1996 Audi A6 Logo
Posted on Feb 14, 2011

I have a 1996 audi a6 with a v6 engine. One morning i went to start my car an it would not move only in reverse every sense its been sittin for like two weeks than i tried it today randomlyy an it still works in reverse an now 1st gear as well but i obviously cant drive no more than 20 25 miles per. hour bcuz of my RPS's. The tranny fluid is is full an the floor borad where the TCU is located was damp but i dried it an un plugged battery an still only reverse an 1st? what to i do?

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Feb 15, 2011
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Feb 15, 2011
Answers
1
Questions
0
Helped
405
Points
2

Had the same problem with 1997 audi and had the neutral safty switch/multi-funtion switch replaced and has been working great sence. prices vary for switch 250. to 450. so shope around for the part.

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Apr 13, 2011
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Apr 13, 2011
Answers
1
Questions
0
Helped
405
Points
1

I also having prob with the gear.. Are u in malaysia?

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Audi A6 1996 V6 2.6 Petrol - Won't start and fuel pump is not coming on either.

try connecting pump direct to battery to see if pump works if it dose then a fuse or relay check all wire connections
3helpful
3answers

Prob's with my Audi A6 2003 Auto 3.0 V6 (gearbox)

Doubt it as the fault suggests you need to look into the range sensor. If similar to Renault there is a switch on the gearbox that senses where the select lever is (at the gearbox end). If the display is wrong then the sensor needs looking at and either it will need to be adjusted into a set position by moving it, or perhaps the connector to it or wiring to/from it have a fault.
1helpful
1answer

Immobilizer Problem? My 1996 V6 2.8 A6 won't start

search MagicMechanic in orlando n send him an email -heez one of the best techs in the nation-sez if he cant fix it-he buys it
0helpful
1answer

I have A6 2.0 C4 1995..the engine wont start when hot

CAMSHAFT POSITION SENSOR

I have a 1995 AUDI A6 QUATTRO, and it had similar problems which the AUDI repair shop had to fix.
0helpful
1answer

Audi A6 Starting problem

Try starting without touching gas pedal
0helpful
1answer

Will These Spark Plug Wires Work for My Audi?

No. I would go with the cheaper set.
1helpful
2answers

Finding the thermostat on audi a6 se v6 2.6

go to autozone.com they have a system to show you where parts are located and posible solutions to engine problems.
0helpful
1answer

Engine won't start. Doesn't seem to be a battery problem. Plenty of juice. Coincidentally (perhaps) the car was inspected this morning. After an hour's drive to work after passing inspection (no issues...

I had the same thing with my 96 Audi A6 - what fixed it for me was placing a new ground strap between the engine block and the body. It appears the ends of the old cable were corroded.
Not finding what you are looking for?

415 views

Ask a Question

Usually answered in minutes!

Top Audi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...