Question about PC Desktops

2 Answers

I have just installed BOOKKEEPER 2008. An error window keeps coming up Error # 3010 I need to get this fixed as quickly as possible. Thanks, Deb

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,011 Answers

Sir,

You should to deinstall / reinstall the program and that there was no assurance that all of your crucial data files would remain intact; It is to save your backup file first, reinstall the program and then reinstall the backup files.

After that u opened the Bookkeeper program files and started to fiddle around. You look at some of the files and came across a file marked "Install" with a yin-yan sort of icon next to it (136KB Application file.) When double clicked on it, watched as a small screen came up and several procesees started to advance. When it finished, u clicked "close."

Thanks
Good Luck


Don't forget to rate the solution

Posted on Jul 25, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 397 Answers

It looks like a file has been corrupted during the installation process.
Download and install CCleaner from www.ccleaner.com
Uninstall BookKeeper and then use the registry cleaning tool in CCleaner to clean up the registry of your computer.
Re-install BookKeeper and make sure no other programs are running on your computer during the installation.

Posted on Jul 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WINDOWS ERROR MESSAGE


boot from the CD copy of your windows XP. enter in console session and manually replace the file. if the file is corrupted this should fix it

Feb 26, 2012 | Gateway GT5026E PC Desktop

2 Answers

Error message after installing BOOKKEEPER 2008


Error 3010 is a type of system error with multiple potential software or hardware causes. it could probably cause by the software you recently installed, download a registry cleaner or registry fix software and run through all your programs, you might need to uninstall and install your bookkeper once again.

Jul 25, 2008 | PC Desktops

3 Answers

Has a blue screen


So many computer face this blue screen fetal errors on windows.

This error comes usually when there is problem in software or driver compatibility issue with hardware or operating system.
Also this error comes when there is bed indexing unit in hard drive.
You can solve this errors with following 2 methods.
(1)When you power up the computer press F8 key then enter in safe mode.
Then if you are able to enter in safe mode then uninstall driver or software which you installed recently and face this error.
(2)If you are not able to enter in safe mode Then you need to fix error on hard drive.For that you need windows disk or recovery disk.
Boot your computer with that disk
For that when you power up the computer press F1 or F2 "del" key to enter in bios.
Then go to boot menu and set first boot device as your cd or dvd rom.
Then save settings and exit bios.
Insert windows disk in cd /dvd rom.
Then it boot with that disk.Then you get this message "Press any key to boot from cd.."
Then press any key.
Then follow the procedure then enter in recovery console mode then type in prompt "chkdsk /r"
Then type "y"
Then it fix error on hard drive.
Then check if again you are not able to enter in windows then boot again and this time choose "R" option for repair previous windows " then it repairs old windows then it loads again old windows.
Thanks for using FixYa.

Aug 22, 2010 | Dell Dimension 2400 PC Desktop

2 Answers

Need to boot in restore mode. loaded a driver and its know going to the blue screen


So many computer face this blue screen fetal errors on windows.

This error comes usually when there is problem in software or driver compatibility issue with hardware or operating system.
Also this error comes when there is bed indexing unit in hard drive.
You can solve this errors with following 2 methods.
(1)When you power up the computer press F8 key then enter in safe mode.
Then if you are able to enter in safe mode then uninstall driver or software which you installed recently and face this error.
(2)If you are not able to enter in safe mode Then you need to fix error on hard drive.For that you need windows disk or recovery disk.
Boot your computer with that disk
For that when you power up the computer press F1 or F2 "del" key to enter in bios.
Then go to boot menu and set first boot device as your cd or dvd rom.
Then save settings and exit bios.
Insert windows disk in cd /dvd rom.
Then it boot with that disk.Then you get this message "Press any key to boot from cd.."
Then press any key.
Then follow the procedure then enter in recovery console mode then type in prompt "chkdsk /r"
Then type "y"
Then it fix error on hard drive.
Then check if again you are not able to enter in windows then boot again and this time choose "R" option for repair previous windows " then it repairs old windows then it loads again old windows.
Thanks for using FixYa.

Mar 13, 2010 | PC Desktops

1 Answer

My computer keep on re-booting


So many computer face this blue screen fetal errors on windows.

This error comes usually when there is problem in software or driver compatibility issue with hardware or operating system.
Also this error comes when there is bed indexing unit in hard drive.
You can solve this errors with following 2 methods.
(1)When you power up the computer press F8 key then enter in safe mode.
Then if you are able to enter in safe mode then uninstall driver or software which you installed recently and face this error.
(2)If you are not able to enter in safe mode Then you need to fix error on hard drive.For that you need windows disk or recovery disk.
Boot your computer with that disk
For that when you power up the computer press F1 or F2 "del" key to enter in bios.
Then go to boot menu and set frist boot device as your cd or dvd rom.
Then save settings and exit bios.
Insert windows disk in cd /dvd rom.
Then it boot with that disk.Then you get this message "Press any key to boot from cd.."
Then press any key.
Then follow the procedure then enter in recovery console mode then type in prompt "chkdsk /r"
Then type "y"
Then it fix error on hard drive.
Then check if again you are not able to enter in windows then boot again and this time choose "R" option for repair previous windwos " then it repairs old windows then it loads again old windows.
Thanks for using FixYa.

Jan 06, 2010 | Personal COMPUTER - LENOVO THINKCENTRE A61...

3 Answers

I am attemping to install SP2 for my Vista 32-bit


This article may be of some help. There is a command prompt command that will rebuild the WMI repository. It may fix your issue.

http://www.tech-archive.net/Archive/Windows/microsoft.public.windows.server.scripting/2008-05/msg00160.html

Sep 01, 2009 | HP Pavilion M9040N Elite Desktop PC

3 Answers

Turn on my computer works perfect then a sytem32 error occures then crashes to the blue screen(PAGE_FAULT_IN _NONPAGED_AREA) and motherboard makes a weird beep sound kind of like a bird.


Try to change the memory modules...if there is two inset 1 at a time and boot ur system to check if u still face the problem....if not try borrow a memory module..and check....it looks like its the memory in your case but if you u still have problem having verified that its not the memory...



First of all, you need to understand what "System32 corrupt or missing" actually means.
System32 is a vital part of your PC. You can look at it as the heart and brain of the Windows operating system without which, your computer would not be working at all. System32 is usually located in the C: drive under C:WindowsSystem32 or C:Winntsystem32 and is usually hidden in order to prevent any accidental alterations by the user.

Reboot your PC and press F8 during the booting sequence until you get into the boot menu. Select "Boot Using Last Known Good Configuration". Your PC will now try to startup using a configuration that has worked in the past. If you are still facing the System32 corrupt or missing error, you could try the following but you have to be careful. In case you are not comfortable messing with your system files, skip this part and continue reading the "Quick and Easy Fix" paragraph.
Use the Console to Fix the "System32 Corrupt or Missing" Error

Insert your Windows XP Recovery disk and reboot your PC. If you don't have a recovery disk skip this paragraph. Select the Recovery Console and type the following into the console.
This will recover your windows system but you need to be extremely careful that you are typing correct commands or everything gets even worse.
md tmp

copy C:windowssystem32configsystem C:windowstmpsystem.bak

delete C:windowssystem32configsystem

copy C:windowsrepairsystem C:windowssystem32configsystem

Quick and Easy Fix

In case you don't feel comfortable messing with your windows system; I suggest using a Windows System Repair tool which will scan your System and list all system errors before attempting to fix it. Besides solving the System32 corrupt or missing error, a system repair tool will ultimately speed up your System as it cleans and reorganizes your registry and deletes unnecessary files.
A commonly used tool is Errorsmart which is available for free at http://www.SpeedUpMyPc.Info Before re-installing windows or messing with your system, give Errorsmart a try and check if it is able to fix system32 corrupt or missing error

keep me posted

May 05, 2009 | Gateway GT5220 PC Desktop

1 Answer

I have just purchased Norton Antivirus 2008 and I cannot install the program. Keeps coming up error


It's possible you already have an antivirus program installed. You need to uninstall it, restart then install your Norton Antivirus.

Aug 29, 2008 | PC Desktops

1 Answer

I have try to install norton ANTIVIRUS 2008 on my system vista and keep getting a error msg need to updates but keep getting a error msg error trying to install updates.


From Norton website, this is the minimum specs inorder to make it work. Do you have this ?
  • 300MHz or higher processor
  • 256MB of RAM
  • 300MB of available hard disk space
** Must meet minimum Windows Vista operating system requirements.

May 06, 2008 | PC Desktops

1 Answer

Please quickly help


hi dear

try this site

http://bookkeeper-for-you.com/support/manual/index.cgi
http://www.know-accounting.com/pb-explained.html

oke

Mar 19, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...