Question about Televison & Video

2 Answers

Troubleshooting of my PC cam

How can i used my PC cam for picture. I have a mistake, I've deleted the program for it. What should I do, in order to back the previous settings.. Please help me.. Thanks..

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Where i find the driver of this webcam fm110

Posted on Feb 17, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 304 Answers

If you have the disk simply reinstall the software and drivers. If you do not have the disk give me the exact make and model and I will post a link that will route you directly to the software you will need to reinstall the drivers. I will also need to know what operation system you are using to insure I direct you to the proper version for your system. If you don't have the disk, Post the make, model number, and operating system you are using here and I will get the software you need. Hope you find this useful. Do not rate this until I have fixed your problem. Any questions feel free to ask me.

Posted on Jul 25, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Retrieve deleted video files

How about some more info. Is it a Hard Drive,SSD, did you use the delete function on the device or an add on app(program) for deletion.

Oct 30, 2013 | Hauppauge Televison & Video

1 Answer

I have a Philips Magnavox Dynamic Bass Boost - Bass Reflex Speaker System Ultrabass Model AZ2000/17 120V 60hz 22w Serial No: KTO19932125642 I purchased it some years ago. I can't find the cord...

you could get this on Ebay if you dont have an account you will need to create one
Add Email adress
Add Bank Acc
Add Credit Card
also add your postal adress
also add a paypal account
when you get to the paypal login page at the bottom you will see new to paypal sign up tab
paypal to create an account
paypal registration password ,bank card /credit card,phone numbers home/mobile ,email adress and a postal adress
be very specific when you type in the search
always ask questions? before you make a purchase and keep the email/s for security reasons if the item arrives and its not as described
you will even see the pictures of your item so you cant make a mistake and get them home delivered
hope this helps

Jul 05, 2011 | Philips SAA7130 TV Tuner/FM Radio/Video...

1 Answer

Format hard disk now asus tvfm card wont work xp

Hi, Thanks for using fixya.

I am going to assume you can't see any pictures.

Search google for Video Encoders and Directx. You might also need a program for viewing, personally I use cam wiz It's not free and I don't advertize.


Feb 17, 2011 | ASUS TV/FM 7135 (TVFM7135WREMOTE) Video...

1 Answer

Adobe Acrobat has taken over my system, & i cant open do i fix this problem...much thanks

Hi, cfreeman90

Note that this answer assumes you are using a PC. Try using the task manager to close Acrobat. To do so, hold down the Ctrl and Alt keys and then push the Delete key. The task manager window should open and Adobe Acrobat should be on the list of running programs. Click on it and then click on the "end task" button below the text box witht the list of programs. If Acrobat still won't stop, give it a few minutes, then click on the process tab which will switch to a list of running processes, and end any process with Adobe or Acrobat in the title. This may cause your computer to restart, though. Once its off, I would recomend that you uninstal the program.

If you don't already know how to uninstal a program, here it is. click on start and click on "control panel" on the start menu. When the control panel window opens, click on "add and remove programs". This will open a new window with a list of programs installed on your computer. On the list, click on adobe acrobat. There should be a button marked remove. Click it and click on yes when the next widow to open asks if you want to remove the program.

Jan 17, 2011 | Lanier UNKNOWN

2 Answers

I forgot the password of my mini 400 portable card reader. How can i reset it?

As you can not fire the SW for it, you can not configure it The only way is to go to Control Panel->Add Remove Programs. Select this device and delete it or uninstall it. Reboot the PC/laptop. Now insert the CD that came with it and let the drivers be installed again. Once done reboot the PC/laptop. Now connect the device and allow Windows sufficient time to detect the device and load its drivers. And when you get a message in the right bottom corner that "Your new HW is installed and ready for use" run its program and re-configure its settings. And this time have a password that you can remember otherwise you may be doing this exercise very often.

Dec 02, 2009 | Unitech MSR 206-33 (msr206-33) Magnetic...

1 Answer

Do any1 know is it possible to use 2 Geovision Gv 800 in one PC?

yes you can, but recording will depend on size of hard drive. i work in the trade and you will require at least a terra bit to run 32 cams for any given period

May 07, 2009 | Geovision GV-800-16 Video Capture

1 Answer


Manually Uninstalling Startup Control Panel Startup Control Panel is supposed to appear in Add/Remove Programs so that you can uninstall it easily. Unfortunately, at some point several years ago, something changed in Windows such that this entry is not created properly on new installations. Sorry about this. Here are detailed instructions for uninstalling the program manually.
Step 1. Close Startup Control Panel If Startup Control Panel itself is open, close it by pressing the X in the upper-right corner of the window.
Step 2. Close Control Panel If the Control Panel window, where you access the icons for all the different control panels (Display, Fonts, Sound, etc.), is open, close it by pressing the X in the upper-right corner of the window.
Step 3. Delete program file Delete the following files, if they exist. Only one of them should exist.
  • C:\Windows\System32\Startup.cpl
  • C:\Windows\System\Startup.cpl
Detailed instructions for step 3:
Navigate in Windows Explorer to the directory C:\Windows\System32 . Click away any warning messages until you see a long list of hundreds of files. Find the file named either "Startup" or "Startup.cpl". Delete the file by right-clicking on it and selecting "Delete" from the menu that pops up. Confirm the deletion and then verify that SCP has been removed. Do not delete any other files or directories: doing so can damage your operating system.
If you can't find the file in that folder, also look in C:\Windows\System . If you get an error message saying that the file is in use, verify that SCP and Control Panel are closed; if so, try restarting your computer and deleting the file as soon as the computer starts up again.
Step 4. Delete registry entries (optional) I do not recommend performing this step. It is only for advanced users who want to expunge every last trace of Startup Control Panel from their system. If you do not perform this step, a little bit of information stored by SCP will remain in your system registry. This information will not affect or slow down your system in any way if it is allowed to remain. Removing this information requires using the Registry Editor, which, if improperly used, can seriously damage your software and operating system. Proceed at your own risk!
Start the Registry Editor (regedit.exe) and delete the following keys and all their subkeys, if they exist:
  • HKEY_CURRENT_USER\Software\mlin\StartupCPL
  • HKEY_LOCAL_MACHINE\Software\mlin\StartupCPL
Hope this may help you;


Sep 04, 2008 | Pinnacle Dazzle Video Creator Platinum...

1 Answer

Down loading pictures

i think you are trying to transfer photos from your cellphone to your pc... well you need a bluetooth dongle not a flash drive in order for you to transfer files from phone to pc.

Feb 11, 2008 | Televison & Video

2 Answers


I have found a troubleshooting link for you. Ensure you Video card Drivers are the Most up to date, ya have latest version DirectX Also, try installing another application to watch TV. There is a TV program called Dscaler that may work it's Driver free, well uses it's Own... great program ....another Kastor TV, & Amcap. Ensure ya go to the manufacturers web site and download the latest drivers for your USB TV and install them... Once ya Video card & USB etc Drivers are all installed, reboot after each install, insert ya USB TV device, follow any instruction regarding a Driver, simply point it to the driver files if asked... and proceed to try ya TV software.

Aug 22, 2007 | Teac USB2 TV TUNER (USB2TVTUNER) Video...

2 Answers

Uninstalling Geovision ocxchecker.ocx

The best way to uninstall is to go to the following folder "C:\Windows\Downloaded Program Files" and delete the files from there. Make sure that you have all Internet Explorer windows closed.

Aug 19, 2006 | Geovision GV-650 BNC (GV6504) Video...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71172 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers


Level 3 Expert

66616 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides