Question about Samsung HLN5065W 50" Rear Projection HDTV-Ready Television

1 Answer

Can you look up the digital board model part i need too?

The model number for my tv is a samsung HLR4667WAX/XAA. the picture just started having a green shadow and some distortion. at first i tried to unplug it and then plug it back in and it worked for a short while. any advice?? samsung customer svc said digital boards run $800!!! geeez
trophft@hotmail.com Thanks!

Posted by on

  • will705 Aug 18, 2008

    Screen is green and has vertical lines running through it.

  • jeffwkingjr Feb 02, 2009

    I have the green noise superimposed over my picture. It's a 2005/6 50" DLP model HLR5067. The tech. says the digital board (BP94-02084A) is bad and Samsung no longer makes the part. I contacted Samsung who is going to do a prorated exchange for a 2008 model. I'm waiting to get the final price but they estimated $300-500. I'd prefer to just get a new board if anywhere knows where to find them.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,284 Answers

BP94-02084A is the digital board part number for your TV

Posted on Aug 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Samsung HLR4667WAX/XAA made a loud popping sound, picture went out and then the sound


Your lamp is burnt definitely (lamp makes that sound ,take lamp out and You will see inside lamp) no sound ,because unit goes to protect mode and shouts down power

Aug 08, 2011 | Samsung - Lamp for Samsung HLR4667WAX/XAA...

1 Answer

Bad picture on a Samsung DPL TV


Failing DMD board or it is also possible it has bad ribbon cables

Jan 31, 2010 | Televison & Video

1 Answer

Samsung Model HLR4667WAX/XAA is making a buzzing sound


It is likely the color wheel motor making noise

Check this link
http://www.jangro.com/electronics/samsung-dlp-replace-color-wheel/

If it helps be sure to vote/rate me Thanks

Oct 06, 2009 | Samsung DLP HL-P5663W 56" TV

2 Answers

Samsung Model HLR4667WAX/XAA is making a buzzing sound


This TV is horrible. I have the same one and not even a year replaced the light bulb twice. Very disappointing for a Samsung.

Sep 21, 2009 | Samsung DLP HL-P5663W 56" TV

2 Answers

I have a Samsung HDTV. Model Code HLR4667WAX/XAA,


IT'S YOUR DMD MODULE IT'S PART OF LIGHT ENGINE IN THIS PATICULAR MODEL WHEN THAT GOES BAD YOU HAVE TO REPLACE WHOLE LIGHT ENGINE CONTACT DISCOUNT MERCHANT OR RIVER VALLEY ELECTRONICS THEY HAVE THEN FOR PRETTY CHEAP.

Jun 24, 2009 | Samsung Televison & Video

1 Answer

46" Samsung DLP Lines & Freeze up


This is a possible fault in the power supply, and can be a problem with some decoupler caps on some of the boards. The vertical bars and unstability are usually attributed to having high frequency noise and or clocking pulses crosstalking on to the power distribution lines that run through the boards. This can be switching power supply noise, or cross-talk from clocking pulses.

Another thing that can cause your described fault is unstable clocking between the devices that are reading and writing to the data busses. There are a number of data busses running through the set for the boards to be able to communicate with each other.

The tech will use the process of board swapping to service the set, and then do the adjustments as necessary to make sure the new boards match up.

Yes... DLP sets are fairly expensive to service!

This is my personal opinion. If the set is out of warranty, I would change for a Plasma or LCD set. If you compare the performance of these to ther DLP, the difference is very big. From what I am seeing from a service point of view, the DLP's are lower in reliability.

Jerry G.


Apr 03, 2008 | Samsung DLP HL-P5663W 56" TV

Not finding what you are looking for?
Samsung HLN5065W 50" Rear Projection HDTV-Ready Television Logo

Related Topics:

453 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72230 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...