Question about Powercom BNT-1000AP (dspcmbnt1000ap) UPS System

4 Answers

Problem with backup

I can't get my
Powercom BNT-1000AP UPS to go into backup mode. and if i do a selftest either by pressing the power button or using the upsmon. the ups will turn itself off including my machine.

Posted by on

  • Anonymous Apr 29, 2009

    Unit wont go into backup mode, UPS turns all outputs off

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

This is comon for battery malfunction. Replace batteries in UPS.
If UPS go to battery mod(back up mod) when AC power is cut(THIS IS IMPORTANT!), then you got problem with UPS software and\or UPS itself.

Posted on Feb 14, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a similar problem, but mine does go into backup mode when AC power is removed. In my case, the UPS shuts down when the AC power is restored. So that means my inverter is working. I replaced the batteries a couple of months ago and set the voltage jumper to 230V for our local conditions (it was on 220 V and almost always in Buck mode) and it has worked fine since then, except now I have this new problem. A new PC board will cost me more than what I paid for the entire unit so that's not viable. No diagrams are available from Powercom so it appears that if your unit fails, the only option is to fix it yourself, with the help of an electronics hot shot buddy (if you have one) or to replace the unit.

Posted on Sep 26, 2009

Bought it 3 days ago. i had it replaced already at the shop. i will post my results later. got a new already and im charging it right now and using it.

Posted on Jul 26, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 91 Answers

Check the fuse on the ups

Posted on Jul 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My powercom ups canot power on


hi there check the fuse and let me know the condition of that.

Jan 19, 2011 | Powercom BNT-600AP (bnt600ap) UPS System

2 Answers

Hi! Per our UPS problem is when open 3 or 4 hours, then auto Off the UPS. please let me know what the problem. And i need to change the PCB board or just repair the PCB board? Thanks Regards


If you unplug the unit and it powers your PC for 3 or 4 hours then turns off, it is because the batteries are empty and this is normal. If it is plugged-in with power and shuts itself off after a few hours, then the battery cells may be in need of replacing. You can purcase an inexpensive replacement battery here: http://www.upsforless.com/browseproducts/Powercom-Replacement-Battery-Kit-BNT-500A-BNT-500AP-BNT-600AP-BNT-800AP-KIN-425CSU-KIN-625CS.HTML

Dec 01, 2010 | Powercom BNT-600AP (bnt600ap) UPS System

2 Answers

Ups starts beeping


Is there any indicator lights ON showing the fault condition?
This could indicate that the battery has a low charge. Even if you switch off the mains supply and it switches over to the battery, the UPS may shut down after a short time as the battery power (charge) runs out.
If the battery is more than 3 years old then it may be due for replacement.

May 10, 2010 | Powercom BNT-1000AP (dspcmbnt1000ap) UPS...

1 Answer

IN POWERCOM UPS 1500VA I NEED THE VALUE OF THE RESISTANCE R74 , R67, R51,AND R49 THANK YOU


first u have Chaque the color coding of resistance and u fine exact value of resistor.

Mar 15, 2010 | Powercom (BNT-1500AP) UPS System

1 Answer

Powercom BNT 1500AP quit working after power outage


From your description it appears one or more batteries are bad..The circuit breaker on the Power Strip..which more then likely is a 15 Amp..tripped due to over current conditions..check the batteries and reset the circuit breaker..That should take care of it

Dec 28, 2008 | Powercom (BNT-1500AP) UPS System

2 Answers

Battery


It need to replace 2 piece of regular 12V.7A SLA battery. It is easy to buy in the market.

Jul 24, 2008 | Powercom BNT-1000AP (dspcmbnt1000ap) UPS...

Not finding what you are looking for?
Powercom BNT-1000AP (dspcmbnt1000ap) UPS System Logo

434 people viewed this question

Ask a Question

Usually answered in minutes!

Top Powercom Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Powercom Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...