Question about Compaq Deskpro EP PIII-650MHz/ 128MB/ 10GB/CDROM/ FDD/ ENET/ Keyboard/ Mouse/ WIN98COA/ No OS - (CODEEPPI1210) PC Desktop

1 Answer

Code 10 on dvd rw drive - Compaq Deskpro EP PIII-650MHz/ 128MB/ 10GB/CDROM/ FDD/ ENET/ Keyboard/ Mouse/ WIN98COA/ No OS - (CODEEPPI1210) PC Desktop

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 97 Answers

This has been a common windows issue. I'm sure that this will solve your problem. You can go to this link, http://tinyurl.com/toshibadvd, download the registry file and run it. After that, just restart your computer and it should be good to go.

If you're not sure and is worried about security since this is messing with the registry, you can just click on this microsoft link where it explains and gives you detailed instructions on how to manually edit the registry and fix the problem. http://support.microsoft.com/kb/929461.

This is typically the same thing, the first one is just a shortcut on how to do it. Just a reminder, EDIT THE REGISTRY AT YOUR OWN RISK!!!

Posted on Sep 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dvd+rw nd-2100ad no disk in drive error


Can you see DVD-RW drives indicator busy when you insert that disk for a long time? if so, your drive may not going to read that disk. If it is in case of CD disk, sometimes DVD-RW just can't read it while very old CD-ROM can read! If this happens in case of other CD/DVD witch is readable by other DVD-RW, You may just try to clean the lens of your drive.

Jun 29, 2012 | HP Pavilion a620n (PC028A) PC Desktop

1 Answer

Dear FixYa ADDENDUM: 3/6/10  RE: NEC


Try this link below. This will help. Also get ASPI at link below that too can help. have you installed NERO? OR Clone DVD or UltraISO, install those anyway. http://en.kioskea.net/faq/1640-aspi-drivers-for-player-cd-dvd-burning
support.microsoft.com/kb/324129 -
http://club.myce.com/f61/troubleshooting-microsoft-knowledge-base-mskb-articles-related-optical-drives-52565/

Mar 06, 2010 | Dell Vostro 200 PC Desktop

2 Answers

HL-DT-ST DVD +-RW GSA-H21N ATA Device is not working gives a code 10....tried for new drivers was all updated..tried to uninstall and reboot then reinstall nada. This is a acer comp.


Right click on “Computer” or “My Computer” in XP. Select Manage and then on the right side select device manager. On the left if you see a yellow exclamation mark next to your drive and were getting any of the above error codes then we have a simple fix.
Go ahead and right click on the CD or DVD drive that has a yellow exclamation mark next to it and select delete or remove.

try to search:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}

Now that you are at the {4D36E965-E325-11CE-BFC1-08002BE10318} Folder on the right side you will see several entries. right Click and delete the Upperfilters and Lowerfilters. These will be remade once you reboot.

This will try to look for the drivers again..



Jul 12, 2009 | Acer PC Desktops

1 Answer

Optiarc DVD RW AD-7561A This device cannot start. (Code 10)


http://cr.am/framed.php?url=http%3A%2F%2Fh10025.www1.hp.com%2Fewfrf%2Fwc%2Fdocument%3Fdocname%3Dc00817052%26lc%3Den%26cc%3Dus%26dlc%3Den%26product%3D3752864%26os%3D2093%26lang%3Den&ref=driverguide

Go to this incredibly long link (sorry about that) and look though the solutions there, it says it is for hp and sony computers but it has the same principal for all dvd/cd drives

I hope this helps

Dec 19, 2008 | eMachines T5274 Desktop PC

1 Answer

Hp invent p dvd940i does not see dvd disk


1. check your system meets the requirements for your device:
• Minimum system requirements: 800 MHz Intel® Pentium® III
processor or equivalent, 1.6 GHz Intel® Pentium® IV processor or
equivalent recommended (Actual drive performance depends on PC
configuration)
• 128 MB RAM (256 MB RAM recommended for video editing)
• 1024 x 768 video resolution with a minimum of 16-bit color required
for DVD authoring and editing
• Video capture: IEEE 1394 interface or analog video capture device
required
• Minimum hard disk space requirements: 1 GB free for included
software installation, 10 GB free for DVD video disc creation (18 GB
free for double layer). Internet connectivity recommended for software
updates
• Operating system compatibility: Microsoft Windows XP/2000
Professional SP4, Windows XP Professional x64 edition, and
Windows Server 2003
2. Have you install the sowftware that came with your device?
3. is your system recognizing the hard drive (go to start>run>type devmgmt.msc and press enter> and look under cd/dvd rom drives... is your device listed? is it showing with a ? unknown device or a ! next to it's name?
a. if the device is not listed chances are you didn't set up the jumper correcly when installing the device or the device may not be powered or there's an issue with the data cable connectd to the device and the motherboard, check your physical setup.
4. check the removable media is in fact compatible with your drive: this is the compatibility list
• Device write media compatibility: CD-R, CD-RW, DVD+R, DVD+R DL,
DVD+RW, DVD-R, DVD-R DL, DVD-RW, LightScribe CD-R,
LightScribe DVD+R, LightScribe DVD-R, 4.7 GB single-sided/9.4 GB
double-sided DVD-RAM (2.6 GB single-sided/5.2 GB double-sided
media not supported)
• Device read media compatibility: DVD-ROM, DVD+R, DVD+R DL,
DVD+RW, DVD-R, DVD-R DL, DVD-RW, DVD-Video, 4.7 GB
single-sided/9.4 GB double-sided DVD-RAM (2.6 GB
single-sided/5.2 GB double-sided media not supported), CD-R,
CD-RW, CD-DA, CD Extra, CD-ROM (Mode 1 - Yellow Book),
CD-ROM/XA & CD-I Ready (Mode 2/Form 2 – Green Book),
Photo-CD (single and multi-session), VCD, CD-Text

data taken from http://h20426.www2.hp.com/product/opticaldevices/sg/en/pdf/dvd940i_dataSheet.pdf

Sep 28, 2008 | HP PC Desktops

1 Answer

Writing a cd


your cdrw drives has defects RWxxx-x Error codes Error code Description RW529-1 ATAPI CD-RW Drive RW529-2 SCSI CD-RW / DVD-RW Drive VCxxx-x Error codes Error code Description VC316-1 Video Memory VC316-2 Video Pages VC316-3 VGA Controller Registers VC316-4 VGA Color-DAC Registers VC316-5 VESA Full Video Memory Test

Aug 28, 2008 | PC Desktops

2 Answers

Matshitu uj-850s driver is not working on my laptop. Itis at a code 10


hi there,
do u mean drive ??? cause this CD-RW/DVD-RW COMBO Drive would not need a driver since windows would install it set of generic drivers for this drive.... but here is a little file that would help u out:-
Download this registry fix for missing/not working CD drives: http://aumha.org/downloads/cdgone.zip

How to Fix a Code 10 Error
A Code 10 error is due to:
  • Missing device driver
  • Malfunctioning device driver
  • Incomplete device driver files
If the device due to which the error has occurred contains the value FailReasonString in its hardware key.

then this string is displayed as an error message. Otherwise, the device displays the following error message:
This device is either not present, not working properly, or does not have all the drivers installed. (Code 10)

Most of the time, you can resolve this error by updating the device driver for the faulty device. To update the driver, select the System option from the Control Panel. In the System Properties dialog box, select the Hardware tab, and then select the Device Manager button. Scroll through the Device Manager window and identify the faulty hardware device. Right-click on this device and then select the Update Driver command. Next, follow the screen instructions to update the driver of the selected device.

Apr 12, 2008 | Compaq Deskpro EP PIII-650MHz/ 128MB/...

2 Answers

Software Problem burning CDs


during this period, did you have anti virus turned off?

Jun 02, 2007 | Sony VAIO Digital Studio PCV-RS430G PC...

Not finding what you are looking for?
Compaq Deskpro EP PIII-650MHz/ 128MB/ 10GB/CDROM/ FDD/ ENET/ Keyboard/ Mouse/ WIN98COA/ No OS - (CODEEPPI1210) PC Desktop Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Compaq PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Compaq PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...