Question about Canon imageRUNNER 3300 All-In-One Laser Printer

2 Answers

E602-0001 Replaced the hard drive and installed software and now the machine is dead. This is actully the second machine I've had this happen to. I've checked all my connections and I have the current software. Now we are at a loss. Please help.

Posted by on

  • Jenny Murphy
    Jenny Murphy Aug 04, 2008

    Well The machine had power but the screen was blank. But I cleared that up, but now the machine is giving me a E602-0003. Now we replaced the harddrive and downloaded the software and the machine was fine, when the customers network guy tried to access the network the machine coded again. So with that happening we changed the network card. That let us access their network, but now gives us the E602-0003 code. I have reconnected everything(harddive connectors) and it will allow them to copy, print, and scan to Email now, but the network guy wasn't in so I haven't got a chance to see what he is doing to cause it to code out.


2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Turn off the copier and press 1 and 9 key then turn on, wait few hours and finally download mode came. then switched off and switched on. then problem sloved

Muthu, India

Posted on Aug 13, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 57 Answers

What do you mean the machine is dead? There is sign of power at all?

Posted on Aug 03, 2008

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Installing a new blank hard drive in a DesignJet

The hard drive is the formatter in the T610.
HP has a special operating system software loaded on the hard drive, so you can't just format a blank one and install it.

The whole formatter assembly will need to be replaced.

Mar 15, 2014 | HP Designjet T610 InkJet Printer

1 Answer

Installing a new blank hard drive in a DesignJet T1100,T610

The T610 hard drive is the formatter and has a special operating system software installed on if from HP. You can't format a hard drive and install the whole formatter assembly needs to be replaced when the hard drive goes bad...

Mar 15, 2014 | HP Designjet T610 InkJet Printer

1 Answer

Lanier 5622, "WAIT" apear and nothing happen...

When the machine stays at the "Please Wait" message and nothing else happens, the most likely cause is the hard drive. The hard drive will need to be replaced in order to restore full functionality. You can disconnect the hard drive to make the machine work in the meantime, but you'll lose some functionality.

Aug 23, 2010 | Ricoh Aficio 2022 All-In-One Laser Printer

1 Answer

Replacing a HDD on printer/copier

You can format the new hard drive after installing it.

It's in the printer menus somewhere.

Feb 24, 2009 | Gestetner DSm627sp All-In-One Laser...

1 Answer

Canon copier ir 3100 cn error code E000602 - 0202

the hard drive containing the software that drives the machine has an error. Corrective steps would be to contact to a Canon technician, who can first try to re-install the software, and if this doesn't work the hard drive has probably crashed, meaning that the drive will need to be replaced and the software re-installed

Jan 23, 2009 | Printers & Copiers

3 Answers

How to replace HDD IR5000??

how to clear hard disk IR 5000 and where i can find hard disk software

Dec 20, 2008 | Canon imageRUNNER 8500 Copier

4 Answers

Sc990on af 2045

SC 990 is a software error. It usually can be cleared by turning the machine off and back on. It occurs when the internal program gets locked up. Sometimes it requires a firmware reload, other times it maybe an indication that your hard drive is on its way out. The best thing I can say, is lets hope it just happened, and will not again!

Mar 19, 2008 | Ricoh Aficio 450 Copier

1 Answer

Error E602-001

The hard drive does need to be replaced and must be done by an authorized Canon service tech (like me) who has access to the system software. The system software ( or firmware) is installed on the new hard drive using Canon's Service Support Tool. Check here to find your local authorized Canon dealer.

Apr 23, 2007 | Canon imageRUNNER 3300i Printer

Not finding what you are looking for?
Canon imageRUNNER 3300 All-In-One Laser Printer Logo

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts


Level 3 Expert

96372 Answers

old marine
old marine

Level 3 Expert

1456 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides