Question about Jazz DV-179 Digital Camera

2 Answers

I cant recharge my battery

I juss got the cam it was running well until the battery died and i had to charge i plugged in the usb cord, the light blinks red twice then stays solid. . . and still the camera wont turn on

Posted by on

  • 8 more comments 
  • Anonymous Aug 04, 2008

    The light stays red when I plug it in. I can't get it to work after that.

  • northbaycynd Aug 15, 2008

    I am having the same problem. It has been charging for 12 hrs red light is solid and when unplugged from usb it won't turn on

  • daniel_young Aug 22, 2008

    I have the same problem with my Jazz HDV-178. I charged it the red light came on but it will not turn on.

  • benroach14 Sep 09, 2008

    It worked fine until the battery died. Now it won't turn on at all. Not even when its plugged in. HELP

  • slsauve Sep 13, 2008

    I can't charge mine because the charger was lost, apparently you plug it into the usb port and then into the wall. Do you know where I can buy a new charger for my Jazz DV179

  • s-lduguay Sep 14, 2008

    My camera was working fine then it just died. We charged it all night and nothing.It won't even turn on.

  • reg-i Oct 03, 2008

    My camera wont turn on with it even plug in

  • girouette Oct 08, 2008

    i just got the cam it was running well until the battery died and i had to charge i plugged in the usb cord, the light blinks red twice then stays solid. . . and still the camera wont turn on



    What I do now???

  • Anonymous Oct 09, 2008

    I have the same problem,battery won't charge anymore at first I thought it was the battery so I bought another,but same occured, does anyone have a solution ?

  • reg-i May 11, 2010

    wont turn on problem with battery I think

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I just bought the cam can you tell me how long it takes to charge the battery . i have had it on charge overnight and i stiil have a red light the cam works when it is pluggedn in but as soon as i unplug it nothing works. the reading on the camera is saying that the battery is full

Posted on Jul 30, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the Jazz DV179 and have the same problem, there was nos no a/c jack when we had purchased it and now it is died and will not charge, I have even tried to charge through the computer and still it is not charging, does anyone have any idea on how to charge this:?

Posted on Oct 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My panasonic Hc-v100 camcorder is not charging when plugged in to USB cable - cursor light is not flashing and battery is running down


you DON'T charge the camcorder with the usb cord,you only move files between cam and computer,you need a power cord that plugs into the wall,see pic, LETO 2A AC Power Charger Adapter USB Cord For Panasonic HC V100 HC V500 HC...
ihave the same camcorder,
25604055-qex3gwmopjoihxg4lmacgi3y-4-0.jpg

Mar 24, 2015 | Video Cameras

1 Answer

My philips gogear vibe wont turn on


Reset your GoGear with something sharp like the tip of a pen or the end of a paper clip,

if you're device isn't working properly or there's a frozen display.


Insert the sharp object into the "Reset" hole (located at the bottom of the player), and hold it there until the device turns off.


If resetting the device does nothing to restore the display, access the "Philips Device Manager" through your computer to recover the GoGear.


Click "Start" on your computer, then "Programs," "Philips Digital Audio Player," "Aria Device Manager," and then "Philips Device Manager."


This will launch the "Philips Device Manager." Make sure the GoGear is turned off completely. Connect your GoGear to your computer while holding down the "Volume Up" button.


Continue to hold the "Volume Up" button on your GoGear, until the "Philips Device Manager" recognizes the device and enters recovery mode.


Click the "Repair" button when it appears on your computer, then folow the steps to fully recover the GoGear.


Properly disconnect your GoGear from your computer and restart the device.


Recharge your device if your GoGear dies suddenly while playing.

Connect the GoGear to your computer via the supplied USB cord.


Plug one end of the USB cord into a functional, open USB port on your computer. Plug the free, smaller end of the USB cord firmly into the small USB jack on your GoGear and turn your computer on.

This will begin the charging process of your GoGear.


If recharging doesn't work, the battery may need to be replaced.

Check that your GoGear isn't in standby mode. Hold the "Power" button for two seconds to turn it back on.


hope this helps





Oct 07, 2012 | Philips GoGear ViBE SA1VBE08K MP3 Player

1 Answer

I have 6520. when i plug it into a wall jack i does not charge and does not show power from the wall jack any more. this means when the battery is out it will not work any more. please help


Model 6520: If the green light no longer illuminates when you plug it in, you have waited too long to address the battery problem and the circuit board is now damaged. Replacing the batteries alone will not help as it will still not be able to recharge. To repair, you will need a new circuit board but Braun has discontinued for this model. You will be lucky to find one at this date.

model 5520, 5525, 5550, 6520, 6525 and 6550 are all prone to this problem when you neglect batteries that no longer charge correctly. It is suggested that batteries be changed early on when you notice that they are a problem instead of running your shaver from the cord until it dies.

Aug 12, 2011 | Braun Health & Beauty

1 Answer

I was charging my media player and now it is stuck in charge mode?


Hi,Reset your GoGear with something sharp like the tip of a pen or the end of a paper clip, if you're device isn't working properly or there's a frozen display. Insert the sharp object into the "Reset" hole (located at the bottom of the player), and hold it there until the device turns off. If resetting the device does nothing to restore the display, access the "Philips Device Manager" through your computer to recover the GoGear.


Click "Start" on your computer, then "Programs," "Philips Digital Audio Player," "Aria Device Manager," and then "Philips Device Manager." This will launch the "Philips Device Manager." Make sure the GoGear is turned off completely. Connect your GoGear to your computer while holding down the "Volume Up" button. Continue to hold the "Volume Up" button on your GoGear, until the "Philips Device Manager" recognizes the device and enters recovery mode. Click the "Repair" button when it appears on your computer, then follow the steps to fully recover the GoGear. Properly disconnect your GoGear from your computer and restart the device.


Recharge your device if your GoGear dies suddenly while playing. Connect the GoGear to your computer via the supplied USB cord. Plug one end of the USB cord into a functional, open USB port on your computer. Plug the free, smaller end of the USB cord firmly into the small USB jack on your GoGear and turn your computer on. This will begin the charging process of your GoGear. If recharging doesn't work, the battery may need to be replaced. Check that your GoGear isn't in standby mode. Hold the "Power" button for two seconds to turn it back on.


Good luck.

Mar 11, 2011 | Philips GoGear ViBE Digital Media Player

1 Answer

MD781 battery wont charge...will run with the power cord plugged in, I replace the battery first thinking that may be the trouble. Still wont charge...it would run for a short while on the battery when...


Hi

Can you please try to leave laptop switched off
plug in laptop and leave until the light on front goes green or at least 2/3 hrs

then unplug power cord
switch on laptop and use it or leave it until it looses all power and switches off

then recharge until green

when battery is fully charged always un plug and use on battery power
until it reaches about 10% before recharging

some people even remove their battery to preserve it if they always use power cord

if this does not sort the problem please come back to us

many thanks

Feb 23, 2011 | Gateway MD7818u Notebook

1 Answer

The light comes on but it dosent charge


your battery is probably worn out, so it will no longer charge-find info about your battery online then buy a new rechargeable battery for your device

Jul 23, 2009 | T-Mobile Sidekick

2 Answers

Charge


You need a separate battery charger for this camera. It does not have a battery charger built into the camera itself and can not be recharged thru any cords connected directly to the camera. The USB cords only transfer the files to the computer, they don't recharge the camera.

Dec 30, 2008 | Sony Cyber-Shot DSC-P50 Digital Camera

2 Answers

PSP CHARGING PROBLEMS


The way to properly break in a lithium Ion battery is to run it dead before you recharge it. Then fully recharge it and run it until it's dead again. Do this about 3-5 times and then the battery is properly broken in. If you charge it before it dies on a new battery you can build what they call a "memory" where the battery thinks it's fully charged however it's only maybe half charged and you will lose alot of life out of your battery. So make sure you properly break it in.

Feb 02, 2008 | Sony PlayStation Portable (PSP) Console

5 Answers

JAzz DV179


Well.. I have to plug in the charger that came with the dv-179. If I use my Phone (motorola usb) charger, or a USB cable (into the computer or a hub), all it does is light up the back red light (and not the front 'self timer' led) and does not charge the camera. So remember, if the back led lights up, you've got the wrong charger!

Jan 25, 2008 | Jazz DV-179 Digital Camera

Not finding what you are looking for?
Jazz DV-179 Digital Camera Logo

Related Topics:

186 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jazz Cameras Experts

kakima

Level 3 Expert

102366 Answers

Corey Fields
Corey Fields

Level 1 Expert

6 Answers

prouddad_1

Level 2 Expert

65 Answers

Are you a Jazz Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...