Question about Baby Gear

Open Question

Need a bed manual

I need a manual for taking apart an ebbe castle bed for moving and reassembly.

Posted by on

  • 1 more comment 
  • benger Jul 25, 2008

    need manual to take apart alta baby tulipano crib

  • Joyce Obrien Aug 14, 2012

    did you ever find the manual? I'm trying to figure out how to put the castle/turret pieces on the bed

  • Joyce Obrien Aug 14, 2012

    Did you find the manual? I'm looking for the instructions on how to put the castle/turrets up.

×

4 Suggested Answers

rowdy45176
  • 2176 Answers

SOURCE: need to where to look at a manual for reassembly

Okay I finally found it. This tool was made by Black and Decker/Dewalt. They have a description online but no online manual. You will need to contact a local branch or repair center and request a parts explosion for this tool. When calling make sure that you have you exact model number available. If you have any trouble finding a center or factory branch contact me and I will locate one nearest to your location. Good luck and sorry I couldn't help with online schematics.

Posted on Jan 01, 2009

  • 1137 Answers

SOURCE: trying to reassemble rear wheel gear assembly for

This should help you:http://sheldonbrown.com/gearing/index.html. Also try here:http://www.parktool.com/repair/byregion.asp?catid=4 Hope these sites help. Good explanations and pictures.

Posted on Aug 29, 2009

Testimonial: "Thankyou, both sites were very helpful. Excellent pictures & directions both. Easy to follow. Another helpful site I found was bicycletutor.com. "

guru_fixya
  • 944 Answers

SOURCE: we moved, and the fairy

Hi,

There is no specific user guide available but
,I can help you with the below site.Here you can match the parts for what purpose and try build your castle.

http://playmodb.org/cgi-bin/showinv.pl?setnum=3019

Contact website:
http://www.playmobil.com/index.html

Click on the country you belong to and register and click on contact us tab and send them a mail to send instructions guide,
They would send you and also about you will receive mails on offers.

post a comment for further assistance.
Thank you for using fixya have a nice day:-)

Posted on Sep 08, 2010

  • 69 Answers

SOURCE: how to assemble rails

Take a look at this pdf. It might help you to reassemble your bed.


http://ebookbrowse.com/bailey-sleigh-bed-12aug2010-chl01-pdf-d295022039


If it doesn't help you should consider contacting the manufacturer.

Posted on Oct 02, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need instructions for taking apart a Simmons baby bed. Cannot locate model number. Bed purchased in 1985.


sorry but without seeing it , I would only guess to remove any bolt /screws you see.

Jun 24, 2016 | Baby Gear

1 Answer

Need to switch from crib to toddler bed, lost the manual in the move. Help please!!!!!


I just posted the answer to this... please search for "simplicity Ellis 4-in-1" crib into toddler bed.

Nov 08, 2009 | Simplicity for Children 4 in 1 Ellis Honey...

1 Answer

How do I lower the mattress on my Bonavita crib quickly?


Most cribs have tabs on the rails of them .... take everything out .. bedding,mattress,etc. Take a look at the platform that the mattress lays in especially the corners.... You might see a hook at each corner that fits into a release tab unlock the realease tab and remove the hook. Do this for each side and reinsert the hooks at the correct level in the crib... If this is not the case you may need to look at the owners manual... But I think you should be able to get a good idea about how it lowers when you remove all the bedding out of the crib..... good luck

Oct 19, 2009 | Bonavita Peyton Crib

1 Answer

I need directions on how to change the crib into


Usually all you do is take the sliding side off and you usually have to order a new side bar for the head of the bed. At least that was what was needed for my crib.

May 28, 2009 | Simplicity for Children Ellis 4 in 1 Sleep...

6 Answers

Mamas and Papas Murano cot bed problem


fully dismatle the cot, keep all the bits.. Take the two slatted sides to bits and put the base pieces of wood from these to one side.
pull the headboard and footboard (is that whats its called) apart take the feet from the footboard and add to the headboard (they are now the sole head and foot boards) screw the 4 nuts with blanking plates to the top 4 holes on the new head and footboards
take the two long slatted size bases and screw them to the lower holes on the head and footboard put the base brackets (L shapped screws) into the corners put the cot base onto the L shaped screws done

May 18, 2009 | Baby Gear

1 Answer

I lost my instrction manual!


Step 1: Detach the front panel from the 2 front post using an allen wrench
Step 2: If the mattress support is not in the lowest position unscrew the bolts and move it to the lowest position
Step 3: Using the allen wrench, attach the guard rail using 4 bolts between the lest and right front post (the guard rail would be that extra piece that you couldn't do anything with while the bed was converted to a crib. Looks kinda like a wooden board)
Step 4: Tighten all screws and put the crib mattress back in

Apr 30, 2009 | Baby Gear

1 Answer

Cosatto Hogarth cot bed manual


hi - if you email enquiry@cosatto.com I will send you the manual.

kind regards
Eileen Smith
Cosatto

Nov 01, 2008 | Cosatto Baby Gear

1 Answer

Simplicity Ellis 4 n 1 crib


I thought I lost it too. But under the mattress on the bed frame (Metal part) it was attached to a bag there. I searched hi & low for this manual till I took the bed apart and there it was. 

Aug 07, 2008 | Simplicity Baby Gear

6 Answers

Missing manuel


contact the manufacture at this site
http://www.bonavita-cribs.com/contact.html
is has links for customer service which can get you manuals and parts

Apr 05, 2008 | Bonavita Ellie

1 Answer

Converting to a toddler bed


That's all there is to it. I also took the wheels off so it wouldn't move quite as easily. And, also because my child was tiny for her age and that removed another few inches she had to climb up into the bed.

May 22, 2007 | Kinderkraft Vermont Crib

Not finding what you are looking for?
Baby Gear Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Baby Gear Experts

Jennifer Rock
Jennifer Rock

Level 2 Expert

105 Answers

yadayada
yadayada

Level 3 Expert

66563 Answers

kakima

Level 3 Expert

100340 Answers

Are you a Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...