

Why does canon MP258 printer with scanner can't scan japanese yen paper bill amount 10,000. I tried it over 10 times but it stops,. And when i tried US paper bill, it works well. I need some explanation...


When you scan with any scanner it utilised the software with "Optical Character Recognition functions, usually abbreviated to OCR -> OCR is a field of research in pattern recognition, artificial intelligence and computer vision." to scan and record the scanned object, sometimes it does not or cannot recognise certain symbols or characters because of man made software & hardware have its limitations too.

Hope it helps.

Nov 12, 2010 | Office Equipment & Supplies

2 Answers

HP printer psc 2210 all in one


Chances are that you didn't lock down the scanner when you moved the unit. You can attempt to open the unit and move the scanner bar manually to reset it. HPs are very difficult beasts when it comes to their power up check out. It must be fully functional...including all cartridges...to work in most cases. Good luck.

Dec 20, 2007 | Office Equipment & Supplies

6 Answers

Printer won't recognize cartridge


I had the same problem. I'm not sure but I think I replaced the cartridges when the printer was on because I turned the printer off and removed one of the cartridges. When I turned the printer back on it recognized that cartridge but not the others. I turned the printer off again, rmoved all cartiridges and put them back in when the printer was still off. When I turned the printer on again I had no problems. So...try turning off the printer, rmove all cartridges, then put them back in and restart printer. Hope this works for you .

Nov 28, 2007 | Epson Stylus 2200 InkJet Photo Printer

Not finding what you are looking for?
Canon imageRUNNER C3200 Copier Logo

1,265 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

100243 Answers

old marine
old marine

Level 3 Expert

1661 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...