Question about DeLonghi Air Conditioners

1 Answer

I just purchased a CT90/CT110 air conditioner and I have windows that open with a crank handle outwards from window sills not up and down or side to side how do I install the vent hose? tks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

You have to custom make a bracket that fits on the inside of your window(like a bug screen bracket)
Cut a hole in the centre or side & put the hose through. Bingo!

Posted on Sep 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Water draining from underneath the unit on and down the window on the outside. This is running down the wood of the sill. There is also a great amount of it collecting in the pan, almost to over spill...


most window units use the water in pan and throw it upon condenser which evaporates it. need to check if its level side to side with a slight tilt to the back in window.

Aug 12, 2014 | Friedrich QuietMaster Deluxe RS12L10 Air...

1 Answer

House windows icing up indoors


If your house doesnt have a roof ridge cap vent in the center all the way across the house then moisture will stay on the window pane and sill and cause mold and rott.

Jan 01, 2014 | Air Conditioners

1 Answer

PAC CT-90 Air conditioner My CT90 is leaking


When you air condition, you essentially remove heat from the "inside air" and transfer it to the "outside air". from a google search this thing is sort of like a window air conditioner, but the hot air is sent outside via a vent hose, so the unit can be located away from the window. Any time you cool air, it holds less water, so depending on the humidity, there will be condensate formed, the question is, how is it dealt with. In window air conditioners, you see it dripping from the back side when it is running. For your unit, is it unclear how the condensate is being removed; maybe hot air going outside is directed across where the condensate collects and it is assumed it will evaporate and be vented outside as vapor? First, check and see if the unit is still under warrantee, if so, contact them and see how to get it fixed (if you mess with it, it might void the warrantee). If it has expired or the company is out of business, etc, you can try opening it up and see what is going on. The water collects under the evaporator (the fins where cold air comes out). Underneath there should be some kind of tray or something that collects the condensate and directs it somewhere in the unit for it to be gotten rid of. I'm thinking something is cracked, leaking or come loose, letting the water escape and run out. If that is the case, you might be able to use silicone seal or something like it to seal the leak. Hopefully, it is something simple like that.

Sep 13, 2013 | Air Conditioners

1 Answer

Sill supports for window air conditioner...no sills


ok do not worry...every unit comes with outside supports that allow you to tilt the uinit to the outside a little so the water discharge can leake outside and not inside your house...one support go in eachside under th eunit one side connect to the wall and the other side connect to the bottom of the unit...
the whole is need on the side you are going to let the water out...the unis discharge lots of water and need a way out and the hole is for that make suer it is on the back close to the corner and far away from any moving part.(I usually find a place under the fan that is if they do not have one pre-driled

Sep 07, 2009 | Air Conditioners

1 Answer

How do we get rid of the water that collects in


There is no container, it burns it up inside into hot air and sends the moisture out the exhaust tube which you hooked up to the back of the unit and ran either outside or underneath house through flooring. There is one of these units that does come with a bucket in the front bottom drawer that comes out, but if its a PAC ct90 just like mine, there is no water empty it handles all that itself.

Aug 04, 2009 | DeLonghi PAC T110P Portable Air...

1 Answer

Whirlpool Air Con Drainage issue


Yes, there should be a place for the condensate to drain outside. It's apparently clogged and the drip pan is overfilling. Look for a tube or an opening outside where the condensate should be exiting. This needs to be unclogged.

May 31, 2009 | Whirlpool Electronic Window Air...

1 Answer

Through the wall vs. window installation


window mount doesn't have to extend out on the back to clear the side /top intake vents because a window is about 2" thick,
but a wall mount has to have about 6 to 8 " clearing before the intakes vents can be exposed. you can't have your intakes buried in the wall.
in short if you see about 8 " of dead metal in the center area (just behind the window sill) then you can mount it in a wall as it will protrude far enough to clear the side /top intakes.


a sleeve just gives you a way to balance / attach to the outside wall

Jun 12, 2008 | Air Conditioners

1 Answer

Have no outside window sill to support


Purchase an "L" shaped shelf bracket (heavy duty of course) and fasten it to the outside wall under the window. You should be able to now use the support bracket against it. You can even get special plant hangers that will serve the same purpose. I have seen many people do this and it seems to solve the problem!

May 30, 2008 | Kenmore 6000 BTU Single Room Air...

1 Answer

Window Air Conditioner Sweats


You need to seal the portion of the air conditioner that is inside the window from the portion that is outside the window, Sweating is caused by moist outside air leaking in and contacting the cold portion of the air conditioner. Do not use duct tape, buy aluminum tape which is what professionals use to seal air leaks on ducts. Home Depot sells the tape. Buy the smallest quantity you can find that will do the job ( it can be expensive ) unless you plan to go into air conditioning duct installation.

For best results use some form of insulation over the accordian like side baffles ( cut to fit) . Styrafoam from packaging or silver backed insulboard (Home Depot). Now tape the sides of the insulation to all sides of the window frame, bottom of the window, the sill, and the air conditioner.

Unless you enjoy doing this every year - plan on this being a permanent installation. It is a tedious job because the aluminum tape is not very forgiving and has a peel off backing but it sticks forever.

May 08, 2008 | Air Conditioners

1 Answer

Installing room airconditioner


what i did was buy a 2x6 cut them all into about 18 inches in length screwed one piece onto the window sill and the other 3 i screwed into that piece going out the window so the a/c unit sits on the wood pieces and clears the window sill that way i dont have to worry about the a/c unit weight on the window it was all on the wood pieces sticking out

Apr 28, 2008 | Air Conditioners

Not finding what you are looking for?
Air Conditioners Logo

Related Topics:

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top DeLonghi Air Conditioners Experts

Michael Youngman
Michael Youngman

Level 2 Expert

156 Answers

Mike

Level 3 Expert

4331 Answers

Michael McQuay
Michael McQuay

Level 2 Expert

111 Answers

Are you a DeLonghi Air Conditioner Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...