Question about LG Goldstar LD65EL Dehumidifier
When our dehumidifier is plugged in and turned on, the % Present shows "CH" and the % Set shows "01". The filter, coils, and bucket have been cleaned.
This will need to be serviced. LG has a 5 year warranty on these models. They usually will tell you of a service center nearby which will service it free of charge since it is under warranty. If you do not live near a service center they may ship you a replacement and you send your old dehumidifier back to them. Make sure you have your reciept when you contact them so they can verify it is under 5 years old.
Posted on Aug 04, 2008
Had the same problem and just replaced the part tonight. Part is here: http://www.repairclinic.com/LG-Dehumidifier-Model-LHD45ELY8-ID-865500-Sensor-Thermistor-Parts. You can locate your model # by pulling bucket out of unit. Model number located on a sticker inside of unit. One problem that I ran into was getting the front grill off. -pull the bucket out of unit -two screws will become visible in middle left and right corners. Remove these -once the screws are removed youll need to press in on both sides of the unit. Press in on the metal part of the unit with the base of your hands, close to the edge of where the sides of the plastic grill meet the metal part. There are tabs in that vicinity that'll release the grill. - pull up on the grill gently to release those tabs. Youll see the existing sensor - to get at the sensor you'll need to take the metal cover off as well as the plastic piece in the back. Youll need to unscrew roughly fifteen screws. All of them are easy to spot -once cover is off just trace the sensor wire. Remove sensor from the grill, unplug the cable from the board, unplug the double connector, remove metal covered piece from copper crimp A Couple of notes: You'll notice a a part of the sensor that is inside of a copper crimp.. I used a screw driver to open it up to remove the sensor/pair of pliers to close it The double plug connector was tough to remove. I used a pair of needle nosed pliers to disconnect. Zip ties can be cut
Posted on May 16, 2013
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Sep 21, 2011 | LG LHD45EL Dehumidifier
Sep 13, 2011 | LG LHD459EL Dehumidifier
Sep 07, 2011 | LG LHD659EBL Dehumidifier
Apr 14, 2011 | LG LHD45EL Dehumidifier
Feb 18, 2011 | LG LHD45EL Dehumidifier
Feb 02, 2011 | LG LHD45EL Dehumidifier
Here is a tip that explains what can be happening to make the dehumidifier show that the bucket is full when it is not.
Dehumidifier Problem It shows Bucket Full
Jan 24, 2011 | LG LHD45EL Dehumidifier
Aug 15, 2010 | LG LHD65EBL Dehumidifier
Jul 20, 2008 | LG LD65EL Dehumidifier
1,352 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: