Toaster button is broken - Black & Decker Textured TRO700 Toaster Oven with Convection Cooking

It could the the select switch might be broken then or it could be because it is also broken too and you should buy a new toaster oven.

Elizabeth, Google search your Microwave make and model# manual. This is how I would do it.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

If the filament is broken there is very little you can do other than fit a new filament.

By the time you have bought and paid for a new filament and fitted it, it would probably be cheaper to buy a new toaster.

The buttons latch is actually an electromagnet that is engaged and disengaged by a small timer located on the toasters circuit board. The most likely reason why the button will not stay latched is a bad connection to the magnet. Unplug the toaster and open the right side panel by removing the machine screw located on the underside of the toaster. You will notice a pretty simple circuit board with 2 (usually red) wires leading to the magnet. If you have trouble locating the magnet, push the "toast" button and watch out for the component it butts up too. Because the wires attached to the magnet are soldered firmly to the circuit board, the poor connection is usually at the magnet. Gently push the wires towards the magnet to ensure a good connection. To test, plug the toaster in, being sure to remove any tools or loose components from the toaster, and push in the button so see if it latches. If it does latch, open the door to disengage and unplug the toaster before reassembling. If it does not latch, you may need to replace the magnet.

It would help us to answer your free question here if you include a make and model #..

Also - your question looks a bit like a statement.. Please ask your question clearly..

Are you looking for a replacement timer button ?

Thank you..

My kitchen aid toaster oven when set on baking the light is not coming on.

Euro-pro.com, select toaster, plug in your model and choose manual. Just printed mine.

Try [email protected] They do thousands of parts for white goods.

I don't know if you can fix it but if you are good at basic diagnosis you can take off the right side and see if the toast latch is broken or perhaps out of place. This type of unit is not so easy to take apart and put back together. The parts fit is a bit strange.

its probably broken =[