Question about Flashlights & Headlamps

1 Answer

Mp3 that does not work

My mr3 player "etec" is not working. It does not work and if I put it in my computer it makes an error message "E/S error". In the front of the mp3 player say " Ver 2.600.100" and I dont know what is this. Can you help me please? I have a very important information on this player. Thanks a lot. www.gsm4yemen.com

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Nokia1208notcharing

Posted on Aug 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I changed the batteries positive to positive not working.


Put the batteries in positive (+) end first, continue putting the batteries in where the positive touches the negative (-) end of the previous battery.

Nov 18, 2016 | Energizer Flashlights & Headlamps

1 Answer

How can I get my Maglite working again?


Make sure you cleaned ALL the corrosion out of the battery cell, and also you may have a faulty On/Off button.?The battery contacts must be absolutely clean.That is my best assumption

Sep 03, 2014 | MagLite 3 "D" Cell Flashlight - MAGS3D116...

1 Answer

Does not work with new batteries/bulb


take the bottom piece off, remove the last battery and put a coating of petroleum jelly on the threads of the tube. Then take the bottom piece and run it all the way in and back off and back in 2 or 3 times.

Then put a little more petroleum jelly on the threads and put the battery back in and the bottom piece.

Aug 04, 2011 | MagLite 4 Cell C Flashlight Black

1 Answer

I have a stream light flashlight that will not charge. When I put it in the charger the red light on the charger will not stay on. Will blink on and of a little if I move the light around a bit. Do I need...


Sounds to me more like a connection issue at the charger due to the fact that it comes onn as you move it. However if you move it and it comes on for a second, then you move it again and it does the same thing, you are just making and breaking a connection making the charger start over, then it senses a bad battery and quits. If the battery is old it could well be that. Also look at the connection points on the flashlight and charger they should be nice and clean. A pencil eraser works great for cleaning them.

Jun 11, 2011 | Stinger Streamlight 75000

1 Answer

Put in new known good bulb didnt work. replaced battery with known good battery didnt work. is it a bad switch. the switch seems to work perfectly.


Look at the inner spring it gets caked with corrosion, I am trying to find out how to disassemble the whole thing. Thats all I know.

Jun 10, 2011 | Stinger Streamlight Poly with 110V ACDC

2 Answers

Looking for a 120V to 12V charger for a Professional"s Favorite 17.5 million cp spotlight.


You should be able to use any AC adaptor that puts out a 12 volt DC current and has correct polarity. Based on the estimated size of the battery powering your spotlight, you probably will want a charger that provides at least 1000 mA of power--the charger that came with my ThorX 10 million cp spotlight puts out 1500 mA to charge the two batteries in that light. A lower amperage rating will increase the amount of time it takes to charge your light, but it should still work.
You can find a replacement charger at Radio Shack, which sells chargers that can be fitted with a variety of different tips. However, you might be able to find a cheaper universal charger with a tip that works at a discount store like a Walmart, or you might get lucky at a thrift shop or second-hand store and find a 12v charger that will work with your light. 12 volts is a common output for a lot of different devices, so it shouldn't be hard to track a replacement down. Just make sure you have the adaptor tip polarity correct, or else you could make your battery explode if you try to charge it with reversed poles.

May 25, 2011 | Flashlights & Headlamps

1 Answer

Put new batteries in it,turned it on and still wont work,you think it might be the bulb


Before replace the bulb, check for rust or dirt inside the electrical contacts. clean it. if still wont work, replace the bulb.

sammyc47

Feb 22, 2011 | MagLite 4 Cell C Flashlight Black

1 Answer

Tried to change bulb but now wont work


Insure the batteries are working correct and in the proper direction. Also double check the bulb to isure it was not damaged and put in correctly. If it was working before new bulb inst. try a new bulb

Jul 30, 2009 | Mag Instrument AAA Mini Maglite...

1 Answer

My Mini mag AA worked until I took it apart to install an LED kit


Start with a new mini-mag and put the upgrade in it. It will save you the frustration, especially not knowing for sure whether their is a missing part or not. Plus it will save the hassle.



GGBMDB

Nov 15, 2008 | MagLite Flashlights & Headlamps

Not finding what you are looking for?
Flashlights & Headlamps Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Flashlights & Headlamps Experts

Carl Glas
Carl Glas

Level 2 Expert

283 Answers

marrazzo

Level 1 Expert

11 Answers

Iron
Iron

Level 3 Expert

3018 Answers

Are you a Flashlight and Headlamp Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...