Question about Husqvarna Designer I

1 Answer

Bobbin won't wind

When I engage the bobbin winding and step on the petal, it doesn't start winding. The machine works fine when the bobbin winding is not engaged.

Posted by on

  • jewelbud Jul 26, 2008

    Well thanks for the suggestion. It still won't start. This is a designer I and the books says no oil, oops, I put a drop in.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Husqvarna Expert
  • 371 Answers

The bobbin rewind unit needs to be inspected. In order to do that the covers have to be removed. It could be the wiring to the board may be disconnected or the rewind unit is just broken and needs to be replaced. You might want to take it to an authorized husqvarna viking dealer for service. You can locate a dealer near you by visiting the husqvarna viking website and clicking on the Dealer link on the left-hand side of the page - http://www.husqvarnaviking.com
Good luck.

Posted on Feb 13, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bobbin winder is engaged and shows up on screen correctly, but sewing mode is still engaged and bobbin winding keeps stopping.


check the drive knob on the end of the machine
it should be loose when winding a bobbin
if it is tight or seized then that will drive the needle

Sep 20, 2015 | Janome Sewing Machines

1 Answer

Bobbin won't wind and display shows me in bobbin wind mode and won't turn off, so i can't use the machine at all


it sounds like it's a problem with the computer motherboard and the
machine needs to be checked

Dec 04, 2012 | Sewing Machines

1 Answer

Loose boobin winding


You need to ensure that the thread is going from the thread spool at the back of the machine, through the eyelet, then around the silver tension disc on top of the machine, then to the bobbin when you are winding it. Also, pull the thread tail up through the hole in your bobbin to start and hold the tail so the thread starts to fill smoothly and doesn't loosen.

I've marked the disc in red on this image
1_4_2012_7_18_26_am.jpg
Please read my Tip on bobbin winding; its really important to get a good wind and you can add more tension yourself by applying gentle pressure to your thread spool on the back pin as you wind off it.
Link is http://www.fixya.com/support/r10598580-winding_bobbin_correctly

The stopping when full is possibly because your bobbin is winding unevenly but I never run it until it stops itself anyway, and do the winding at 3/4 speed, not flat out. You want a really smoothly tensioned even wind onto the bobbin so your thread comes off the bobbin when stitching with even tension, not stretched, then loose.

Hope this helps you with your problem.

Dec 14, 2011 | Elna Quilter's Dream 6003Q

1 Answer

My elna sewing machine bobbin won't spin on top to wind thread around. The fly wheel spins though...I've been putting thread on the bobbins by hand.


If the fly wheel is going around then the clutch isn't disengaged to wind the bobbin, you need to pull out the flywheel on your model to disengage the clutch for bobbin winding.

tally_girl_59.jpg
Take thread from thread spool across to bobbin winder thread guide, then back to bobbin and thread the tail through the hole on top of the bobbin. Place bobbin onto spindle on top of machine and then push it against the stop to engage the bobbin winding motor. HOld the thread tail up and start winding slowly until the bobbin core has been covered including the starting point. Stop and trim off the thread tail with scissors. COntinue winding bobbin and give the thread a nudge if needed to wind evening top middle and bottom of the bobbin. A good smooth wind is important. Also don't wind at full speed and keep an eye on the thread reel that the thread is coming off, you don't want it bouncing around as this will **** the thread and stretch then relax it affecting your bobbin wind.

Obviously if you know this and the bobbin winding mechanisim is just not working, then it will need a service/replacement by an Elna repair person.

Aug 01, 2011 | Elna 2007 Mechanical Sewing Machine

1 Answer

Myfriend has a Juki tl 98 Q on a frame. hooked up to the gracey sure stitch regulator. How do I wind a bobbin without having to unhook everything and put the foot foot petal on to wind a bobbin?


Simpliest solution is to buy a stand alone bobbin winder so you can wind them anytime. You can get one from http://www.sewingpartsonline.com/universal-automatic-bobbin-winder.aspx .

Otherwise you would need to wind enough bobbins before you start a project on the frame I guess.

Mar 13, 2011 | Juki TL-98Q

1 Answer

Bobbin won't wind correctly!!


Iam very picky about my bobbins!

make sure you are threading the machine for the bobbin correctly, In my opinion I don't think any machine really winds well.

What I do is hold the thread about an 1" away from the bobbin. start to wind and I guide the thread slowly up and down the bobbin so that it winds even

Aug 28, 2009 | White Sewing 2200 Multi-Tasker

1 Answer

Euro pro model 9110 winding the bobbin


The engaging letter is the gadget where you place the bobbin. By pushing it to the right the machine disables the rest of the machine temporarily while you wind the bobbin.

Oct 11, 2008 | Sewing Machines

1 Answer

Bobbin winding not working on Kenmore 385.15243/15343


Have you tried tightening the bobbin screw?

Sep 04, 2008 | Kenmore Sewing Machines

5 Answers

Can't wind the bobbin


Bobbin will not lock on bobbin spindle, what can I do?

Mar 20, 2008 | Brother CS-8150 Computerized Sewing...

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Sewing Machines Experts

Douglas Plant
Douglas Plant

Level 2 Expert

165 Answers

Derek Massey

Level 2 Expert

92 Answers

Natasha Subko

Level 1 Expert

64 Answers

Are you a Husqvarna Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...