Question about GE 29439GE2 Corded Phone

1 Answer

Need to reverse line 1 and 2 so that line 1 is the primary number

Currently, incoming and outgoing calls answer and pick up on line 2, which is our roll-over line. We would like to change this so that they pick up on line 1 and rollover to line 2. Our previous phone had no problem, so we know it is not a line problem.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 97 Answers

You could swap at the demarc(where telco responsibility ends) usually a box with screw down lugs one side marked customer the other marked phone co.

Posted on Jul 24, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have BT line and have call divert but can't remember how to divert calls, HELP please

Check which services are active [System X] *#001#
Charge advice (before call) *40* (Number)
Charge advice (All calls) *411#
Charge advice (During call) "R"(to hold call) *40#(Call will be reconnected)
Cancel all calls charge advice #411#
Reminder call *55*(Time in 24 hour format)#
Cancel reminder call #55#
Call Divert - all calls - activate *21*(Number to divert to)#
Call Divert - all calls - to check *#21#
Call Divert - all calls - to cancel #21#
Call Divert - on busy - to activate *67*(Number to divert to)#
Call Divert - on busy - to check *#67#
Call Divert - on busy - to cancel #67#
Call Divert - on no reply - to activate *61*(Number to divert to)#
Call Divert - on no reply - to check *#61#
Call Divert - on no reply - to cancel #61#
Call waiting on *43#
Call waiting off #43#
Call waiting - to check condition *#43#
Call waiting - to answer 2nd caller Recall + 2
Call waiting - remove beeps during call Recall + 0
"Ring back" (Camp on busy) 5
Cancel ring back #37#
Caller display on *234#
Caller display off #234#
BT call minder (voice mail) 1571
Check called number 1471
Release CLI 1470 + dialled number
Withhold CLI 141 + dialled number
Access "Choose to refuse" 14258
Call barring on (outgoing) *341 + option number #
(options are 1 = allows 999 and operator, 2 = allows 999 & local, 3 = allows 999 & STD, 4 = bars all operator calls, 5 = bars *, 6 = bars premium adult lines, 7 = bars premium information lines)
Call barring off (outgoing) #341*(PIN code)#
Incoming calls barred off [System X] #261#
Incoming calls barred on *261#
Incoming calls barred off #261*(PIN code)#

Feb 19, 2015 | BT Lands Phones

2 Answers

Panasonic KX-T7730, we have a 824 phone system and cordless handsets (kx-tg1711) we cannot make outgoing calls on these handests but can take incoming calls and can transfer calls. how do we programme

  • Locate the program and auto-store button on your telephone. You will be using these to customize many of the features on your KX-T7730. The program button is used to enter or exit programming.

  • 2

    Program your outgoing line preference, i.e., the line you prefer to seize when you go off hook. Press "Program" "1" "1" "store" for no line. Press "Program" "1" "2" "Store" for an idle outside line. Press "Program" "1" "3" "Outside Line Number" "Store" for an assigned outside line. The outside line number will be a single or double-digit number that is set through your phone system.

  • 3

    Program your incoming line preference, i.e., the line you prefer to answer when you go off hook. Press "Program" "2" "1 "Store" for no line. Press "Program "2" "2" "Store" for ringing line. Press "Program" "3" "Outside Line Number" "Store" for an assigned outside line.

  • 4

    Program your flexible CO buttons. These are the inner row of 12 lighted buttons. Your outside lines need to be programmed to these--you can choose any of these 12 buttons in any order. Press "Program" "CO Button" "0" "Outside Line Number" "Store." The outside line number will be a single or double-digit number that is set through your phone system.

  • 5

    Program any other unused flexible CO buttons for an extension number or any frequently dialed phone number. Press "Program" "CO button" "1" "Extension Number" "Store" or "Program" "CO Button" "2" "9 + Phone Number" "Store". A "9" must be entered at the beginning of a phone number to tell your phone system to seize an outside line before dialing, e.g., "9-1-212-555-1234."

  • 6

    Locate the programmable feature buttons (the row of 12 solid buttons on the right). These buttons are basically one-touch buttons that can be set for extension numbers or phone numbers. Press "Program" "(PF) Button" "Extension Number" "Store" or "Program" "(PF) Button" "9 + Phone Number" "Store." Remember to press "Program" again to exit programming.

  • 7

    Locate your "FWD/DND" button. This button is used for setting "Call Forward" or "Do Not Disturb" on your telephone. To set call forwarding, go "off-hook" either by lifting the receiver or pressing speakerphone. Make sure you go to intercom and not an outside line. To forward all calls, go off-hook, press "FWD/DND" "1" "extension number" (the extension number that you wish to forward all your calls to) "#". After you hear a confirmation tone, place the receiver on-hook. The steps to set call forwarding for busy/no answer are the same as above, except you will press "2" in place of "1". To cancel call forwarding, press "0" in place of "1".

  • 8

    Program "Do Not Disturb," which stops your phone from ringing--any callers will just hear a DND tone. To program, go off-hook, press "Program" "4" "#" on-hook, to set. Press "0" instead of "4" to cancel.

  • 9

    Locate the message button--this works in coordination with your message light at the top right of your telephone. If the light is lit, press "message" to hear a message left to you either by another extension or a voice mail system. The message button can only be programmed as a message or one-touch button. To program as a message, press "Program" "Message" "3" "Store." To program as a one-touch, press "Program" "Message" "1" "Extension Number" or "Program" "Message: "2" "9 + phone number."

  • 10

    Return your KX-T7730 to its default settings by pressing "Program" "#" "*" "Store."

  • Read more: How to Program a Panasonic KX T7730 '

    Nov 23, 2011 | Panasonic KX-T7730 Corded Phone

    1 Answer

    My company has an Avaya phone system that uses Partner 18d phones. When you pick out the receiver the phone would go to one of our 4 outside lines, but recently on ext. 10 when you pick up the receiver it...

    All releases of Partner
    Lets say that you currently pick up line 1 to make an outgoing call, but you want to pick up your last line (in this case we will say we have 6 phone lines).
    This feature is called "Auto line select"
    To program Auto line select:
    From extension 10 or 11:
    Press feature 00
    Enter the extension number of the extension you need changed.
    press ** (start, star)
    Then the order you want the lines to get picked up
    Then ** (star, star) when done
    When finished, press feature 00 to get out of programming.
    So, in this example I would enter my extension number (22) and press ** (star, star) and press line 6, line 5, line 4, line 3, line 2, and line 1. Then I press ** (start, star) to signify that I am done programming Auto Line Select. And feature 00 to get out of programming.
    Easy as pie.

    Aug 20, 2011 | Avaya 700340193 Corded Phone

    1 Answer

    How do I reprogram the phone to ring when a new call comes in, default to a certain line, and show caller id when a call comes in.

    The answer to the Caller ID question:
    Depend on the type of system that the phone is connected to. Late model Partner ACS equipment will display Caller ID info between the first and second rings, provided that the telephone line is plugged into a module that supports Caller ID.

    The answers for the other 2 questions are taken directly out of the Partner ACS Programming Guide which is available for free download at Avaya's website.

    Ther answer to the incoming call line ringing question:
    Again, depends on the system. For the Partner ACS:

    1) Press FEATURE 00 at extension 10 or 11.
    2) Enter the number of the extension to be programmed for Line Ringing.

    The green lights next to the line or pool buttons show the current Line Ringing settings for all

    lines or pools assigned to the extension. (If a line or pool is not assigned to a button, the green

    light next to that button is off.) The following ringing options can be shown by the green light

    next to the line or pool button:

    ? Immediate Ring - on steady

    ? Delayed Ring - flashes slowly
    ? No Ring - flutters quickly

    3) Press the line or pool button until the button light shows the correct setting (the setting for the
    currently selected line or pool also appears on the display).
    4) Continue programming, or exit programming mode.

    Line selection:

    For incoming calls, the line selection (hunt sequence) is set by the local service provider). For outgoing depends on the system. For the Partner ACS:

    1) Press FEAURE 00, SYSTEM PROG, SYSTEM PROG, CENTRAL PROG at extension 10 or 11.
    2) Enter the number of the extension to be programmed for Automatic Line Selection.
    3) Press **.
    4) Press the line, pool, or INTERCOM buttons in the desired order. The valid entries for Automatic
    Line Selection
    depend upon the type of extension:

    ? Key Extension: Outside system lines, Left Intercom (the factory setting)

    ? Pooled Extension: Pool 880 button 1, button 2, Left Intercom, Right Intercom (the factory

    setting), Pools 881-883, individual lines

    For each button pressed, a display similar to the following appears:

    Automatic Line Selection

    5) To exit Automatic Line Selection, press **.
    6) Press CENTRAL PROG and enter a new extension number, or exit programming mode.

    Changing line ringing and line selection are tasks that are normally reserved for the Administrator of the telephone system.

    Jan 06, 2011 | Lucent 18D Corded Phone

    9 Answers

    I want incoming and outgoing call details of my cell number 9621010060. its a airtel network. its humble reuest please as soon as possible. my email i.d is

    my airtel prepaid no is 918894255042 Please send call detail incoming and outgoing last 3 months its humble request as soon as possible. my email I.D. is

    Sep 15, 2010 | Lands Phones

    1 Answer

    What do I buy to use 2line phone and separate fax?

    You can buy a 2 line phone, but to use the fax/dsl line for voice, you will also need a line sharing device.

    "The stick" is a good brand....

    All it does is recognize if an incoming call is a fax or a voice call. If fax it would go to a fax port on the stick. If voice, it comes out the voice port which you can call on.

    The same rules apply to this line....if something is using it, the next call will get busy......But now you could have the phone company "Hunt" your line 1 to line 2 (fax/dsl) if line 1 is busy.......hence...2 incoming lines....

    Apr 14, 2009 | RCA 25201RE1 Corded Phone

    1 Answer

    Call forwarding for NorStar m7310

    You have to know how to get into programming, and it depends on the type of telephone lines you have... if you have regular analog lines, on a out bound call transfer there is going to be line degragation. Meaning that the outgoing call is not going to be of the best quality.

    Secondly, you have to see how many telephone lines you have, if you have 3 analog trunks, with a call forwarding to a cell phone, you will be using up 2 lines... 1 incoming and 1 outgoing to your cell. This leaves 1 trunk for incoming or outgoing callers.

    Jan 22, 2009 | NorStar M7310 Phone

    1 Answer

    Picking up messages remotely

    Try this...
    See if this works for you.

    Remote Operation
    When you are away from home, you can operate your answering system with any
    touch-tone telephone.Use this function to check for recorded messages, to play or
    delete messages, even record a new greeting message.
    1) Call your telephone number.
    2) During the greeting message, press 0 and enter your PIN code.
    3) The answering system announces the current time and the number of messages
    stored in memory. Then you hear "To play incoming message, press zero two.
    For help, press one zero."
    4) You may continue to listen to the voice prompts, or you may select a command
    from the following chart:

    Command Function
    0 then 1 Repeat a Message
    0 then 2 Play Incoming Messages
    0 then 3 Skip a Message
    0 then 4 Delete a Message
    0 then 5 Stop Operation
    0 then 6 Answering System On
    0 then 7 Memo Record/Stop*
    0 then 8 Greeting Message Record/Stop*
    0 then 9 Answering System Off
    1 then 0 Voice Prompts

    If you forgot to turn on answering system the directions for that are here:

    Turn on the Answering System Remotely
    If you have forgotten to turn on your answering system, you can turn it on remotely
    from any touch-tone telephone.
    1) Call your telephone number.
    2) Wait ten rings until the system answers. You hear intermittent beeps.
    3) Press 0 and then enter your PIN code. The answering system announces the
    number of messages stored in memory. You hear "To play incoming message,
    press zero two. For help, press one zero."
    4) Press 0 then 6 to turn the answering system On. You hear the outgoing message
    and a confirmation tone.
    5) Hang up the phone; subsequent calls will be answered by the system.

    Dec 12, 2008 | GE 25942GE2 Cordless Phone System

    1 Answer

    My answering system and my instructions are all in won't pick up

    is the incoming phone line plugged into the answering machine directly? the answering machine should then be plugged into the phone. the signal comes through the answering machine then to the phone. you may have the connections reversed on the answering machine. check those connections.

    Nov 26, 2008 | GE 27831 2.4 GHz Twin Cordless Phone

    Not finding what you are looking for?
    GE 29439GE2 Corded Phone Logo

    Related Topics:

    183 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top GE Lands Phones Experts


    Level 3 Expert

    98796 Answers

    Cindy Wells

    Level 3 Expert

    4804 Answers


    Level 2 Expert

    230 Answers

    Are you a GE Lands Phone Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides