Question about Computers & Internet

1 Answer

KDS FLAT MONITOR

Hello, I have a KDS Model # RAD-5S, The Unit Turns on and you can see video, but after few seconds the pix goes to white. any help will be apreciated

Posted by on

  • Abimael Reyes
    Abimael Reyes Jul 25, 2008

    thanks for your help.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,940 Answers

Best I can tell, the Rad 5S is out of warranty, and you appear to be having a problem with the image inverter.

#1 Try the monitor on another system and ensure that the issue is the monitor, and not the video card it is attached to as the point of failure.

#2 If the monitor appears to be failing, contact a local TV repair shop on a repair estimate. Likely answer is that you can buy a larger better monitor cheaper than you can get the one you have repaired, even if the parts cost is low, due to the bench fee/labot cost of repairs.

Here is one site I like for monitors:

http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=2010190020+4017&name=%24100+-+%24200

Posted on Jul 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Supply power


Hi u can find it vasai (W), mumbai, India. available it. ( If it serial adapter ) sadguru computer system

Dec 17, 2013 | KDS Radius RAD-7 17" Flat Panel LCD...

1 Answer

My KDS RAD-7 power supply calls for a 12v 4.16a which blew out. Can i replace the power supply with a 12v 5a power supply or is that too much?


Hello,

Yes, you an use a 5 amp power supply on the monitor. If you need one we carry them on our site at:
HTML clipboard www.ccl-la.com

I hope this helps you, if so please rate our solution.

Buddy
Corporate Computer
HTML clipboard www.ccl-la.com

Jan 01, 2010 | KDS Radius RAD-7 17" Flat Panel LCD...

3 Answers

My kds k-92mdwb monitor goes black after a few seconds. How can I fix this?


brendadeese, You might be able to repair it. Well your husband or boyfriend maybe. If good with a soldering iron, solder-wick, solder, and $5-$12 in new filter capacitors. You should have visited YOUTUBE for video clips of "LCD monitor disassembly"and "LCD monitor repair" to see just what is involved with making BLACK SCREEN of DEATH go away. Most LCD monitors (98%) use same basic backlighting technology. Here are some repair options for you to ponder over! A. If KDS has a swapout program for BSoD units try it first! B. Contract out the REFURBISHMENT work to reputable local firm that knows exactly what is needed to do the work properly. C. Trade in for new unit. But remember that the tech in the back of the store is going to repair your unit with a little luck and have a nice monitor to give to his kids on Christmas, and won"t need to do it again till Christmas 2011 or 12. I would also recomend a visit to www.ccl-la.com/badcaps.htm to learn what may be the cause of your BSoD. FYI If K92MDWb had a crisp, bright, colorful image just prior to BSoD, try doing the flashlight test so you will know if the units "switch-mode-power-supply" is in "full" or "partial" shutdown mode. 12fixlouie If this was of some help, please rate on fixya.

Nov 23, 2009 | KDS K92mdwb Monitor

1 Answer

My monitor stays on for 6 seconds


Hello,

You have a monitor with a common problem. After a few years some LCD monitors will blow a power supply. The problem is caused by parts called capacitors overheating in the confined space of he monitor. If you are good at electronics repair/soldering you can usually fix he problem. Check out a few pictures on my web site www.ccl-la.com/badcaps.htmYou can take the back cover off your monitor and look for the bad parts,replace any that look like the pictues and your monitor should work fine. The capacitors do need to be installed with the correct + and -connections, note the stripe on the old one and insert the new one the same way. If you don't want to try the repair yourself we offer a repair service for $35 plus shipping. I hope this helps, if so please rate my solution.

Buddy
Corporate Computer
www.ccl-la.com
Over 21 years of computer and printer support/repair

Jul 03, 2009 | KDS Radius RAD-7 17" Flat Panel LCD...

1 Answer

Kds model 780 monitor no signal, power button does not work


My monitor does the same thing at times and sometimes shows "No Signal" and at other times the screen will maintain the images but the backgound color switches to mustard yellow. In each of these cases I have been able to solve the problem by unplugging the power cord from the electical outlet for about three seconds and plugging it back in. I have a KDS model 780 LCD.
GOOD LUCK

Dec 15, 2008 | KDS Radius RAD-5 15 in. Flat Panel LCD...

1 Answer

MONITOR


Nope

I leave the CRT's to someone with electronics training (Something I lack) and documentation of KDS items is pretty hard to get.

SOrry I can't help/

Jul 25, 2008 | Computers & Internet

2 Answers

KDS Moniter


Have you checked your video card or adapter?
Check the settings on the monitor itself.
If you didn't find the problem go into system properties (windows logo + pause)/hardware/device manager. Expand monitor/right click and see if your new monitor is listed. Is there a yellow or red symbol next to it? This would mean a problem, then right click symbol/properties and error will be shown.
Could be a memory issue.
Don't forget to try a "working monitor". This will narrow it down a bit.

Jul 14, 2008 | KDS Radius RAD-7 17" Flat Panel LCD...

1 Answer

Moniter


I resolve a similar problem by unplugging the power cord for three seconds.

Oct 12, 2007 | KDS Radius RAD-5 15 in. Flat Panel LCD...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

398 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...