Question about Kirby G4 Bagged Upright Vacuum

3 Answers

G4 kirby My unit just stoped *I think it's the fuse and I don't know where it is HELP!

Posted by on

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 357 Answers
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 116 Answers

Ensure the safety switches are made properly by making sure the front brush assembly is fitted properly, you will see a tag that enters the machine making the front switch, secondly make sure the bag bottom housing is on properly and fully rotated so that its tag makes the switch on the side.
The only fuse is in the plug (UK).
Common fault is the mains lead broken internally, unplug from the side of the machine after removing the little cover where the wire goes in. You can use a kettle lead to test the hoover.
If this does not cure it most likely the motor brushes are worn.

Posted on Jul 25, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Trying to use the carpet shampoo attachment, no manual for the kirby g4 anniversary edition

Posted on Jul 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How and where do find the switch to activate self propel unit in G4 series kirby


To place the kirby G4 into gear - out of Neutral - just press down with your foot, the Gray & Green lever that is labeled N on the left side of the lever, which is gray, and D on the Right side of the lever which is Green (probably for GO). It is located directly below the Power button.

Good Luck

See Pic...

find-switch-activate-self-propel-unit-in-di2jpn2pb5nzkrgf0hzbmyq5-2-0.jpg

Feb 03, 2014 | Kirby Generation 3 Bagged Upright Vacuum

1 Answer

Kirby g4 stoped working


cable has shorted out internally, will need new cable

Nov 18, 2012 | Kirby G4 Bagged Upright Vacuum

1 Answer

I need a diagram on how to assemble gearbox / drive neutral pin pulled out


If you go to this URL http://reviews.ebay.com/CHANGING-THE-BELT-ON-A-KIRBY-G3-G4-G5-GSIX-ULTIMATE-G_W0QQugidZ10000000003720039 almost at the bottom of the page you will see articles having to do with repair of your unit. I think, since you are getting into the unit that deep, you should be able to find some help in these articles. Paul

Oct 11, 2010 | Kirby G4 Bagged Upright Vacuum

3 Answers

Kirby g4 tech drive, when plugged won't come on ,is it the motor or something else ?


Does anyone know if there is a reset button on the Kirby G4? And if there is where it is?

Jan 03, 2010 | Kirby G4 Bagged Upright Vacuum

2 Answers

Won't turn on. How to reset the fuse


Kirbys have no fuses. You either have an electrical problem, physical blockage, or the motor is bad. Can you turn the drive shaft freely when the brushroll head is removed? If not then you have something stuck in the fan chamber or the motor is bad. If it turns freely then it is most likely an electrical problem. Kirbys motors can take a lot of punishment so dont get rid of it. They are normally very inexpensive to repair.

Dec 19, 2009 | Kirby G4 Bagged Upright Vacuum

2 Answers

Fan kit kirby g4 vacuum cleaner


I'm assuming you mean the fan impeller and not the fan that cools the motor...

you can find detailed instructions at this site

http://reviews.ebay.com/KIRBY-VACUUM-REPAIR-HOW-TO-REPLACE-THE-FAN-IMPELLER_W0QQugidZ10000000003711302?ssPageName=BUYGD:CAT:-1:LISTINGS:3

hope this helps!

Jan 13, 2008 | Kirby G4 Bagged Upright Vacuum

1 Answer

Help with shamppoer for kirby g4


this site may be helpful
http://reviews.ebay.com/KIRBY-CARPET-SHAMPOOER-INSTRUCTIONS-MANUAL-DIRECTIONS_W0QQugidZ10000000004594992

make sure the brushes on the shampooer head are spinning and that you have the shampooer head lowered all the way down to its lowest setting.

Jan 07, 2008 | Kirby G4 Bagged Upright Vacuum

2 Answers

Kirby G4 plugged????


Take the bag off of the vacuum, remove the paper bag, clean out the bag tube then put back on. Make sure that the tube is broken, it is, replave it.

Dec 29, 2007 | Kirby G4 Bagged Upright Vacuum

Not finding what you are looking for?
Kirby G4 Bagged Upright Vacuum Logo

192 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kirby Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Roger Potts

Level 3 Expert

694 Answers

Are you a Kirby Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...