My telefone sony k610i works, but if I want to use the camera, the hole machine is blocked. Any button can interere or reset onto the main menu. The only sulution is to take out the battery. Can this problem be fixed?
Re: phone works but camera blocks the whole machine
Check for the memory on the handset also try performing a reset settings on your handset.
steps for reset settings :Menu--Settings--Master Reset--Reset settings..
Please remember this would not delete any of your data but the phone will go back to the original settings
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You may try by following instructions given below.
Warning: Do not enter any wrong unlock unlock codes on your Sony Ericsson K610i mobile phones. If you enter over a certain amount of wrong unlock codes on your mobile phone, your phone may get hard locked and sometimes become unusable.
1 - Switch ON your Sony Ericsson K610i mobile phone without any SIM Card, 2 - Press the left arrow key/button once, 3 - Press the button * twice, 4 - Press the left arrow key/button once, 5 - The message "Personalize with MNC2" will appear, (or you will have displayed an unlock menu, select the lock you want to unlock) 6 - Enter the Unlock Code.
If your Sony Ericsson K610i mobile phone does not have a left arrow button/key(e.g. Sony Ericsson W950i) and on a few phones(not all) that have a "JOGDIAL" you must press the "down arrow" key/button instead of the "left arrow" key/button for step 2 & 4. We mean by "Down Arrow" to direct the Jogdial down! In the Sony Ericsson W950i and some other models, the down arrow button/key would be located on the side of the phone.
Please ensure that all drivers are installed. Check in device manager.
Right click on my computer and select properties. Then select the hardware tab and device manager in that section. If any drivers are not installed properly they will appear with a yellow exclamation mark. Reinstall these.
If all drivers are installed correctly check the contacts on the phone as sometimes the tend to get dirty and block the signal. also check if cable is faulty.
check for the memorycard size is it the same that came with the handset try using the phone without the memory card for 24-48 hrs if the phone works fine without the memory card then the memory card is faulty if the phone still does not work properly then it should be repaired.If the phone is under warranty then give it to the manufacturer for repairs