Question about Samsung Prostar DCS-24B-LCD Corded Phone

2 Answers

Programming DS extension

I have been able to programme using TRSF 107 on most of the buttons, but one shows NONE when pushed and I cannot figure out how to change it to DS (which it was before) I have a couple of buttons like this.

Posted by on

  • Veva Jul 28, 2008

    Thank you so much!!!! At last I have managed it, after weeks of trying.

  • monicele Nov 28, 2008

    the best answer doesn't make sence to me. I need a step by step to program those keys. I have about 9 keys that say none. I so have the customer pasword. but where would i enter it to gain access to these buttons.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Director Badge:

    Uploaded 100 video answers.

  • Expert
  • 213 Answers

I am glad that you managed to sort your problem, I have posted a Video which you may find helpful in the future, Youtube has 60+ similar videos (search abbeytel), or visit www.abbeytelecom.com">

Posted on Jan 11, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 108 Answers

TRSF 107 is for programming " key extenders " like DS 201. Do you have the installer or customer passwords to access the MMC's to program the buttons on the phones ? MMC 722 is used to program individual phones and MMC 723 is used to program the buttons on a particular type of phone ( 12 or 24 button )

Posted on Jul 27, 2008

  • Michael Bowen Jul 28, 2008

    Glad to help, let us know if you have any other questions. ...Mike

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How can i change the time?


Here is a video that shows you how to change the date and time on old and new Samsung telephone systems;

">

Oct 28, 2010 | Samsung Prostar DCS-24B-LCD Corded Phone

1 Answer

While programming buttons on my phone, I want to program a DS extension on button 11. It shows on the display: 11:NONE , I tried the soft keys and the scroll but the curser will not move over to change the...


I have uploaded a video which hopefully will help with your programmimg issue on your prostar DCS, ther are lots more on YouTube which relate to the prostar DCS search abbyetel, or visit www.abbeytelcom.com

Aug 05, 2010 | Samsung Prostar DCS-24B-STD Corded Phone

1 Answer

How to assign and extension to a DSS key on a samsung dcs 12B


Hi, to programme a softkey on the samsung DCS you must first enter customer level programming;

with the handet down press TRANSFER 200, 1234 , 1 to enable, then the blue speaker key,

now type in 722 followed by the extension number of the phone that you want to program, this will be in brackets, next type the number of the button to be programmed.
Next using no.3 on your keypad (to get to D) then +/- again until you see DS follow this with the ext. ie DS210.
Transfer brings you out.

I have posted a video to show you how its done too, you might want to look at the other 60+ videos from abbeytel.

Jun 09, 2010 | Samsung DCS 12 Corded Phone

1 Answer

How to get rid of the none and have it say DS?


these buttons on your extender need to be set as DS buttons. I have uploaded a training video to help you to do this, when you are in programming you are actually setting up the AOM ( Add On Module) more useful videos www.abbeytelecom.com

Sep 21, 2009 | Samsung Prostar DCS-24B-LCD Corded Phone

1 Answer

M7208 How do I programme the button for hands free


Programming is done on 7310, 7324 and 7316 type sets.Enter programming2.gif by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow). The display should now ask for an extension number. Enter extension number you want to change to handsfree.
Press the show key (top right arrow)
The display should say LINE ACCESS
Press the next key (bottom right arrow) .
The display should say CAPABILITIES.
Press the show key (top right arrow) .
The display say foward no answer.
press the next key 3 times (bottom right arrow)..
The display should say handsfree. Press the show key.(top right arrow) change from none to auto
Press the release key when finished

Sep 01, 2009 | NorStar M7208 Corded Phone

1 Answer

How do I programme my buttons and how do set up the phone for hands free use. The phones were moved and the technician set all the phones to the original settings so none of the phones have hands free...


Programming2.gif is done on 7310, 7324 and 7316 type sets.Enter programming2.gif by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow). The display should now ask for an extension number. Enter extension number you want to change to handsfree.
Press the show key (top right arrow)
The display should say LINE ACCESS
Press the next key (bottom right arrow) .
The display should say CAPABILITIES.
Press the show key (top right arrow) .
The display say foward no answer.
press the next key 3 times (bottom right arrow)..
The display should say handsfree. Press the show key.(top right arrow) change from none to auto
Press the heading key (top left arrow) til the display says TERMINALS & SETS again.
enter in next extension to program.
repeat procedure.
Press the release key when finished

Sep 01, 2009 | Nortel Meridian M7208 Corded Phone

1 Answer

Voice mail transfer - retrieval


Hi, at the handset dial TRANSFER 107 then the Voice-mail transfer button on that phone then dial 529. This should work. I've posted a video from http://www.abbeytelecom.com showing how to program the soft-keys there are loads of others on the website

Jan 23, 2009 | Samsung Phone PDCSLCD12B

1 Answer

Lucent MLX-20L Extension Edit


http://dstech1.com/changing-the-name-on-an-extension/

A label can have a maximum of seven characters.
To administer Labels for Extensions from the System Programming console:
  1. Press Menu.
  2. Press System Program.
  3. Press Exit or Start.
  4. Press More or Right Arrow Key.
  5. Press Labeling.
  6. Press Directory.
  7. Press Extension.
  8. Dial the extension number that you want to administer.
  9. Press Enter.
  10. Press Drop.
  11. Enter the label information for the extension number selected.
  12. Press Enter.
  13. Press Exit or Back.
  14. Press Home or Exit to exit programming mode.
Note: When programming on the system programming console, use the buttons next to the display to specify the letters A through I and punctuation. Use the line/feature buttons to specify additional alphanumeric characters for labels. Use the template provided with the System Programming console to see which line buttons correspond to which alphanumeric characters,

Dec 22, 2008 | Lucent Merlin Legend MLX-10D Phone

2 Answers

Pro Star DCS 24 B





SYSTEM ADMINISTRATOR
PROGRAMMING

SET DATE AND TIME DISPLAY Should it become necessary to correct the date and time displayed on all of the keysets, due of time change (twice a year), you must first access the customer programs.
To access customer programs, open system programming using the passcode you have been assigned. (Default passcode is 1234). You must use a (display phone) LCD 12B or LCD 24B keyset. ENABLE CUSTOMER PROGRAMMING topbul1a.gif While on-hook, press TRSF and dial 200. he display shows. ENABLE CUS. PROG.
PASSCODE
: topbul1a.gif Dial the four digit passcode. The display shows: ENABLE CUS. PROG.
DISABLE
topbul1a.gif Dial 1 or press the ▲ on the Volume to enable. The display shows: ENABLE CUS. PROG.
ENABLE
topbul1a.gif Press TRSF. The keyset returns to its idle condition.
The display format is the following:
W (Day of the week): Enter 0 for Sunday and 6 for Saturday.
MM (Month): Enter 01 for January and 12 for December.
DD (Day of the month): Enter a number in the range of 01-31
YY (Year): Enter the last two digits of the year.
HH (Hours): Use the 24 hour clock and enter a number in the range of 00-24.
MM (Minutes): Enter a number in the range of 00-59.
SETTING THE DATE AND TIME 1. Press TRSF and then dial the 505. The display shows: OLD: 1102802:0852
NEW: WMMDDYY:HHMM
2. Enter the new time and date using the above format: OLD: 1102802:0852
NEW: 1102802:0752
3. Verify the time and date and reenter them if necessary OLD: 1102802:0752
NEW: WMMDDYY:HHMM
4. Press TRSF to store and exit programming.
If you have entered invalid data, you will receive an [INVALID ENTRY] message for three seconds. Reenter the correct date and time. If the information you entered is incorrect, repeat steps 1 through 4.

Aug 04, 2008 | Samsung Prostar DCS Phone

12 Answers

Set time and date


hit the feature button (gray, looks like a globe on it) under the display, under the 3 gray buttons in a row.
then **8463
password is 23646
follow prompts :)
hit the hang up (phone with arrow underneath) when fone.

Jan 22, 2008 | Phones

Not finding what you are looking for?
Samsung Prostar DCS-24B-LCD Corded Phone Logo

Related Topics:

268 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Phones Experts

Yoav Shilon
Yoav Shilon

Level 2 Expert

101 Answers

Dakshinamurthy...

Level 1 Expert

23 Answers

Lawrence Oravetz

Level 3 Expert

7686 Answers

Are you a Samsung Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...