Question about Epson ACULASER CX11NF All-In-One Printer

2 Answers

ACULASER CX11NF Photoconductor reset - chip?

Hi, our ACULASER CX11NF says the PCU needs replacing. I see that one can buy reset chips online. Where is the chip on the PCU? Is there a way to bypass the chip, or install a fuse to avoid buying a new PCU, when it is running fine?

Thanks

Posted by on

  • ruderanch1 Nov 10, 2008

    Has anyone tried the reset chip? Does it work without damaging the printer?

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 78 Answers

The reset chip will not provide you with a long term solution to your problem. The photoconductor unit is now full of waste toner and the photoconductive drum, prime charge roller and wiper blade are all worn, this is the cause of the message. Your only real and the correct solution is to replace the Photoconductor unit with a new one. Remember that this is part of the consumable set for this printer and is therefor costed in as part of the cost per page.
Should you proceed with the replacement chip, you will be opening yourself to deminishing quality print and eventual failure of the unit.

Gremlin11

Posted on Dec 10, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Is there way how to cancel the photodrum of my acculaser cx11nf since the print & copy still clear.

Posted on Dec 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

A printer,s ink pad is at the end of its service life


This means the waste ink collection sponge is full. This counter can be reset but it is strongly recommended to replace the ink pad as you will end up with a large amount of ink spilt on your desk if you continue to use the printer after the pads lifespan. It can be quite a large job to change depending on the model. If the printer is not an expensive model it may be more cost effective and less messy to simply replace it with a similar model.

Jan 14, 2017 | The Office Equipment & Supplies

1 Answer

Load clattering on hp 4500 startup


if the boot process takes longer that normal, regularly goes back to reboot or you have other problems it could be a failing hard drive (Save all the files and folders to external hard drive and install a solid state hard drive --no spinning disc to fail)
if it is not that check the cooling fan operation for the power supply or chip-- about the only other things that have movement

Jan 12, 2017 | HP Office Equipment & Supplies

1 Answer

HOW DO I un-lock the scanner on a Brother MFC 7420?


Unfortunately, the MFC-7420 doesn't have a physical lock switch. You need to turn off the all-in-one and wait for the unit to clear its memory. If the error recurs after you press the power button again, wait 30 minutes and try again. (Note: you will lose any faxes that are in memory. See the User Guide page 11-5 to save this information.) You can find the manual on the Brother support page for the MFC-7420: https://www.brother-usa.com/support/ModelInfo.aspx?R3ModelID=MFC7420 . Click on the Manuals & Documents tab. Then click on the Manuals on our Online Solution Center for the English version of the manual. The direct link to the User Guide is currently: http://download.brother.com/welcome/doc000387/ALLFB_UsaEngUsr_B.pdf .

You can also try unplugging the all-in-one for several minutes to reset the error codes. If the error persists, contact Brother if the MFC-7420 is still under warranty (1 year). If it isn't under warranty, consider replacing the unit. The repair costs may be unreasonable.

I hope this helps.

Cindy Wells

Jan 09, 2017 | Brother MFC-7420 Printer

1 Answer

I want to reset this thing


Sorry there is no "reset" for your printing calculator.

May 21, 2015 | Office Equipment & Supplies

3 Answers

How do i solve an error e000-0000 canon ir 2202 please


Dear
Its related to the fixing temp. do the error clear on service mode. then check the fixing film assy. heater circuit contact points for corrosion. Replace it.
Thanks.

Dec 12, 2014 | Canon Office Equipment & Supplies

1 Answer

Error code 3501


HI
I HAVE KONICA C6500
ERROR CODE 3501 and 3802 but know the error 3501
I know it rech high temperature I change the sensor 1 UP fuser roller
and I reset the error, the machine start and stop again with error 3501

Oct 01, 2013 | Konica Minolta Bizhub C 6500 Copier

2 Answers

LSU error SAMSUNG SCX 4725FN


Laser Scanner Unit or LSU is what writes to the surface of the drum. The glass above the cartridge in the machine may be dirty. The mirror motor in the LSU could be bad or needs to be cleaned to spin better. The Laser diode may be faulty.

This is not a user-serviceable issue. You will need to contact Samsung for a service. You can do it online via Samsung website or contact the vendor to see who will they appoint to service the printer to, especially if it is still under warranty.

Jan 27, 2011 | Samsung SCX-4725 Laser Printer

2 Answers

We have forgotten the Administration password for our EStudio 350 & 450. Is there any way of resetting? Thanks Ben


restart machine ,then press the 0 & 8 keys,enter 263, then press Start. You should see admin password on the screen.

May 05, 2009 | Toshiba Estudio 200L Copier

6 Answers

Printer won't recognize cartridge


I had the same problem. I'm not sure but I think I replaced the cartridges when the printer was on because I turned the printer off and removed one of the cartridges. When I turned the printer back on it recognized that cartridge but not the others. I turned the printer off again, rmoved all cartiridges and put them back in when the printer was still off. When I turned the printer on again I had no problems. So...try turning off the printer, rmove all cartridges, then put them back in and restart printer. Hope this works for you .

Nov 28, 2007 | Epson Stylus 2200 InkJet Photo Printer

2 Answers

Okidata Model# GE5253P


An online manual here: http://my.okidata.com/PP-ML320.nsf?opendatabase There is probably a top of form setting which needs to be checked & corrected. I assume you've checked tab/margin settings in your software & printer setup?

Sep 28, 2007 | Matrix Okidata Microline 320 Printer

Not finding what you are looking for?
Epson ACULASER CX11NF All-In-One Printer Logo

4,056 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18331 Answers

Michel Smith

Level 3 Expert

1218 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...