Question about Computers & Internet

1 Answer

Broadband link flashing...

Hey my broadband link is supposed to show a green light (along with the local network and power) the problem is that my broadband link flashes orange then goes back to green for a few min then goes backs to orange i tried calling the company but they checked the line and they said it was fine the problem must be at home and i was just wondering wat could those problems be??

P.S i checked all the phones and made sure they were connected properly i rly need ur help cuz this slows the internet so much i hardly use it.

Posted by on

1 Answer

It is something to do with ur phones either the filters are not properly installed or the router itself is gone bad
ideally all equipments should have a filter on it except the router if this has been checked by u
the better get a another router and test if the equip is ok or not

Posted on Jul 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you introduce the version types of broadband network and its realization way?


First is the bearing network and broadband network to points clear, PTN and OTN are bearing network, both them are carrying broadband metropolitan area network (backbone) business. Itself is not broadband network. Broadband access technology at present mainly include: (1) the PON passive optical network, the current is given priority to with GPON, adopts the OLT + optical splitter, ONU + user solution, in the current mainstream broadband technology. (2) the DSLAM before FTTH as the main broadband access technology, is to use the original copper (lines) to realize broadband dial-up access. Is actually using MODEM digital signal modulation into high frequency simulation on copper wire transmission, with MODEM finally demodulation into digital signals.At present, the light into the basic finished copper retreated. (3) using LAN + light cat. (5) abroad and power carrier solution, is to use the high voltage wires at the same time the broadband service. (6) HFC radio and television use before, is the cable upload 50 ohm coaxial cable broadband business. Basic don't now.

Nov 23, 2015 | Computers & Internet

1 Answer

Power light and local network are green but the broadband link is red


check your modem settings also try using the reset button on your modem if possible

Jul 13, 2010 | Dell Computers & Internet

1 Answer

Hi - My 2wire 1701 gateway has steady green power light and steady local network light but the broadband link light is steady amber. My computer is receiving the WiFi signal but I cannot get any internet...


The broadband link light tells you the status of the connection between the modem and the broadband servers in your area. Green means everything is A-Ok while amber means your modem is not picking up a broadband signal.

Try turning the modem off and on and also make sure the cables are secure while you're at it. If the broadband light is still amber, the only thing you could do next is to call your internet service provider.

Oct 01, 2009 | 2wire Computers & Internet

1 Answer

2 wire Router is not working


I had a similar problem when the power went out and the router got hooped, the solution was to UNPLUG the power CONVERTER from the wall and wait ten minutes before plugging it in again.

Dec 09, 2008 | 2wire (1000-400108-001) Router

1 Answer

Broaband link


Ok, thank you for clarifying.

It seems like the settings on the 1707 have been reset.
On this modem, while connected, type "homeportal.2wire.net" without the quotes.
  • click on "Broadband Link"
  • click on "Advanced Settings"
*note:you may have to enter your password. if you never set one and it asks you for one, click on "I still can’t remember the password". Follow the instructions.
  • On the "advanced Settings" page, make sure your settings are correct. The user name is the same you use to check your AT&T Yahoo Email. and also the password.
  • If you have forgotten your settings, you can call AT&T to retreive your settings at 1-877-722-3755. Have your AT&T Bill and the debit/credit card (used to activate your service) on hand.
They should be able to give you your info.
If not, comment back.

Aug 03, 2008 | Computers & Internet

1 Answer

I don't like my local server....can i get total broadband connection from aol?


Hey dlowe0700,

While AOL does offer broadband services, they may not necessarily be available in all areas. For the most up-to-date coverage information, I would strongly suggest giving AOL a call at their toll-free hotline (800-973-1802) or visiting their broadband service website using the link I've provided below.

http://broadband.aol.com/broadband/getting-broadband.adp

Hope this helps you out.

Sincerely,
Aaron
Go Ahead. Use Us.

Jun 23, 2008 | Computers & Internet

1 Answer

2Wire 1701hg gateway- Broadband Access problem


hi! have you used this other identical 2wire modem before? if this other 2wire modem (is it the same 1701hg?) well you may need to configure the settings first. also 1000 series modems usually have 3 lights on it; power, broadband link, and local network. if these 3 lights are on, you may need to access the modem's user interface. assuming that all lights are green, on your computer directly attached to the 2wire, open up any browser, type in gateway.2wire.net. it will give you the network at a glance page. click on run system setup wizard, type in the system password. on the ppp authentication page, please check if it has your username & password (this is the one that you set up on your internet acct w/ your ISP), the next screen will establish a connection. (please tell me if you've got any error messages...)

Apr 06, 2008 | 2wire 2700HG-B Router (2700HGB)

1 Answer

Linksys Wireless-G Broadband Router


If the power light on the router is Blinking very Fast .
Then Reset the router fro 30 sec and then leave the power cable unplug for 1 min .
Then plug the power plug back in and then check ............if the power light stop light stop blinking then the router can be reused or else the router has gone bad

Mar 09, 2008 | Linksys Wireless-G Broadband Router

2 Answers

How to use 1800 HG on a non BT IP


i got all green lights on my route and was working a week ago but for some reason it has stop work. please help

Jan 27, 2008 | 2wire 1800HG Router (RG1800HG00)

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

928 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...