Question about Samsung Digimax S730 Digital Camera

1 Answer

Won't Connect to Computer

I installed the driver that came with this camera and the camera worked fine until I went on vacation. When I came back and plugged the camera in, the screen on the camera that usually pops up to prompt me to connect to the computer does not appear. I have already formatted the memory card and this has not helped. It appears as though my camera no longer recognizes when it is connected to a PC. I have tried this on another PC and it doesn't connect to that one, either. Any suggestions?

Posted by on

  • mj_wegrzyn Jul 25, 2008

    yes, i reinstalled the driver, it doesn't work

  • bryannajo Sep 04, 2008

    When i plug my camera into the computer nothing happens. i was going to try and reinstall the software but i lost the cd. ???? whats the problem ????

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 103 Answers

Mj wegrzyn;  have you checked the FAQ at the Samsung website for an updated driver or flash upgrade for your camera. It's always a good idea to check the manufacturers site for any upgrades. If they haven't posted any, try re-installing your driver on your PC again and then plugging in your camera. Hope this helps.

Posted on Jul 24, 2008

  • Harold Bean
    Harold Bean Aug 29, 2008

    My only suggestion is to have it checked by a Samsung authorized repair center. Sounds like one zapped chip on the circuit board. Reason for this answer is the lack of PC connection along with no LCD screen. Hope this helps.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need the drivers for windows 7 for the olympus 1030 sw. In fact, when I connect the camera, it doesn't install automatically, and I think there's no correct drivers in it.


I plugged my 1030sw into my computer and while it was recognized, I couldn't access the camera to download any of the pics. Even when I went to "My Computer", it didn't appear but Device Manager showed that it was plugged in and "working fine".
I unplugged the camera and plugged it back in. This time, I chose the "PC" option, then clicked "right arrow" and selected MTP option instead of Storage option and then I was able to extract my photos.
Hope that helps

Dec 08, 2010 | Digital Cameras

1 Answer

My camera, M1063, will not turn on and the battery will not charge when I plug in the USB charging adaptor. I have only had the camera two months and it seemed to be working fine until a week ago or so. I...


The Camera should have came with a U-8 USB cable

Connect your camera to a Computer via USB cable and when it starts blinking green it means that it is charging

Charging thru Computer is way better....

Sep 22, 2009 | Kodak EASYSHARE M1063 Digital Camera

2 Answers

My sony cybershot T2 is no longer recognized by any computer I connect it to via USB. But when I connect my sister's camera (also a T2), it works fine? please help


You may have a bad USB in your camera connector in your camera. Any repair shop should be able to repair for less than $50.00. Also check that you do not have a bad cable. You may also want to try on a different computer than yours. if it works you may have a driver or USB conflict with your computer.

Jul 02, 2009 | Sony Cybershot DSC-T200 Digital Camera

2 Answers

Disk says not enough space on disk to finilize?


Each time you execute finalization, the disc remaining space will decrease by approximately 13 MB. If you don’t have enough room, it won’t allow you to finalize the disc.
To finalize this disc, you have to delete some pictures to make enough space. But don’t worry, before you delete those pictures, you can save them to your computer.
Find out the CDs came with your camera, refer your manual page 51 - 61 to install ‘PIXELA PTP Manager’ , connect your camera and computer with USB cable, and copy some pictures to your computer, then delete the pictures on camera side. If still not enough room, copy more and delete more. make it enough to do the finalization.

Apr 07, 2009 | Sony Mavica MVC-CD250 Digital Camera

1 Answer

Memory card problem


wheather you check in computer repair shop is their any virus present in memory card? format your memory card! check virus is present in your computer or not! ?Try it!

Jul 11, 2008 | Nikon Coolpix S3 Digital Camera

1 Answer

Memory card problem


Sometimes flash memory can be exhausted, so to speak, and will stop functioning. This is all you can do to get your pictures back. After that try running a format and then the error check tools under the tools tab in the right click properties window.

Download a program called FreeUndelete from here and install it but before you open it, connect your MP3 player or insert your SD card. After you start the program up, select the drive letter that represents the memory you want to scan for deleted files.Click the scan button above the list and wait. If there's too many results, then look near the bottom of the window. There should be a"Filter found files" line where you can enter in the file type of the photos you lost. It probably should be this: "*.jpg" Once you have found the files you want to recover, create a folder you want to save them to in your My Documents folder and copy the path to that folder by right clicking on it then clicking properties. The path you need to copy is the line called Location (don't actually copy "Location: ".Just what's after it :p ) Now paste it in the line called "Undelete selected file(s) To" under the "Filter found files" line. Make sure you paste over the existing text. Finally, click the Undelete button to the right and Viola! check the files out in the folder you created in your My Documents folder.

Jul 09, 2008 | Kodak EasyShare C633 Digital Camera

1 Answer

I need to download software for my camera to my laptop.


Go to www.polaroid.com
select your country
click support
enter your model number - i531
click the picture of the i531 camera
under get software, click i531 Driver
click download now
save to your machine & install



Jun 17, 2008 | Polaroid i531 Digital Camera

1 Answer

Memory card problem


The only solution left is to get a card reader and insert the card in the card reader.

when the card is detected it will show a removeable drive in My Computer. Right click on the removeable drive and click on properties....now click on the the tab which says Tools......now under error checking click on Check Now......now click both the option that is Automatically fix the system errors and Scan for and attempt recovery of bad sectors.

After the scan is complete the card will work fine.

May 30, 2008 | Kodak EasyShare C633 Digital Camera

2 Answers

Memory card problem


Assuming your camera acts like a removable drive when connected to the PC try the following.

  1. Right click the removable drive(your camera) in my computer and go properties>tools>error checking>tick both boxes>ok
  2. Wait till it finishes and check if you can now view the contents of the card. And copy to safe place straight away.
  3. Try http://www.officerecovery.com/freeundelete/ to recover any deleted files or fragments of damaged files.
  4. Let me know if any of this works.

 

Oct 22, 2007 | HP Photosmart M525 Digital Camera

Not finding what you are looking for?
Samsung Digimax S730 Digital Camera Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Digital Cameras Experts

halotheracer
halotheracer

Level 2 Expert

68 Answers

ptpumpman

Level 3 Expert

406 Answers

teddyboy

Level 2 Expert

413 Answers

Are you a Samsung Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...