Question about Texas Instruments TI-84 Plus Silver Edition Graphic Calculator

1 Answer

"Err: Data Type" - Not Allowing Me to Graph

I don't remember what button I pushed to make this happen, but when I push any of the buttons right under the screen, it says "Err: Data Type. 1: Quit. 2. Go to.
This is not allowing me to graph anything and I don't know how to fix it so that I can graph. Please help! Thanks.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 132 Answers

First, turn it on. Once the calculator is on, press the "2ND" key (I believe it is a blue key in the ti-84 plus silver edition). Now press the plus key (+). A little above that key, you should see the word "mem." When you see the screen titled MEMORY, move the cursor all the way down to the option that says "Reset." From here, you can choose to reset either the RAM memory, or the factory settings. The factory settings are the "Defaults" option. I hope this helps.

Posted on Aug 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Don't know how to open trunk, Jaguar s-type 2002


i have a 2002 stype jaguar and there is a key slot underneath where the lights for the number plate is situated. slightly to the right.

Dec 04, 2012 | 2002 Jaguar S-Type

1 Answer

I think I pushed a button [2ND][+], and [ClrAllLIsts]. After that, I tried to draw graphs, but when I push the [GRAPH] button or [ZOOM][5]/[6], it doesn't make any graph! What should I do...??


You do not say that you opened the Y= editor and typed in at least one function and THEN pressed Graph. If you do not enter a function, all you will get are the axes (if the calculator is configured to display the axes.
1. Open the Y= editor.
2. Type in a function EXample y=2X+1 (To type X press the [X,T, Theta, n] key)
3. Press ENTER to validate the function.
4. Press the GRAPH button.
5. If you do not see a straigt line press the ZOOM button
6. Select ZoomSTD

Sep 04, 2011 | Texas Instruments TI-84 Plus Calculator

1 Answer

Hi, I need to graph with my TI 83 but I've run into a problem when trying to enter the (x,y) points that need to be plotted. From the beginning, I push "STAT" and highlight where it says...


Turn calculator on. Press the STAT button. In the new screen that displays, press 5:SetUpEditor, then ENTER. The deleted lists will be restored. Any data that was in them will not be recovered.

Jul 26, 2011 | Texas Instruments TI-83 Plus Calculator

1 Answer

My TI 84 plus silver: whenever I push the graph button the message ERR: Syntax 1:quit 2: goto appear on screen please help


Press the Y= button.

There are several possibilities:

1) Scroll through all equations, Y1 through Y9 and Y0. Make sure they are cleared.
2) The equation you typed in is not entered correctly.
3) Make sure Plot 1, Plot 2, and Plot 3 are NOT highlighted.

Feb 01, 2011 | Texas Instruments TI-84 Plus Calculator

1 Answer

On my TI-83 Plus, when I push the graph button, it says ERR:INVALID DIM. how do I fix that


You're probably trying to graph a function that does not involve stat plot features. You can correct this by turning off the stat plot features. Press "2ND" "STAT PLOT" and then select 4:PlotsOff.

Jan 03, 2011 | Texas Instruments TI-83 Plus Calculator

1 Answer

I have a problem with mij calculator, When I push the GRAPH button, their comes a ERR:INVALID DIM message. Do you know the problem?


You're probably trying to graph a function that does not involve stat plot features. You can correct this by turning off the stat plot features. Press "2ND" "STAT PLOT" and then select 4:PlotsOff.

Oct 05, 2010 | Texas Instruments TI-83 Plus Calculator

1 Answer

MY WASHING MACHINE THEY DONT START WHEN I PUSH START IT SHOW UP THE WORDS ERR AND LOC


LOC means it thinks the control panel is locked.
This gives the ERR indication when you push the buttons.
To unlock it you need to hold down the Options and Select buttons together until it reacts.

The LOC code merely means the control responded and locked the door. You'll find a tech sheet under the top panel of the machine to help guide you thru the diagnostic process, which is fairly involved.

LOC means it thinks the control panel is locked. This gives the ERR indication when you push the buttons. To unlock it you need to hold down the Options and Select buttons together until it reacts.

I know this may seem silly but - On the top right back corner of your washer hit it with medium force with your fist, this helps.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jul 02, 2009 | Kenmore Washing Machines

1 Answer

ERR:DATA TYPE


Have you checked your "window" settings?

X min=-10
X max =10....etc.

Please post bck if this didn't affect it.

Hope this helps!

Rumblin_Racer

Mar 11, 2009 | Texas Instruments TI-84 Plus Calculator

1 Answer

ERR: SYNTAX


Ok i had the same problem- If i remember correctly my "window" was messed up. Check it out... If not i always pull the "take batteries out while on" trick which resets the ram.

Sep 01, 2008 | Texas Instruments TI-84 Plus Silver...

2 Answers

Washer (laundry)


try pressing options and select for ten seconds if that doesnt work you have a promblem with the door lock switch open then shut your door firmly try it again if that doesent do it try unplugging the unit for 5-8 seconds then retry if that doesnt do it then pull the bottom panel and look on the left side of the washer there will be a envelope with a tech sheet there with instructions on testing the door lock itself

May 16, 2008 | Frigidaire GLTF2940ES Front Load Washer

Not finding what you are looking for?
Texas Instruments TI-84 Plus Silver Edition Graphic Calculator Logo

768 people viewed this question

Ask a Question

Usually answered in minutes!

Top Texas Instruments Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

Stevan Milanovic

Level 2 Expert

258 Answers

Are you a Texas Instruments Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...