Question about Projection Televisions

1 Answer

DLP Projection tv, Models WD-52631,57731,65731. The tv powers on but the screen remains black, the audio comes on but after approximately 30-40 seconds,the audio starts to skip and then the entire tv system shuts down. I reset it a few times but that doesn't change the problem.

Posted by on

  • 1 more comment 
  • rymiller Mar 07, 2009

    I have a DLP model 65731. The tv powers on but the screen remains black, the audio comes on but after approximately 30-40 seconds,the audio starts to skip and then the entire tv system shuts down. I reset it a few times but that doesn't change the problem.

  • Anonymous Mar 21, 2014

    I have a model no. WD-82837 mitsubshi DLP. When I power it on the welcome screen comes for about 30 seconds and then the tv shuts off before the picture ever comes on. what's the problem?

  • Anonymous Mar 21, 2014

    I have a Mitsubishi model no.WD-82837. When I power it on, the welcome screen comes on for about 30 seconds and the tv shuts off before it shows a picture. What do you think is the problem?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

DLP Projection tv, Models WD-57731, The tv powers on but the screen remains black, the audio comes on but after approximately 30-40 seconds,the audio starts to skip and then the entire tv system shuts down. I reset it a few times but that doesn't change the problem

Posted on Dec 14, 2008

  • kittyfish Dec 14, 2008

    what could the trouble be if the tv powers up sound but no pic the lamp light is not on

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

SPEAKER PROBLEMS


If you are coming out of the cable box then you need to run a pair of audio feeding the audio to the tv. The other thing to look at is that you have the audio and video connected to the same input on the tv.

Nov 18, 2013 | Mitsubishi WD-73C9 73" DLP TV

1 Answer

How can you diagnose a failed lamp in a Mitsubishi DLP WD 52631


Remove the lamp and do a visual inspection.
If this is a DLP you may have a bad color wheel! whistling sound is a sign of color wheel.

Good luck to you

www.aaatvservice.com

May 08, 2012 | Mitsubishi TV Lamp 915P049010 for WD-52631...

1 Answer

When you turn the TV on it stops at the blue Mitsubishi screen and the power button just blinks. You have to then unplug the TV to power down. Pushing the power button on the TV or remote will not power...


Hello,
There is a software update that is available for some Mitsubishi dlp models. The wd-65c9 is one of them. When I experienced your problem, I went to the website, downloaded the update, and installed it on my tv and boom, its fixed. It's super easy, free, and takes a few minutes.

Jan 31, 2011 | Mitsubishi WD-65C9 65" DLP HDTV

1 Answer

Posted a short while ago but have more information Mitsubishi DLP WD 52725 - sound no picture - blinks 3 short times and 1 long time


have you checked the lamp? with those models they will power up and if the lamp is bad you can hear audio until the tv shuts off. the lamp is located in the front behind the speaker grill assembly. if the "status" light is blinking then you are having a fan failure if the "lamp" light is on then check the lamp like i listed above.

Jan 06, 2011 | Mitsubishi WD-52725 52". Rear Projection...

1 Answer

My Mitsubishi WD-62725 dlp powers up , no blinking lights, the screen on all inputs is blue with streaking horiz lines and snowball in center screen. Menu works, tuner seams to work but screen goes black...


Call Encompass Parts 1800-638-3328 or look them up online they list your TV as well as Service Manual and Keep in Mind just because Light Engine was replaced 3 months ago does not mean it cannot be same Problem so if you have any warranty on it replace it again!

Nov 18, 2009 | Mitsubishi WD-62725 62" Rear Projection...

3 Answers

Mitsubishi DLP overheating


Mitsubishi has problems with the thermal sensor going bad. They extended the warranty for several sets. The sensor is right by the lamp. Call mitsubishi and insist they do something for you. If you keep playing your set, the bulb could also be at risk. I would think your set is covered being a 62" set. Good-luck and be sure to act ASAP.

Dec 07, 2008 | Mitsubishi WD-52725 52". Rear Projection...

2 Answers

Mitsubishi DLP overheating


check your air intake filters, it's a removeable filter in the air inlets.

May 04, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

243 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...