Question about Sanyo DS24205 24" TV

1 Answer

Clicks on and off....

I obtained 2 identical models and chassis of this TV, and the only difference is the mfg date, one in 2005 and the other in 2007. Both do not work and seem to have different problems. 1 of them will come on only for a second and will turn off then back on and off over and over until I unplug it. When I plug it back in, it wont do anything untill i hit the power button again leading me to believe that it wasn't a stuck button, but I could be wrong. After researching similar issues that others have had, it sounds like it could be the flyback. I would like to know if would be somewhat reasonable to assume that it is what is wrong with it. To add to the question is the fact that the other TV doesnt do anything and if it would be ok to try to replace the flyback with the other one, although that one could be bad as well. The other one is just plain dead which I am guessing could be something as simple as a blown fuse, thats if I am lucky. If it is something else then hopefully I could salvage the flyback from it to try to fix the other one. I am NOT a technician by no means and do understand the dangers of servicing a television set. I have never worked on a TV before but have looked inside them before. I can solder and can discharge the TV. What my point is, is that I will not take a piece of junk to a tech to waste his time or mine for junk that I don't want to waste money on, unless its minimal. And I will not kill myself trying to fix it, I know the dangers and usually never attempt any task that I never accomplish. I really would just like an opinion. Would it be possible at all to fix one with the other using used parts assuming that the parts replaced was still good from its original TV. If the fuse is blown in the other one, Ill change it and if it doesn't blow a fuse again, then eureka! One is fixed and on that note might purchase a flyback for the other one and call it a 50 dollar pricetag for 2 working TV sets. If not, then maybe pull the flyback out and donate that organ to the other one that makes the clicks of on and off. Im assuming that it could be more than just one thing and it cant be diagnosed without physical testing of certain things, but have time to try swapping of parts if it is possible. Any ideas or opinions would be highly appreciated. The chassis number was the same as the model number. A Sanyo (dont really like the brand to be honest, just me though)
24" DS24205 and assume it was some walmart super-special (buy one get one free deal apparently) Yea... different dates, like their milk. Thanks in advance for anyone with actual advice, thoughts, help or opinion other than letting me know the fact that a technician should service the TV to be on the safe side. Maybe some help on this might help others that seem to have similar problems with different TV brands ect.

Posted by on

  • evilzom Jul 26, 2008

    well, the computer generated solution didn't help, Ill wait until someone else can help.

  • evilzom Jul 26, 2008

    Wow I thought that it was a server reply or something because it was almost instant that I got a response to my question... ya understand. yea I wanna keep both cause they are the exact same model and look pretty nice. Thanks jmeridith.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 417 Answers

Hi,
Ive had a few sets go for no reason later finding out that a spouse had a PLANT above the tv and watered it and a few hours later no go, also my cat sprayed my tv once and it was shot after that, maybe also try and airdust it real good all over, I fixed one one time by just having an extra fan assembly I took out of an old microwave constanly on and pointed at the heat sinks and it worked for a few more years like that, just a couple of ideas for ya,

J

Posted on Jul 26, 2008

  • Jude Meredith
    Jude Meredith Jul 26, 2008

    I have a 35 inch sanyo tv I got at walmart in 2002 for 577.00 no problems and seems to be a very good set, I would recommend keeping those sets and fixing them if you can, they have a nice sharp picture, sorry I wasnt any help



    J

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How Can I Obtain the Serial Number of a Modular Switch?


Obtaining the Chassis Serial Number · On a standalone switch:
Log in to the switch through Telnet or the console interface, and then run the display elabel backplane command in the user view to view electronic label information. In the command output, the BarCode field indicates the chassis serial number.
<Quidway> display elabel backplane
Info: It is executing, please wait...
[BackPlane_1]
/$[ArchivesInfo Version]
/$ArchivesInfoVersion=3.0

[Board Properties]
BoardType=EH02BAKKBarCode=2102113089P0BB000881
Item=02113089
...............
· In a CSS:
Log in to the master switch through Telnet or the console interface, and then run the display elabel backplane chassischassis-id command (chassis-id specifies the CSS ID of a member chassis) in the user view to view electronic label information. In the command output, the BarCode field indicates the serial number of the specified chassis.
<Quidway> display elabel backplane chassis ?
INTEGER<1-2> Chassis ID

<Quidway> display elabel backplane chassis 2
Info: It is executing, please wait...
[BackPlane_2]
/$[ArchivesInfo Version]
/$ArchivesInfoVersion=3.0

[Board Properties]
BoardType=EH02BAKKBarCode=2102113089P0BB000881
Item=02113549
...............

NOTE:
The command syntax may differ in different software versions. You can enter a question mark (?) to obtain help information about the command and set the chassis ID according to the help information.
Obtaining the Serial Number of a Card Log in to the master switch through Telnet or the console interface, and then run the display elabel command in the user view and specify a slot ID according to help information to view the electronic label of a card. In the command output, the BarCode field indicates the serial number of the card.
<Quidway> display elabel ?
<1-1> The present chassis
backplane Backplane
brief Display information briefly
<Quidway> display elabel 1/?
<4,6-8> <CMU1>
<FAN1-FAN2> <PWR1-PWR2>
<Quidway> display elabel 1/6 brief
Info: It is executing, please wait...


[Slot_6]
/$[Board Integration Version]
/$BoardIntegrationVersion=3.0


[Main_Board]
/$[ArchivesInfo Version]
/$ArchivesInfoVersion=3.0


[Board Properties]
BoardType=ET1D2S08SX1EBarCode=020LVF6TBB000043
Item=03020LVF
...............
NOTE:
The command syntax may differ in different software versions. You can enter a question mark (?) to obtain help information about the command and set the slot ID according to the help information.
Obtaining the Serial Number of a Power Module Log in to the master switch through Telnet or the console interface, and then run the display elabel command in the user view and specify a slot ID according to help information to view the electronic label of a power module. In the command output, the SN field indicates the serial number of the power module.
<Quidway> display elabel ?
<1-1> The present chassis
backplane Backplane
brief Display information briefly
<Quidway> display elabel 1/?
<5,8,13,16> <CMU1>
<FAN1-FAN5> <PWR1-PWR4>
<Quidway> display elabel 1/PWR1
Info: It is executing, please wait...

[Slot_21]
/$[Board Integration Version]
/$BoardIntegrationVersion=3.0


[Main_Board]
DATE=13_02_08 SN=A664A0212080086V0.9A
NOTE:
The command syntax may differ in different software versions. You can enter a question mark (?) to obtain help information about the command and set the slot ID according to the help information.
Obtaining the Serial Number of a Fan Module Log in to the master switch through Telnet or the console interface, and then run the display elabel command in the user view and specify a slot ID according to help information to view the electronic label of a fan module. In the command output, the BarCode field indicates the serial number of the fan module.
<Quidway> display elabel ?
<1-1> The present chassis
backplane Backplane
brief Display information briefly
<Quidway> display elabel 1/?
<5,8,13,16> <CMU1>
<FAN1-FAN5> <PWR1-PWR4>
<Quidway> display elabel 1/FAN2
Info: It is executing, please wait...

[Slot_18]
/$[Board Integration Version]
/$BoardIntegrationVersion=3.0


[Main_Board]
/$[ArchivesInfo Version]
/$ArchivesInfoVersion=3.0


[Board Properties]
BoardType=LE02FCMC BarCode=2103010JTF0123456789
Item=02120995
...............
NOTE:
The command syntax may differ in different software versions. You can enter a question mark (?) to obtain help information about the command and set the slot ID according to the help information.

Jul 22, 2016 | Computers & Internet

1 Answer

Where can I find a manual for polaroid 22" tv/dvd #TDAC -02212?


http://tv.manualsonline.com/manuals/mfg/polaroid/tda03211c.html

May be suitable for your model; it is nearly identical.
Also, try contacting the maker directly.

Dec 11, 2014 | Polaroid Televison & Video

1 Answer

Solution-GE spacemakerXL microwave oven model:JVM16505H01 mfg.date:feb.2005


Sounds like you have a bad smart board, you can try unplugging the unit for five minutes and then back in, if you are lucky this may correct the problem...good luck

Feb 18, 2014 | GE Microwave Ovens

1 Answer

Information about stroller Emmaljunga


I bought a emmaljunga classic pram off a friend but it it 8yrs old. The chassis is broke so i need a new one. I typed the model number into a search online a the chassis now looks different to mine. Mine doesn't have a easy catch on. You have to slide it in to place till it clicks. Any advice to what i should do

Jul 02, 2012 | Baby Gear

2 Answers

I was given a Dorel Convertible carseat, Model 22-208-WAL to use for a "grandmother's" vehicle. The straps were taken out when it was previously used as a booster seat for an older child. How do I put them...


Here are the links to download Dorel carseat instructions:

Canada:
http://www.eddiebauer.djgusa.com/can/eng/instructions
USA:
http://www.eddiebauer.djgusa.com/usa/eng/Instructions

Mar 24, 2010 | Dorel Juvenile Group 22741 ATI Convertible...

1 Answer

TV not turning on blinking powerlight with corresponding clicking


Zenith2.gif "Presentation" is just the name of the general model.

Is it a Z37LC6D LCD TV?

Please reply with the model number and the MFG DATE so I can assist you better.

===

Check the rear for the exact model and the MFG DATE on the FCC label.

Check for loose power cable to the TV.

Make sure the socket the TV plug into is not overloaded.

An overload is dangerous and the voltage drop will cause the TV power supply from turning on.

If possible plug the TV into a different //// empty outlet.

A clicking sound is a signal of a failing power supply or low line voltage from the wall socket.

Please update you post on the reply window.

Oct 16, 2009 | Televison & Video

1 Answer

RCA Model 32V434T chassis ATC010A


for shure your fly back transformer is bad is a commom problem in this chassis

Mar 29, 2008 | Televison & Video

1 Answer

Click, click, click and nothing else.


your set have gone into shutdown,it will try 3 time to correct itself then shut down you might all have different faults. call your local shop and ask for an est, cost to repair ,it may not be all that bad news. depending on your chassis type there different quick fixes to save money and time ,when you post your sets always say what chassis also./st

May 19, 2007 | Proscan PS32500 32" TV

Not finding what you are looking for?
Sanyo DS24205 24" TV Logo

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72620 Answers

 Grubhead
Grubhead

Level 3 Expert

4852 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Sanyo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...