Question about Zanussi WJD1667W Front Load Washer / Dryer
Hi, when I turn the machine on, there's a constant pumping noise heard - even with the door open. If I try and start a program, the door locks, then the display goes out, then reverts to the flashing 3-dashes. All along the pumping noise still going.
Don't mean to sound blunt or short in my suggestion but it sounds like a visit from the Service Force Team who deal with Zanussi repairs & spares.
Here is the contact phone number: 08705 929 929
Posted on Dec 20, 2008
Tips for a great answer:
Dec 04, 2014 | Maytag Washing Machines
Apr 15, 2014 | Maytag Centennial Top Load Washer
Nov 06, 2013 | Electrolux Washing Machines
Jun 16, 2011 | Whirlpool Washing Machines
If you need to stop or interrupt a program after you start the machine, turn the Program Control knob
to 10 (Drain). Any water in the machine will be pumped out and you can then press the Door Open
button ( ) to open the door. To restart the washer, close the door and turn the controls to the desired
On the electronic control models, if you need to open the glass door during a wash or rinse cycle, press and hold the Door Open button for three seconds. The machine will stop and automatically drain enough water so the door can be opened safely. The program will resume when you close the door. The inlet valve will come on to
ensure the proper water level.
In case of mechanical failure, you can use the Emergency Door Opener located by the drain pump. To use the Emergency Door Opener, remove the screw holding the cord handle (loop) and pull the cord down.
Hope this answers your question even if it isn't necessarily the answer you wanted. Thank you for choosing FixYa and good luck.
Jan 10, 2011 | Asko W6021 Front Load Washer
Jul 05, 2010 | GE Energy Star WCVH6260F Front Load Washer
Jan 07, 2009 | LG WD-1280FHD Front Load Washer
Sep 05, 2007 | LG WFT1071TP Top Load Washer
117 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: